Kyosho 777 SP1, RB Mods Crono RS5, Mugen BII starter and more!
05-04-2005, 06:32 PM
#1
Kyosho 777 SP1, RB Mods Crono RS5, Mugen BII starter and more!
For Sale: Kyosho 777 SP1 with tons of hopups, RB Mods Crono RS5, Mugen BII starter box and more!
A couple months back I bought this buggy from Dylan here on rctech.net, here's what came with it:
-Racers Edge-
front/rear aluminum chassis braces, steering knuckles, front lower hinge pin holders, f/r front bulkhead
rear toe block set, long life susupension bushing set
-King Headz-
shock mounts, steering posts, servo saver
-K Factory-
locknut / screw hinge pins throughout, reversing threads/regular thread hubs
-Advantage Racing Products-
Carbon Fiber: towers, servo tray, front steering stiffner, center diff brace
Original metal towers, radio tray, center brace, kit plastic blocks, spare differential, mounted crimefighter tires
--------------
Since I've had it I've taken it completely apart, cleaned and rebuilt it with the following additions:
- New Diff and shock seals throughout
- New AvidRC bearings throughout (two extra rubber sealed 8x16 bearings, six extra metal sheilded clutch bearings 5x10)
- All screws replaced with Hexcrews allen headed screws, many extras
- New kyosho flywheel and clutch bell, new kyosho aluminum shoes, new kyosho carbon shoes installed, extra set of 1.0 kyosho clutch springs new in package
- New kyosho SP1 engine mount
- New revised front lower a arms installed, spare set of rear a arms in package
- New revised shorter upper front arms installed
- Racers Edge Front and Rear shock towers
- New plastics, mud guards, extra radio box
- New proline wing
- King Headz rear arm mount kit: 1, 2 and 3 degree aluminum antisquat blocks
- three sets of bevel gears new in package
- three outdrive sets, two regular and one center new in package
- jammin airfilter set with two extra foams new in package
- new jconcepts body - trimmed the outside edge only, unpainted
- ofna 1400 mah battery pack, new
- kyosho sp1 manual
- Mounted proline knuckles
Included with the car:
- New RB Mods Crono RS5 - I've had it started 6 times, two total tanks worth starting the break-in process. The weather hasn't cooperated preventing me from fully completing the break in. I can tell even now that this thing is way more engine than anything I've
had before. Even running rich it's got a smooth powerband and I know it will scream when fully broken in!
- New Jammin JP-1 pipe, installed
- Mugen BII pro starter - assembled and used only on this buggy. It will come with two nicad stick packs
--------------
I'm selling this because I don't have as much time and money to race this car like I thought. Our local track's nitro racing has really dropped off this year and this setup is way to nice to leave sitting on a shelf, so I'm looking to sell it to someone who will put it to good use! Since it has been rebuilt it's only seen my driveway for the engine break-in
Asking $750 shipped for everything. That's only $150 more than a new SP1 kit itself! I'd like to sell it all complete, but if there are no takers I'll look at breaking it up and selling some parts seperate
I accept paypal payment or a money order. Pictures will be posted below. I can answer any other questions you have and can take more pictures at your request. If payment is made I most likely can get it shipped out the same day.
Thanks!
A couple months back I bought this buggy from Dylan here on rctech.net, here's what came with it:
-Racers Edge-
front/rear aluminum chassis braces, steering knuckles, front lower hinge pin holders, f/r front bulkhead
rear toe block set, long life susupension bushing set
-King Headz-
shock mounts, steering posts, servo saver
-K Factory-
locknut / screw hinge pins throughout, reversing threads/regular thread hubs
-Advantage Racing Products-
Carbon Fiber: towers, servo tray, front steering stiffner, center diff brace
Original metal towers, radio tray, center brace, kit plastic blocks, spare differential, mounted crimefighter tires
--------------
Since I've had it I've taken it completely apart, cleaned and rebuilt it with the following additions:
- New Diff and shock seals throughout
- New AvidRC bearings throughout (two extra rubber sealed 8x16 bearings, six extra metal sheilded clutch bearings 5x10)
- All screws replaced with Hexcrews allen headed screws, many extras
- New kyosho flywheel and clutch bell, new kyosho aluminum shoes, new kyosho carbon shoes installed, extra set of 1.0 kyosho clutch springs new in package
- New kyosho SP1 engine mount
- New revised front lower a arms installed, spare set of rear a arms in package
- New revised shorter upper front arms installed
- Racers Edge Front and Rear shock towers
- New plastics, mud guards, extra radio box
- New proline wing
- King Headz rear arm mount kit: 1, 2 and 3 degree aluminum antisquat blocks
- three sets of bevel gears new in package
- three outdrive sets, two regular and one center new in package
- jammin airfilter set with two extra foams new in package
- new jconcepts body - trimmed the outside edge only, unpainted
- ofna 1400 mah battery pack, new
- kyosho sp1 manual
- Mounted proline knuckles
Included with the car:
- New RB Mods Crono RS5 - I've had it started 6 times, two total tanks worth starting the break-in process. The weather hasn't cooperated preventing me from fully completing the break in. I can tell even now that this thing is way more engine than anything I've
had before. Even running rich it's got a smooth powerband and I know it will scream when fully broken in!
- New Jammin JP-1 pipe, installed
- Mugen BII pro starter - assembled and used only on this buggy. It will come with two nicad stick packs
--------------
I'm selling this because I don't have as much time and money to race this car like I thought. Our local track's nitro racing has really dropped off this year and this setup is way to nice to leave sitting on a shelf, so I'm looking to sell it to someone who will put it to good use! Since it has been rebuilt it's only seen my driveway for the engine break-in
Asking $750 shipped for everything. That's only $150 more than a new SP1 kit itself! I'd like to sell it all complete, but if there are no takers I'll look at breaking it up and selling some parts seperate
I accept paypal payment or a money order. Pictures will be posted below. I can answer any other questions you have and can take more pictures at your request. If payment is made I most likely can get it shipped out the same day.
Thanks!
Last edited by aaronb73; 05-04-2005 at 06:39 PM.
