Durango 4wd Short Coarse (SC), DESC410, Spare & Upgrade Parts Lot
#1
Durango 4wd Short Coarse (SC), DESC410, Spare & Upgrade Parts Lot
ALL SOLD
I am selling the following Spare & Upgrade Parts for the Durango DESC410, DESC410R, and/or DESC410 V2:
#1) RPM Front Arm Set (Retail Value: $14.49)
- These arms are used. They have been "trimmed" with a rotary tool to allow for proper clearance, as when they are new, they do not fit properly.
SOLD
Asking $8.00, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#2)Durango HD Rear Suspension Arm Set (Retail Value: $10.99)
- These arms are BRAND NEW, never been mounted or used. I took them out of the package to save space and keep them in an organization trey.
SOLD
Asking $7.00, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#3) Brass 12gram side weight set w/ mounting screws (Retail Value: $27.99)
- These side weights have been used, but are in great shape and add the much needed rear weight to this very agile 4WD Short Coarse Truck.
SOLD
Asking $14.00, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#4) Durango Rear Slipper-Diff Slipper Plate (Retail Value: $9.99)
- This part is BRAND NEW, never been mounted or used. I took it of the package to save space and keep it in an organization trey. This is a MUST HAVE spare part, as these can easily break by accidentally tightening down the slipper clutch nut too much.
SOLD
Asking $6.50, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#5) Durango Complete 15mm, 1/8th scale shock set (Retail Value: $52.99)
- This is a shock set is originally meant for the front end of the Durango 1/8th scale buggy (DNX408 or DEX408)
- These shocks have been limited internally roughly 8mm to be used as the REAR shocks on the Durango Short Coarse Truck. These 15mm 1/8th scale shocks are a MUST HAVE if you are running dual shorty packs in your Durango. These large shocks give the truck the setup possibilities needed when carrying that extra weight in the back from two shorty lipo packs.
- Aluminum 15mm threaded shock bodies.
- Aluminum Shock Caps.
- Aluminum Threaded Shock Collars.
- Aluminum Shock Seals.
- Spare Shock Pistons.
- Black Springs (58g/mm or 3.27lb/in.), (Retail Value: $4.99)
- These springs have been slightly shortened (heated and compressed on one end) to allow for proper rear ride height out of the Durango 4WD SC Truck.
- Come with the required mounting hardware. (Recommend running with the aluminum shock standoffs and the aluminum shock tower).
NOTE: These shocks WILL still work with the Durango 1/8th Scale buggies (Just remove the limiting spacers underneath the shock piston), and will work on the rear of nearly any 4WD Short Coarse Truck (i.e. SC10 4X4, Losi SCTE 2.0, Tekno SCT410, etc.)
SOLD
Asking $35.00, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#6) Durango Front & Rear Composite Shock Tower Set (Retail Value: $13.99)
- These shock towers are BRAND NEW, never been mounted or used. I took them out of the package to save space and keep them in an organization trey. The mounting ends have had the 1mm lip sanded down to allow for easier mounting of the aluminum standoffs, and to allow for the standoffs to be tightened further.
SOLD
Asking $7.50, Shipped within the Continental USA.
SOLD
__________________________________________________ _______________________
ALL SOLD
Will take $70.00 for EVERYTHING, Shipped!
Please P.M. me, or send me a text message if interested.
-Cameron
1-775-997-8070
I am selling the following Spare & Upgrade Parts for the Durango DESC410, DESC410R, and/or DESC410 V2:
#1) RPM Front Arm Set (Retail Value: $14.49)
- These arms are used. They have been "trimmed" with a rotary tool to allow for proper clearance, as when they are new, they do not fit properly.
SOLD
Asking $8.00, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#2)Durango HD Rear Suspension Arm Set (Retail Value: $10.99)
- These arms are BRAND NEW, never been mounted or used. I took them out of the package to save space and keep them in an organization trey.
SOLD
Asking $7.00, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#3) Brass 12gram side weight set w/ mounting screws (Retail Value: $27.99)
- These side weights have been used, but are in great shape and add the much needed rear weight to this very agile 4WD Short Coarse Truck.
SOLD
Asking $14.00, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#4) Durango Rear Slipper-Diff Slipper Plate (Retail Value: $9.99)
- This part is BRAND NEW, never been mounted or used. I took it of the package to save space and keep it in an organization trey. This is a MUST HAVE spare part, as these can easily break by accidentally tightening down the slipper clutch nut too much.
SOLD
Asking $6.50, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#5) Durango Complete 15mm, 1/8th scale shock set (Retail Value: $52.99)
- This is a shock set is originally meant for the front end of the Durango 1/8th scale buggy (DNX408 or DEX408)
- These shocks have been limited internally roughly 8mm to be used as the REAR shocks on the Durango Short Coarse Truck. These 15mm 1/8th scale shocks are a MUST HAVE if you are running dual shorty packs in your Durango. These large shocks give the truck the setup possibilities needed when carrying that extra weight in the back from two shorty lipo packs.
- Aluminum 15mm threaded shock bodies.
- Aluminum Shock Caps.
- Aluminum Threaded Shock Collars.
- Aluminum Shock Seals.
- Spare Shock Pistons.
- Black Springs (58g/mm or 3.27lb/in.), (Retail Value: $4.99)
- These springs have been slightly shortened (heated and compressed on one end) to allow for proper rear ride height out of the Durango 4WD SC Truck.
- Come with the required mounting hardware. (Recommend running with the aluminum shock standoffs and the aluminum shock tower).
NOTE: These shocks WILL still work with the Durango 1/8th Scale buggies (Just remove the limiting spacers underneath the shock piston), and will work on the rear of nearly any 4WD Short Coarse Truck (i.e. SC10 4X4, Losi SCTE 2.0, Tekno SCT410, etc.)
SOLD
Asking $35.00, Shipped within the Continental USA.
SOLD
__________________________________________________ ________________________
#6) Durango Front & Rear Composite Shock Tower Set (Retail Value: $13.99)
- These shock towers are BRAND NEW, never been mounted or used. I took them out of the package to save space and keep them in an organization trey. The mounting ends have had the 1mm lip sanded down to allow for easier mounting of the aluminum standoffs, and to allow for the standoffs to be tightened further.
SOLD
Asking $7.50, Shipped within the Continental USA.
SOLD
__________________________________________________ _______________________
ALL SOLD
Will take $70.00 for EVERYTHING, Shipped!
Please P.M. me, or send me a text message if interested.
-Cameron
1-775-997-8070
Last edited by SixFeetDeep; 05-27-2014 at 06:09 PM. Reason: ALL SOLD
#6
I sent you a pm