F/S FT B4 roller with +8 chassis
01-03-2013, 07:07 PM
#1
F/S FT B4 roller with +8 chassis
Factory team B4 roller SOLD.... SOLD.... SOLD.....
Racers edge rear 1/2 degree hubs
Aluminum front hinge pin holder
New +8 chassis With maybe 3 five minute practice sessions on it
Car was completely disassembled and cleaned when chassis was installed
Diff is smooth
Out drives look good
Shocks were just rebuilt
RPM ball cups
Hot Bodies tires
Battery strap was not replaced when the chassis was installed so it's a little short But seems to work fine
Aluminum servo mounts are not in pics but are included
A few NIP parts included but not pictured
1 set of front arms
1 set 20 degree caster blocks
1 outer hinge pin kit
1 set steering blocks
Racers edge rear 1/2 degree hubs
Aluminum front hinge pin holder
New +8 chassis With maybe 3 five minute practice sessions on it
Car was completely disassembled and cleaned when chassis was installed
Diff is smooth
Out drives look good
Shocks were just rebuilt
RPM ball cups
Hot Bodies tires
Battery strap was not replaced when the chassis was installed so it's a little short But seems to work fine
Aluminum servo mounts are not in pics but are included
A few NIP parts included but not pictured
1 set of front arms
1 set 20 degree caster blocks
1 outer hinge pin kit
1 set steering blocks
Last edited by 1FAST74SHOVEL; 01-03-2013 at 08:04 PM. Reason: SOLD
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
