FS: Losi 8ight-T 2.0 Race Ready with Extras (Amazing)
#1
FS: Losi 8ight-T 2.0 Race Ready with Extras (Amazing)
I have a very nice losi 8ight-t (truggy) 2.0. This unit has many upgrades and has always been well maintained. It can be traded as a roller or ready to run (minus rx/tx).
It has:
- Custom Painted Bullydog Body (red & yellow)
- Servos: 1 Ace XP 1015 (steering) & Ace 1313 (throttle)
- Engine: Go Engine 3 port. Still has lots of pinch and i've put roughly 2.5-3 gallons through it. This engine has tons of low end, quite amazing really. With dynamite platinum tuned pipe (007HT, recommended by go engines for this model)
- Aluminum wheel carriers (losi brand)
- New radio tray
- Freshly rebuilt shocks (new rubbers, etc, as per losi setup sheets)
- Aluminum Servo Arm
- VP-Pro Turbo Trax Wheels & Tires (barely worn, yellow dish style wheels, balanced)
- Losi Closed Wheel Nuts
- Losi Aluminum Servo Saver
- New Acer Ceramic Bearings
- Freshly cleaned and oiled air filter
- New Yellow Fuel Lines
- Dialed Inc - Truggy Tote Bag
Extras
- Dynamite Bump Box with Yellow Vinyl Skin on Top
I also have a bag of parts that came off it from parts that have been replaced, i will also include.
This is as nice as they come. I've completely disassembled it and cleaned every part. I've also used black lithium grease on every part that requires grease. The diffs have been torn down reassembled with fresh diff oil. Shocks have been completely rebuilt with new shock oil and rubbers including outer rubber boots. Brake disc has been cleaned and calibrated. All genuine losi parts used, i like my parts to all match the brand of vehicle (i'm weird like that). This rig is fully setup to race today.
I would sell this for $450 as a race roller or $650 takes all (with servos, engine, bump box, extra wheels, etc). I have a dynamite bump box that is nearly brand new all setup for this machine, however it does need a new battery. It has twin 750 motors to turn over any engine. I will post some pics here in a few minutes of the rig.
I also have several sets of dish wheels(balanced), barely used that i can include if someone buys the entire package. These are barely used and i believe i have 3 or 4 sets. Each pair costing around $20-25, so thats $200+ in wheels alone.
I'm not 100% sure i'll let this go as i've put my heart and soul into this machine, but if someone were to get it, i can personally guarantee they won't be disappointed. I literally go over every part with a fine tooth comb between uses. It even has new yellow fuel line just put on last week and the tank and engine have been cleaned and oiled. It also includes a new glow plug (odonnell 97t)
FYI its the truggy in my profile pic.
It has:
- Custom Painted Bullydog Body (red & yellow)
- Servos: 1 Ace XP 1015 (steering) & Ace 1313 (throttle)
- Engine: Go Engine 3 port. Still has lots of pinch and i've put roughly 2.5-3 gallons through it. This engine has tons of low end, quite amazing really. With dynamite platinum tuned pipe (007HT, recommended by go engines for this model)
- Aluminum wheel carriers (losi brand)
- New radio tray
- Freshly rebuilt shocks (new rubbers, etc, as per losi setup sheets)
- Aluminum Servo Arm
- VP-Pro Turbo Trax Wheels & Tires (barely worn, yellow dish style wheels, balanced)
- Losi Closed Wheel Nuts
- Losi Aluminum Servo Saver
- New Acer Ceramic Bearings
- Freshly cleaned and oiled air filter
- New Yellow Fuel Lines
- Dialed Inc - Truggy Tote Bag
Extras
- Dynamite Bump Box with Yellow Vinyl Skin on Top
I also have a bag of parts that came off it from parts that have been replaced, i will also include.
This is as nice as they come. I've completely disassembled it and cleaned every part. I've also used black lithium grease on every part that requires grease. The diffs have been torn down reassembled with fresh diff oil. Shocks have been completely rebuilt with new shock oil and rubbers including outer rubber boots. Brake disc has been cleaned and calibrated. All genuine losi parts used, i like my parts to all match the brand of vehicle (i'm weird like that). This rig is fully setup to race today.
I would sell this for $450 as a race roller or $650 takes all (with servos, engine, bump box, extra wheels, etc). I have a dynamite bump box that is nearly brand new all setup for this machine, however it does need a new battery. It has twin 750 motors to turn over any engine. I will post some pics here in a few minutes of the rig.
I also have several sets of dish wheels(balanced), barely used that i can include if someone buys the entire package. These are barely used and i believe i have 3 or 4 sets. Each pair costing around $20-25, so thats $200+ in wheels alone.
I'm not 100% sure i'll let this go as i've put my heart and soul into this machine, but if someone were to get it, i can personally guarantee they won't be disappointed. I literally go over every part with a fine tooth comb between uses. It even has new yellow fuel line just put on last week and the tank and engine have been cleaned and oiled. It also includes a new glow plug (odonnell 97t)
FYI its the truggy in my profile pic.
Last edited by jwm2; 03-08-2013 at 11:09 AM.