Tamiya TRF 417 V5 Raceberry / NIB Tamiya 417 Parts
10-31-2013, 06:25 AM
#1
Tamiya TRF 417 V5 Raceberry / NIB Tamiya 417 Parts
I picked up a 2nd Yokomo BD7 so no need for this car and parts. PM me if interested.
1. Tamiya 417V5 Raceberry: I bought the kit new this past summer and then installed the Raceberry conversion on it. This is the hard chassis. The Raceberry conversion has the motor mount machined on a lathe so you don’t need to shim it to get the right fit. The spool, turnbuckles, dampers, springs, and servo saver were never used (dampers/springs/servo saver are still unbuillt). Also included are extra front arm, steering knuckle, bumper parts as well as a set of the Roche spool cups (NIB). The kit tools, manuals, box, and 3 sets of sticker sheets are also included. This was run a few times and as you can tell by the pixs it looks new. Price dropped to $417 shipped.
2. Tamiya 417 Parts Lot: You never have to buy spares again for your 417 (also fits 416/Evolution V) . Most of the items are NIB and most of the open items are new. If you price this out from any of the online retailers this is easily $400. SOLD. I'm not interested in splitting this up. Below is a list of what you get.
Part # Description Qty
New in Package
53928 Short Reversible Suspension Arm 2
51353 TB-03 D Parts (Suspension Arm) 1
51332 TRF416 C Parts (Front Upright) 3
51352 TB-03 C Parts (Front Upright) 1
54031 Carbon Reinforced (Hub Carriers 4*) 4
51293 TA05-IFS F Parts (Hub Carriers 4*) 4
51333 TRF416 E Parts (Rear Upright) 4
51354 TB-03 E Parts (Rear Upright) 1
51253 TB Evolution 5 B Parts (Bumper) 1
53475 White Dish Wheels (Offset 0) 1
53917 2.6mm Titanium Suspension Shaft Set 1
53851 46mm Titanium Suspension Shaft 2
53890 Swing Shaft Protector 1
53601 Low Friction 5mm Adjuster 1
19804381 Flourine Coated 5x9 Kingpin 2
19804382 4.5x3.5mm Flanged Tube 2
54070 Aluminum Suspension Mount (1B) 1
54071 Aluminum Suspension Mount (1C) 1
Out of Package
Aluminum Suspension Mount 1B 1
Aluminum Suspension Mount 1C 1
Alumunum Suspsnsion Mount 1E 1
Aluminum Suspension Mount 1F 1
Split Suspension Mount 1XA/A 1
Split Suspension Mount 1XC/C 1
1mm Suspension Mount Shim 1
0.5 Split Suspension Mount Shim 1
1.0 Split Suspension Mount Shim 1
1. Tamiya 417V5 Raceberry: I bought the kit new this past summer and then installed the Raceberry conversion on it. This is the hard chassis. The Raceberry conversion has the motor mount machined on a lathe so you don’t need to shim it to get the right fit. The spool, turnbuckles, dampers, springs, and servo saver were never used (dampers/springs/servo saver are still unbuillt). Also included are extra front arm, steering knuckle, bumper parts as well as a set of the Roche spool cups (NIB). The kit tools, manuals, box, and 3 sets of sticker sheets are also included. This was run a few times and as you can tell by the pixs it looks new. Price dropped to $417 shipped.
2. Tamiya 417 Parts Lot: You never have to buy spares again for your 417 (also fits 416/Evolution V) . Most of the items are NIB and most of the open items are new. If you price this out from any of the online retailers this is easily $400. SOLD. I'm not interested in splitting this up. Below is a list of what you get.
Part # Description Qty
New in Package
53928 Short Reversible Suspension Arm 2
51353 TB-03 D Parts (Suspension Arm) 1
51332 TRF416 C Parts (Front Upright) 3
51352 TB-03 C Parts (Front Upright) 1
54031 Carbon Reinforced (Hub Carriers 4*) 4
51293 TA05-IFS F Parts (Hub Carriers 4*) 4
51333 TRF416 E Parts (Rear Upright) 4
51354 TB-03 E Parts (Rear Upright) 1
51253 TB Evolution 5 B Parts (Bumper) 1
53475 White Dish Wheels (Offset 0) 1
53917 2.6mm Titanium Suspension Shaft Set 1
53851 46mm Titanium Suspension Shaft 2
53890 Swing Shaft Protector 1
53601 Low Friction 5mm Adjuster 1
19804381 Flourine Coated 5x9 Kingpin 2
19804382 4.5x3.5mm Flanged Tube 2
54070 Aluminum Suspension Mount (1B) 1
54071 Aluminum Suspension Mount (1C) 1
Out of Package
Aluminum Suspension Mount 1B 1
Aluminum Suspension Mount 1C 1
Alumunum Suspsnsion Mount 1E 1
Aluminum Suspension Mount 1F 1
Split Suspension Mount 1XA/A 1
Split Suspension Mount 1XC/C 1
1mm Suspension Mount Shim 1
0.5 Split Suspension Mount Shim 1
1.0 Split Suspension Mount Shim 1
Last edited by swimbikerun; 11-06-2013 at 03:57 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
