TLR 22 With RCRD -5mm chassis mid motor, lots of aluminum and extras $150
#1
TLR 22 With RCRD -5mm chassis mid motor, lots of aluminum and extras $150
TLR 22
RCRD -5mm shorter wheelbase chassis (black)
Rear motor weight set installed.
HRC 3.0 rear hinge pin block installed (also include stock 4.0 LRC block)
Rear aluminum camber block installed
Rear aluminum hexes
Front aluminum bulkhead
Front aluminum caster block and spindles
Brass kick shim
Front serrated wheel lugs.
Avid slipper spur system, with red/white pads
Gear diff(5k oil) installed, will also include ball diff.
Sweep body as shown in pic.
Will include 1 complete set if tires of my choice (white wheels)
Currently setup as mid motor with shorty pack.
Was only used on indoor rubber track. (Never seen dirt!)
SOLD
RCRD -5mm shorter wheelbase chassis (black)
Rear motor weight set installed.
HRC 3.0 rear hinge pin block installed (also include stock 4.0 LRC block)
Rear aluminum camber block installed
Rear aluminum hexes
Front aluminum bulkhead
Front aluminum caster block and spindles
Brass kick shim
Front serrated wheel lugs.
Avid slipper spur system, with red/white pads
Gear diff(5k oil) installed, will also include ball diff.
Sweep body as shown in pic.
Will include 1 complete set if tires of my choice (white wheels)
Currently setup as mid motor with shorty pack.
Was only used on indoor rubber track. (Never seen dirt!)
SOLD
Last edited by negatv1; 04-08-2014 at 08:12 AM.
#2
Pm sent
#3
Updated, and added pics.
#4
PM sent
#6
Is awesome setup, and still available.
Not interested in trades.
Not interested in trades.
#7
I'm still interested in the roller.
Sent a PM.
Sent a PM.
#8
Tech Elite
iTrader: (73)
TLR 22
RCRD -5mm shorter wheelbase chassis (black)
Rear motor weight set installed.
HRC 3.0 rear hinge pin block installed (also include stock 4.0 LRC block)
Rear aluminum camber block installed
Rear aluminum hexes
Front aluminum bulkhead
Front aluminum caster block and spindles
Brass kick shim
Front serrated wheel lugs.
Avid slipper spur system, with red/white pads
Gear diff(5k oil) installed, will also include ball diff.
Sweep body as shown in pic.
Will include 1 complete set if tires of my choice (white wheels)
Currently setup as mid motor with shorty pack.
Was only used on indoor rubber track. (Never seen dirt!)
$150 shipped. This is shipped- consider that as $135 + paying to have it shipped to your door prior to lowballing.
I also have a Tekin Gen 2, Spektrum 6040 servo and Trinity D3.5 "Maxilla" 17.5 stock motor for $300 total shipped.
$375 with mylaps hybrid personal transponder, and the electronics mentioned above. ($80 for Mylaps Hybrid Transponder separately)
PM if interested.
RCRD -5mm shorter wheelbase chassis (black)
Rear motor weight set installed.
HRC 3.0 rear hinge pin block installed (also include stock 4.0 LRC block)
Rear aluminum camber block installed
Rear aluminum hexes
Front aluminum bulkhead
Front aluminum caster block and spindles
Brass kick shim
Front serrated wheel lugs.
Avid slipper spur system, with red/white pads
Gear diff(5k oil) installed, will also include ball diff.
Sweep body as shown in pic.
Will include 1 complete set if tires of my choice (white wheels)
Currently setup as mid motor with shorty pack.
Was only used on indoor rubber track. (Never seen dirt!)
$150 shipped. This is shipped- consider that as $135 + paying to have it shipped to your door prior to lowballing.
I also have a Tekin Gen 2, Spektrum 6040 servo and Trinity D3.5 "Maxilla" 17.5 stock motor for $300 total shipped.
$375 with mylaps hybrid personal transponder, and the electronics mentioned above. ($80 for Mylaps Hybrid Transponder separately)
PM if interested.
Thankx, Bill
#9
I don't have all the parts to convert to rear motor. Built as mid, and pitched the rest from the start.
I don't have a PM from you Grimm1?
Transponder is sold, but everything else is still available.
I don't have a PM from you Grimm1?
Transponder is sold, but everything else is still available.