FS/FT MBX6T Tekno V4 w HW Sensored 150a 1800 KV Combo, 4s 40c 5000mah lipo
#1
FS/FT MBX6T Tekno V4 w HW Sensored 150a 1800 KV Combo, 4s 40c 5000mah lipo
Well guys up for sale is my freshly put together Mugen MBX6T Tekno V4.
Only reason I'm selling is because of my Losi Mini 8ight being an absolute blast! I'm having just as much fun with it for a whole lot less money, lol!
*****Things you should know. I soldered all the deans plugs on everything. I think i did a good job dealing with the HUGE wires on the batteries and esc. I put black electrical tape on everything. I forgot the shrink wrap on 1 half of one of the deans but i cant remember which one. I did a pretty good solder so i was like "Im not undoing that!" So i just stuck electrical tape on that one. Everything else has shrink wrap plus electrical tape.
I have not check the diffs because everything seems okay and EXTREMELY smooth. The diffs sound perfect and there is no clicking or anything like that.
I have had zero issues with this truck
NO RX/TX*****
Everything gone
1. Sold MBX6T Tekno V4 roller. Has carbon fiber shock towers, sway bars, 3 pinions (geared for ~30 mph on a 15t pinion right now),4 sets of tires with wheels mounted (16 total wheels). 1 set is a total beater pair and needs re-glueing (if possible), 2 sets are 2+ years old with 90% tread left, 1 set I just got less than two months ago when I bought the truck -looks very good with 90-95% tread left. All tires must go with the truck. sold shipped.
still have 3 sets of tires left. 2 are good and 1 is not. Make an offer on them. *I won't refuse an offer $40 AND UP SHIPPED
2. Sold XeRun sensored 150a esc (new black case model) (less than 20 mins total run time on it). I've had it less than a month so it still has 150 plus days left on the 180 warranty. I soldered deans on it. Esc has never been even close to being too hot to touch. My pinion came loose yesterday and cause a little cosmetic blemish on the ESC, (check the pics), nothing wrong with the esc. Sensor wire can come with this or the motor. Sold shipped
PICS OF THE MOTOR AND ESC UP CLOSE CAN BE FOUND IN POST 12, 13, AND 14
3. sold XERUN Sensored Brushless 4274SD Sensored Motor (black can) , same as above for heat and warranty purposes. They were bought at the same time. sold shipped
4. Jr no longer for sale
5. TRADED Two Turnigy 4s 40c 5000 mah lipos,less than 10 minutes total run time on both. I put deans on them both. No puffing and the packs are about 3 or 4 weeks old. TRADED shipped
Only shipping to the lower 48
Ask away with questions through pm and I'll update the thread.
FYI, I apologize for some of the pics... My IPhone has a mind of its own sometimes.
Only reason I'm selling is because of my Losi Mini 8ight being an absolute blast! I'm having just as much fun with it for a whole lot less money, lol!
*****Things you should know. I soldered all the deans plugs on everything. I think i did a good job dealing with the HUGE wires on the batteries and esc. I put black electrical tape on everything. I forgot the shrink wrap on 1 half of one of the deans but i cant remember which one. I did a pretty good solder so i was like "Im not undoing that!" So i just stuck electrical tape on that one. Everything else has shrink wrap plus electrical tape.
I have not check the diffs because everything seems okay and EXTREMELY smooth. The diffs sound perfect and there is no clicking or anything like that.
I have had zero issues with this truck
NO RX/TX*****
Everything gone
1. Sold MBX6T Tekno V4 roller. Has carbon fiber shock towers, sway bars, 3 pinions (geared for ~30 mph on a 15t pinion right now),4 sets of tires with wheels mounted (16 total wheels). 1 set is a total beater pair and needs re-glueing (if possible), 2 sets are 2+ years old with 90% tread left, 1 set I just got less than two months ago when I bought the truck -looks very good with 90-95% tread left. All tires must go with the truck. sold shipped.
still have 3 sets of tires left. 2 are good and 1 is not. Make an offer on them. *I won't refuse an offer $40 AND UP SHIPPED
2. Sold XeRun sensored 150a esc (new black case model) (less than 20 mins total run time on it). I've had it less than a month so it still has 150 plus days left on the 180 warranty. I soldered deans on it. Esc has never been even close to being too hot to touch. My pinion came loose yesterday and cause a little cosmetic blemish on the ESC, (check the pics), nothing wrong with the esc. Sensor wire can come with this or the motor. Sold shipped
PICS OF THE MOTOR AND ESC UP CLOSE CAN BE FOUND IN POST 12, 13, AND 14
3. sold XERUN Sensored Brushless 4274SD Sensored Motor (black can) , same as above for heat and warranty purposes. They were bought at the same time. sold shipped
4. Jr no longer for sale
5. TRADED Two Turnigy 4s 40c 5000 mah lipos,less than 10 minutes total run time on both. I put deans on them both. No puffing and the packs are about 3 or 4 weeks old. TRADED shipped
Only shipping to the lower 48
Ask away with questions through pm and I'll update the thread.
FYI, I apologize for some of the pics... My IPhone has a mind of its own sometimes.
Last edited by richracer2; 04-28-2013 at 11:42 PM. Reason: Motor and esc sold
#6
YGPM
#14
More pics of the Hobbywing combo for ya. Also pictured is parts of my receipt for warranty purposes. I ordered it on March 3 but it didn't ship till around March 14. SO as of today there are about 150 days left on the warranty.
Last edited by richracer2; 04-16-2013 at 04:15 PM. Reason: Pics of motor and warranty