FS: Used 30.5cc Baja 5B w/ Upgrades & Spare Parts - Ready to Run!
10-03-2013, 09:05 AM
#1
FS: Used 30.5cc Baja 5B w/ Upgrades & Spare Parts - Ready to Run!
This Baja started life as a franken-roller a few years ago. It's a mix of HPI and Kingmotor parts. Decided that it's just a little too loud for me, and I don't have the money or patience to convert it to electric right now. 
As it stands, it's running a CY (KM Marked) 2-Bolt 30.5cc motor. ~3.5gal on the motor, starts good and runs strong. Even easier with the included Baja Skunkworks Roto-Start. Just chuck up the starter rod (included) and start it with your favorite 18v+ cordless drill. Must be 18v or greater, or it won't be fast enough. I used a Ryobi that worked great.
The A-Arms are grey nylon KM arms. Durability comparable to the RPM ones.
Upgrades:
DDM Dom Clone Rear Exhaust
Turtle Racing HD Upper Plate
RPM Front Bumper
Hostile MX Front and Rear Tires in HARD Compound
Silverback RC Beadlock Rings
Bad Horsie Shock Covers
GPM Aluminum Bellcrank
30.5kg All-Metal Steering Servo
Metal-Geared (Hitec Clone, I think) throttle/brake servo
1" Axle Extenders (Modified for Safety-Wire Pin Retention)
Walbro WT-668 Carb
Crankcase Outerwears Cover
KillerRC Superbee Remote Killswitch
Venom Racing 5000mah Reciever Battery
Inline Fuel Filter
KM-Branded Air Filter Cover
KM Steel Rollcage w/ RPM Roof Guard
Baja Skunkworks Roto-Start
GPM Aluminum Clutch Bell Carrier
ADA Aluminum Intake Manifold
Scorpion Chassis Brace
Shread Industries Shreadstack Inclined Velocity Stack/Air Filter Mount
ADA Billet Intake Manifold
Comes with a Flysky FS-GT3B Radio and Receiver installed in the buggy. Rechargeable NiMH Batteries are included with the receiver. The FS-GT3B also has the latest modified firmware installed, as well as a new polarizer for daylight readability.
Also included are an absolute ton of spares. Suspension/Front-End parts, axle boots, bolts/nuts/screws, pullstarts, fuel tubing, spark plugs. Way too much to list. A full compliment of spares and then some. Support gear also included, like a wheel nut wrench, easy fuel-mix can, trickle charger for the reciever battery, original 3300mah RX Battery, and a lot more.
Fair warning, the right "Light Pod" is missing, lost it in a rollover and never bothered to replace it. You can get $2 replacements on eBay.
Asking price is $685 plus S&H (Expect $35-$45). I live in Round Lake, IL if you live near me and want to come take a look. More pics available, just shoot me a PM.
As it stands, it's running a CY (KM Marked) 2-Bolt 30.5cc motor. ~3.5gal on the motor, starts good and runs strong. Even easier with the included Baja Skunkworks Roto-Start. Just chuck up the starter rod (included) and start it with your favorite 18v+ cordless drill. Must be 18v or greater, or it won't be fast enough. I used a Ryobi that worked great.
The A-Arms are grey nylon KM arms. Durability comparable to the RPM ones.
Upgrades:
DDM Dom Clone Rear Exhaust
Turtle Racing HD Upper Plate
RPM Front Bumper
Hostile MX Front and Rear Tires in HARD Compound
Silverback RC Beadlock Rings
Bad Horsie Shock Covers
GPM Aluminum Bellcrank
30.5kg All-Metal Steering Servo
Metal-Geared (Hitec Clone, I think) throttle/brake servo
1" Axle Extenders (Modified for Safety-Wire Pin Retention)
Walbro WT-668 Carb
Crankcase Outerwears Cover
KillerRC Superbee Remote Killswitch
Venom Racing 5000mah Reciever Battery
Inline Fuel Filter
KM-Branded Air Filter Cover
KM Steel Rollcage w/ RPM Roof Guard
Baja Skunkworks Roto-Start
GPM Aluminum Clutch Bell Carrier
ADA Aluminum Intake Manifold
Scorpion Chassis Brace
Shread Industries Shreadstack Inclined Velocity Stack/Air Filter Mount
ADA Billet Intake Manifold
Comes with a Flysky FS-GT3B Radio and Receiver installed in the buggy. Rechargeable NiMH Batteries are included with the receiver. The FS-GT3B also has the latest modified firmware installed, as well as a new polarizer for daylight readability.
Also included are an absolute ton of spares. Suspension/Front-End parts, axle boots, bolts/nuts/screws, pullstarts, fuel tubing, spark plugs. Way too much to list. A full compliment of spares and then some. Support gear also included, like a wheel nut wrench, easy fuel-mix can, trickle charger for the reciever battery, original 3300mah RX Battery, and a lot more.
Fair warning, the right "Light Pod" is missing, lost it in a rollover and never bothered to replace it. You can get $2 replacements on eBay.
Asking price is $685 plus S&H (Expect $35-$45). I live in Round Lake, IL if you live near me and want to come take a look. More pics available, just shoot me a PM.
Last edited by WindDrake; 10-11-2013 at 01:11 PM. Reason: Price Reduced!
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
