TLR 22 2wd Buggy Roller and HUGE 22/ 2.0 Parts Lot! over $700 worth, cheap!
11-24-2013, 03:29 PM
#1
TLR 22 2wd Buggy Roller and HUGE 22/ 2.0 Parts Lot! over $700 worth, cheap!
Ok guys, I'm selling my TLR22 2wd Buggy as a roller. It's in great shape, parts were replaced periodically. Chassis is a little worn though, because it was ran on an abrasive track. As an aluminum front camber block, front threaded king pins, inline spindles, 5 degree c-hubs, custom made battery tie-down bar, and I believe front titanium turnbuckles (some may have been replaced with stockers). It has a freshly built, already broken in ball diff with very little time on it, all BFAST internals. Outdrives and driveshafts are in great condition. Comes with a couple sets of near slicks as practice tires (only 1 rear set, but two fronts), front wheels and foams, and a custom painted JCONCEPTS Finisher body, in great shape. All mid motor parts are included, brand new never used. I'll also include a few misc. parts. Has a very good high bite setup on it. Fresh shock oils.
SOLD for all of that.
I also have an insane amount of spares, I priced it out on amainhobbies and it came to over $700. I've split them up into lots, but they are fluid and I can combine/take some from different ones if you'd like.
-Differential Lot. 2 Ball diffs, assembled. Come with BFAST balls/thrust. Probably could use rebuilds, but in good shape. 1 Gear diff, low use, good shape. Also comes with all the parts to build another ball diff, including new bfast carbide main balls, ceramic thrust, and new losi rings. Then a bunch of used rings, balls, etc, should have some use left. Sold
-Shock Lot. 6 Aluminum Shock caps, two plastics with bleed holes, lower shock caps, spring retainers, pink, yellow, and red rear springs, bushings, orings , etc- everything in the picture. $40
-Turnbuckle Lot. Mostly new. 11 HD, 1 titanium. Also a few 22t/22sct links. Grey ball cups, and the shorter steering rack turnbuckle ends. Sold
-Aluminum Lot. Aluminum rear camber block, 3.5 lrc rear toe block, inner hinge pins, front axles. Sold
-Drivetrain Lot. I don't really expect anyone to buy all of them, probably add them to other purchases. Mostly good-near new shape. Includes driveshaft and axle assemblies. $15 for a pair. (2 pairs left)
-2 Losi spurs, 1 AE spur, slipper pads, and motor mount plate. $15
(Tranny Shims and topshaft are SOLD)
-Plastic/ Big Parts lot: 5 Rear A-arms, all good to excellent shape- 4 front arms, 3 are pretty worn, but good in a pinch. 1 new front. Rear shock tower, 2 rear camber blocks, front and rear bumpers, 3 steering racks, few other steering rack parts, 4 rear hubs, 2 three degree c hubs, two 5 degree c hubs, 2 ten degree c hubs, set of inline spindles, front battery brace, rear spur cover, and a chassis protector. $100 will split a bit if needed
Front arms:
So that's the gist. Like I said I'll split/combine parts, just ask. $165 for all the parts left-over 60% off retail and most are new or in great shape.
Open to trades for 1/10 buggy tires, 1/10 ESC and Motors (7.5, 8.5, 9.5 , 10.5, 13.5), shorty, saddle, and regular 2s lipos, 1/8 motor and ESC
Feel free to make offers. And please, PM me if you're interested!
SOLD for all of that.
I also have an insane amount of spares, I priced it out on amainhobbies and it came to over $700. I've split them up into lots, but they are fluid and I can combine/take some from different ones if you'd like.
-Differential Lot. 2 Ball diffs, assembled. Come with BFAST balls/thrust. Probably could use rebuilds, but in good shape. 1 Gear diff, low use, good shape. Also comes with all the parts to build another ball diff, including new bfast carbide main balls, ceramic thrust, and new losi rings. Then a bunch of used rings, balls, etc, should have some use left. Sold
-Shock Lot. 6 Aluminum Shock caps, two plastics with bleed holes, lower shock caps, spring retainers, pink, yellow, and red rear springs, bushings, orings , etc- everything in the picture. $40
-Turnbuckle Lot. Mostly new. 11 HD, 1 titanium. Also a few 22t/22sct links. Grey ball cups, and the shorter steering rack turnbuckle ends. Sold
-Aluminum Lot. Aluminum rear camber block, 3.5 lrc rear toe block, inner hinge pins, front axles. Sold
-Drivetrain Lot. I don't really expect anyone to buy all of them, probably add them to other purchases. Mostly good-near new shape. Includes driveshaft and axle assemblies. $15 for a pair. (2 pairs left)
-2 Losi spurs, 1 AE spur, slipper pads, and motor mount plate. $15
(Tranny Shims and topshaft are SOLD)
-Plastic/ Big Parts lot: 5 Rear A-arms, all good to excellent shape- 4 front arms, 3 are pretty worn, but good in a pinch. 1 new front. Rear shock tower, 2 rear camber blocks, front and rear bumpers, 3 steering racks, few other steering rack parts, 4 rear hubs, 2 three degree c hubs, two 5 degree c hubs, 2 ten degree c hubs, set of inline spindles, front battery brace, rear spur cover, and a chassis protector. $100 will split a bit if needed
Front arms:
So that's the gist. Like I said I'll split/combine parts, just ask. $165 for all the parts left-over 60% off retail and most are new or in great shape.
Open to trades for 1/10 buggy tires, 1/10 ESC and Motors (7.5, 8.5, 9.5 , 10.5, 13.5), shorty, saddle, and regular 2s lipos, 1/8 motor and ESC
Feel free to make offers. And please, PM me if you're interested!
Last edited by Muggydude; 01-08-2014 at 04:19 PM.
12-28-2013, 04:57 PM
#13
I know it's a stretch...100 on the roller...