Agama A8 USA Spec
#1
Agama A8 USA Spec
I am selling an Agama A8 USA Spec buggy for my dad. The buggy has 8-10 races on it and very well maintained. It has just been completely taken apart, cleaned, lubed and fresh fluid, so its ready to go, just add your engine, pipe and electronics and you're good to go.
Option Parts on buggy:
-4289 CNC convex shock caps with bladders
-4819 steel brake system
-1116-W suspension plate inserts-white
-8023 180 degree 2.3 front sway bar
-8024 180 degree 2.4 rear sway bar
-9T pinion/40T ring gear/underdrive rear
-9250 gold titanium front shock shafts
-9251 gold titanium rear shock shafts
-carbon fiber front shock tower
-low profile air filter set + 3 extra filters
-gray/soft rear arms
options not on buggy but are included:
-new carbon fiber rear shock tower
-6231 +2mm hubs
other parts included:
-all stock parts
-NIP front front spindle carrier set
-used front arms
-almost new rear arms
-NIP front bumper
-new but opened rear wing mount set
-3 DE racing skids
-shock ends and balls
-stock fly wheel with nut and collet
-Owners manual
there is $200+ in parts and upgrades.
the body is in decent shape but paint is chipping due to forgetting to prep the body, good practice body. tires in picture are included, beta v-max.
SOLD!!!
Thanks for looking. PM me if you have any questions or need more info/pics.
Option Parts on buggy:
-4289 CNC convex shock caps with bladders
-4819 steel brake system
-1116-W suspension plate inserts-white
-8023 180 degree 2.3 front sway bar
-8024 180 degree 2.4 rear sway bar
-9T pinion/40T ring gear/underdrive rear
-9250 gold titanium front shock shafts
-9251 gold titanium rear shock shafts
-carbon fiber front shock tower
-low profile air filter set + 3 extra filters
-gray/soft rear arms
options not on buggy but are included:
-new carbon fiber rear shock tower
-6231 +2mm hubs
other parts included:
-all stock parts
-NIP front front spindle carrier set
-used front arms
-almost new rear arms
-NIP front bumper
-new but opened rear wing mount set
-3 DE racing skids
-shock ends and balls
-stock fly wheel with nut and collet
-Owners manual
there is $200+ in parts and upgrades.
the body is in decent shape but paint is chipping due to forgetting to prep the body, good practice body. tires in picture are included, beta v-max.
SOLD!!!
Thanks for looking. PM me if you have any questions or need more info/pics.
Last edited by jmaxey51; 04-14-2013 at 06:53 AM.
#4
Guys, this is my buggy, i am having my son sell it for me because #1 he has more trader feed back than me and #2 i just don't have time to respond to all the pm's asking questions. This is the USA spec. buggy, i bought it in October or Novemeber new from Hobby Pro, and built it with the stock set up. My previous buggy was the evo which was a good buggy but the USA is a lot better. I spent a lot of time on set up and only did one upgrade at a time to make sure it made a difference. The biggest difference on this buggy is the shock caps and bladders plus the CF front tower, i also put long shock ends on the rear. All this gave the buggy more droop which really made the buggy handle. I have gone from Just getting into the a-main to running up front with this set up. I do a complete tear down and service on the buggy after every 2 club races. It has been well maintained. I don't have many spares cause it's just not needed with this buggy. PM jmaxey with questions or offers for quickest response. Thanks!
#9
Bump for a well maintained and clean buggy!
#10
Free bump for a friend