Durango DEX210, DEX410v3, TEKIN RS PRO, DS1015, LRP 8.5, EXCELLENT CONDITION (Pics)
10-15-2013, 12:18 AM
#1
Durango DEX210, DEX410v3, TEKIN RS PRO, DS1015, LRP 8.5, EXCELLENT CONDITION (Pics)
I have more cars than I can drive (is 10 too many?) and as a result, I am thinning down my collection.
To start, a DEX210 and DEX410v3:
DEX410v3 SOLD
Prices are shipped con US, with tracking.
The DEX410v3 is in exceptional shape. It is fitted to use b44 hubs making it extremely easy to choose wheels and tires.
It has a full set of Gold Barcodes and Holeshots. As you can tell from the flashing on the Barcodes, the tires are barely broken in. The Holeshots are near new as well.
It comes with quite a few extras and new in package parts as you can see in the photos including:
Motor is an LRP 8.5 (never ran over 130)
Tekin RS Pro
Associated DS1015 Servo (perfect for this car)
Battery and receiver shown not included.
Chassis does have some light scuffing from before I got the tray.
I will also include a brand new Team Azarashi Undertray for $25.00 with the purchase of the car. These are $29.00 + Shipping from Japan.
This is a great setup. In all when new, was about $1,000 invested.
Next up is my like new DEX210 roller with extra chassis, and parts.
This car is from the kit and is currently setup for mid motor. SOLD shipped con US.
It includes:
Clear body that is shown is not included: only because it willl necessitate an additional box. If however, you're in the LA area and want to pick up the car, I'll throw it in. As such I'll do the same for the DEX 410v3 (I have an extra BNIP Bulldog body).
If you have a keen eye, you may also notice that I installed Kyosho ball cups and Losi ball studs on two front camber links. This prevents them from popping off and reduces slop.
This setup is a good deal if you were interested in getting the kit - it's just built and comes with about $100.00 in extras, not to mention good tires.
Someone will get a good deal.
With regards to that, please no low ball offers. I don't need the money but simply don't have time for so many cars. I'll be selling more soon. Also, no trades please. I really am trying to reduce my current collection!
Pics below and more to come.
Also will be selling more high quality/top condition/new items. Have some tires and some hard to get Azarashi items. Also have a BNIP b4.2 that's completely built, never touched electronics - just no wheels/tires. Thought I needed it - but again - just trying to tidy up the collection.
DEX 410v3: (note, I placed two of each set of tires on some pics so you can see different color wheels, etc.)
To start, a DEX210 and DEX410v3:
DEX410v3 SOLD
Prices are shipped con US, with tracking.
The DEX410v3 is in exceptional shape. It is fitted to use b44 hubs making it extremely easy to choose wheels and tires.
It has a full set of Gold Barcodes and Holeshots. As you can tell from the flashing on the Barcodes, the tires are barely broken in. The Holeshots are near new as well.
It comes with quite a few extras and new in package parts as you can see in the photos including:
- Brass Weight Kit
- Lunsford Hinge Pins
- STRC Aluminum Shock Collars
- Extra Drive Shafts
- Extra Servo Saver Shaft
- Racers Edge Blue Aluminum Servo Arm
- Custom Painter Body with Custom Decal (see small first pic)
- Team Azarashi Under Tray (Front cut short so I use a little tape in front).
- Loads of plastic parts NIP.
- Box, Stickers, Manual
Motor is an LRP 8.5 (never ran over 130)
Tekin RS Pro
Associated DS1015 Servo (perfect for this car)
Battery and receiver shown not included.
Chassis does have some light scuffing from before I got the tray.
I will also include a brand new Team Azarashi Undertray for $25.00 with the purchase of the car. These are $29.00 + Shipping from Japan.
This is a great setup. In all when new, was about $1,000 invested.
Next up is my like new DEX210 roller with extra chassis, and parts.
This car is from the kit and is currently setup for mid motor. SOLD shipped con US.
It includes:
- DEX210 Kit Roller
- Dimec Chassis (installed)
- Near new Gold Bar Codes and Suburbs (first and only tires to give you an idea of how new).
- Body for +8 (Dimec) Chasis
- Body for standard kit (aluminum chassis)
- RDRP weighted suspension mount (installed dimec chassis)
- RDRP weighted battery mount (installed aluminum chassis)
- Exotek rear hexes
- Exotek Aluminum Gear Cover (fits stock and mod spur/pin combinations)
- FTW Carbon Fiber Ackerman Plate (steering rack)
- RDRP thumb screws
- RC Shox Rear Shock Tower Mod Brace (NIP)
- Parts for RM
- Stickers, Box, Manual, kit tuning pieces, extra NIP dog bones etc.
Clear body that is shown is not included: only because it willl necessitate an additional box. If however, you're in the LA area and want to pick up the car, I'll throw it in. As such I'll do the same for the DEX 410v3 (I have an extra BNIP Bulldog body).
If you have a keen eye, you may also notice that I installed Kyosho ball cups and Losi ball studs on two front camber links. This prevents them from popping off and reduces slop.
This setup is a good deal if you were interested in getting the kit - it's just built and comes with about $100.00 in extras, not to mention good tires.
Someone will get a good deal.
With regards to that, please no low ball offers. I don't need the money but simply don't have time for so many cars. I'll be selling more soon. Also, no trades please. I really am trying to reduce my current collection!
Pics below and more to come.
Also will be selling more high quality/top condition/new items. Have some tires and some hard to get Azarashi items. Also have a BNIP b4.2 that's completely built, never touched electronics - just no wheels/tires. Thought I needed it - but again - just trying to tidy up the collection.
DEX 410v3: (note, I placed two of each set of tires on some pics so you can see different color wheels, etc.)
Last edited by Woulvesbaine; 10-16-2013 at 10:08 AM.
10-15-2013, 12:44 AM
#5
Suspended
new brand DESC410R
new brand DESC410R only RMB 2641
10-15-2013, 07:54 PM
#9
Pm sent
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
