RC8.2e, Tekin RX8, T8, Futaba
06-30-2013, 01:50 PM
#1
RC8.2e, Tekin RX8, T8, Futaba
*****SOLD****SOLD*****SOLD*****SOLD*****
For Sale:
Super Clean RC8.2E with Tekno Conversion!
I have a super clean RC8.2e with Tekno conversion. The car is 6 races old consisting of two five minute heats and one five minute main. This is the newer RC8.2 kit with updated light weight outdrives. Upgrades include aluminum swing rack, Tekno conversion, and 1.3mm x 8 tapered pistons. The car is near perfect. The outdrives are not showing wear, the diffs are still fresh, nothing bent, nothing broke, and nothing rusted. It does show normal wear for a used car. Some anodizing rubbed off the bottom of the chassis, top of front shock tower, and shock caps.
Car has numerous parts. Included is a parts container with screws, nip standard B plate, Avid bearings, misc suspension and camber parts as well as nip parts seen in the pictures. The car has enough of the important spares to keep you rolling for a while.
Also included is a set of SS AKA Impacts with 90-95% tread left.
Included is a Losi Body painted silver for the Tekno conversion. Its not a perfect fit but was all the LHS had at the time.
I am willing to sell the car as a Receiver ready RTR or separate.
If package deal everything seen in the pics except receiver and transponder is included.
***Low time RX8 with working switch and hotwire programmer.
***Tekin T8 1700kv buggy motor with a 22 tooth tekno pinion.
***Futaba S9351 High Torque High speed servo.
***2x Reedy Wolfpack 4s 3700mah packs. I get 15 minute to LVC on these so a 10 minute main is easily doable.
I have a stock chassis and electric conversion to take it back to a stock 8.2e. The chassis and parts are from a different car and is the older black chassis. I already gave the newer annoed chassis that came with the car to another driver.
So here is your chance to pick up a super nice artr 8.2e for cheap.
Total package
Price is $650.00 including everything listed and in Pictures minus a receiver and transponder. Price it out for yourself including the spare parts, electronics, and batteries. You will find this is a smoking deal.
I will only part the package out once the roller is sold.
Parted out prices are as follows.
RC8.2 Roller with Tekno Conversion, body, and wheels/tires. $325.00
RC8.2e Parts lot $50.00
Tekin RX8 $120.00
Tekin Hotwire $20.00
Tekin T8 1700kv buggy motor $85.00
Futaba S9351 $50.00
Reedy Wolfpack 3700 4s packs $50.00 each have 2.
All Prices are shipped to the Lower 48.
For Sale:
Super Clean RC8.2E with Tekno Conversion!
I have a super clean RC8.2e with Tekno conversion. The car is 6 races old consisting of two five minute heats and one five minute main. This is the newer RC8.2 kit with updated light weight outdrives. Upgrades include aluminum swing rack, Tekno conversion, and 1.3mm x 8 tapered pistons. The car is near perfect. The outdrives are not showing wear, the diffs are still fresh, nothing bent, nothing broke, and nothing rusted. It does show normal wear for a used car. Some anodizing rubbed off the bottom of the chassis, top of front shock tower, and shock caps.
Car has numerous parts. Included is a parts container with screws, nip standard B plate, Avid bearings, misc suspension and camber parts as well as nip parts seen in the pictures. The car has enough of the important spares to keep you rolling for a while.
Also included is a set of SS AKA Impacts with 90-95% tread left.
Included is a Losi Body painted silver for the Tekno conversion. Its not a perfect fit but was all the LHS had at the time.
I am willing to sell the car as a Receiver ready RTR or separate.
If package deal everything seen in the pics except receiver and transponder is included.
***Low time RX8 with working switch and hotwire programmer.
***Tekin T8 1700kv buggy motor with a 22 tooth tekno pinion.
***Futaba S9351 High Torque High speed servo.
***2x Reedy Wolfpack 4s 3700mah packs. I get 15 minute to LVC on these so a 10 minute main is easily doable.
I have a stock chassis and electric conversion to take it back to a stock 8.2e. The chassis and parts are from a different car and is the older black chassis. I already gave the newer annoed chassis that came with the car to another driver.
So here is your chance to pick up a super nice artr 8.2e for cheap.
Total package
Price is $650.00 including everything listed and in Pictures minus a receiver and transponder. Price it out for yourself including the spare parts, electronics, and batteries. You will find this is a smoking deal.
I will only part the package out once the roller is sold.
Parted out prices are as follows.
RC8.2 Roller with Tekno Conversion, body, and wheels/tires. $325.00
RC8.2e Parts lot $50.00
Tekin RX8 $120.00
Tekin Hotwire $20.00
Tekin T8 1700kv buggy motor $85.00
Futaba S9351 $50.00
Reedy Wolfpack 3700 4s packs $50.00 each have 2.
All Prices are shipped to the Lower 48.
Last edited by rnpnick; 07-10-2013 at 08:53 PM.
06-30-2013, 05:38 PM
#3
Hey man I'm super super interested. Ill send you a pm now. I want to buy the entire package.
07-10-2013, 05:35 PM
#6
Just looking at my first 1/8 scale. A few questions
Is this a factory team rc8.2?
Is it missing the rear chassis brace, looks like it in pic?
Does the rear brace if on he tekno v4?
I apologize if these are stupid questions
Thanks
Is this a factory team rc8.2?
Is it missing the rear chassis brace, looks like it in pic?
Does the rear brace if on he tekno v4?
I apologize if these are stupid questions
Thanks
07-10-2013, 07:33 PM
#7
Want to work out a trade? I have shortly packs and a spare d3.5 17.5 with purple rotor and a 13.5 stator
http://www.rctech.net/forum/r-c-item...ckage-l-k.html
http://www.rctech.net/forum/r-c-item...ckage-l-k.html
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
