Hardly Used Fully Upgraded HPI Nitro *Mini* RS4 for Sale
#1
Regional Moderator
Thread Starter
Hardly Used Fully Upgraded HPI Nitro *Mini* RS4 for Sale
Hello. I am selling a barely used FULLY UPGRADED HPI Nitro Mini. It has EVERY hop-up ever made for this car. I purchased this car since my local track started a class for these Nitro Mini's. Due to poor turnouts and little interest (in my area) the class was nullified. I must have used it 5-6 times at most and never used it again. Please note that this car is a COLLECTORS ITEM. HPI does not manufacturer these cars anymore nor does any aftermarket manufacturers produce hop-ups for it anymore. It is simply not sold anymore. Not only is it a very hard to find car but the hop-ups I have on it are IMPOSSIBLE to find. This is an extremely unique car in which all of the hop-parts on it you can only get from me. It has the same status quo as any Tamiya Bruiser or Mountaineer. It is truly one hot commidity.
Here is a list of all the hop-ups it includes:
HPI:
Hard Anodized Aluminum 3mm Fully Countersunk Super Chassis
Front One-Way Differential
Rear Ball Differential
Graphite Upper Deck with Graphite Battery Mount
Graphite Rear Y-Brace
Polished Aluminum Upper Deck Stand-Offs
Hard Anodized Aluminum Super Shocks
Ultra-Tune Orange Stiff Shock Springs (car includes stock soft- Silver Springs as well)
Foam Front Bumper with Polished Aluminum Standoffs
Fiber Brake Disc
BALL BEARING steering
Purple Anodized Aluminum Adjustable Ball Bearing Front Belt Tensioner
Stainless Steel Hingepins For Front and Rear Suspension
X-Pattern Mini Slicks for front and rear
Blue Medium Foam Inserts for X-Pattern Mini Slicks
Mazda Miata Body
WOLFPACK RADICALS:
Purple Anodized Aluminum Adjustable "Rotating Arm" ball-bearing Side Belt Brace
Purple Anodized Aluminum Lightweight Vented Flywheel
Purple Anodized Heatsink Engine Mounts
SEVERAL Purple Anodized Aluminum Locknuts
Blue Aluminum Wheel Locknuts
Purple Anodized Aluminum Knurled-Grip Antenna Mount
MIP:
Front and Rear CVD's
Purple Anodized Aluminum 360 Degree Rear Exhaust Stinger Tuned Pipe and Manifold with 3 mm thick Ultra-Tune Fiberglass Shock Tower
*BRAND NEW, NEVER USED, still in the package* Titanium Nitride Coated Golden Shock Shafts for front and rear shocks
HAMMAD GHUMAN:
Polished Aluminum LIGHTWEIGHT Mid and Rear Belt Shafts
BOCA BEARINGS:
Fully Equipped with Boca Ball Bearings. Every part that requires a-bushing/bearing has a Boca Ball Bearing instead.
KAWADA:
Brushed Aluminum 8-Spoke Wheels
RPM:
Black Ball Cups for Steering tie-rods
MOTOR SAVERS AIR FILTERS:
Motor Savers Air Filter
GENERAL SILICONES:
Purple Silicone Air Filter Mount
Blue Silicone ULTRA SOFT Fuel Tubing
Purple Silicone Tuned Pipe Coupler
TRINITY:
SEVERAL Blue Anodized Aluminum Countersunk Washers
This car will also include the HPI Nitro Star .12 Pull-Start Engine and Mazda Miata body. I have the instructions and all addendums as well. I am sorry, but I am not accepting any trades.
In summary, the car plus all of the upgrades costs over $1100.00 plus tax/shipping new. These parts are no longer manufactured which truly makes this car one of a kind. My asking price for all of this is $269.00 including shipping. The price is negotiable, so make me an offer. I am sorry, but I am not accepting any trades. Thanks!
Here is a list of all the hop-ups it includes:
HPI:
Hard Anodized Aluminum 3mm Fully Countersunk Super Chassis
Front One-Way Differential
Rear Ball Differential
Graphite Upper Deck with Graphite Battery Mount
Graphite Rear Y-Brace
Polished Aluminum Upper Deck Stand-Offs
Hard Anodized Aluminum Super Shocks
Ultra-Tune Orange Stiff Shock Springs (car includes stock soft- Silver Springs as well)
Foam Front Bumper with Polished Aluminum Standoffs
Fiber Brake Disc
BALL BEARING steering
Purple Anodized Aluminum Adjustable Ball Bearing Front Belt Tensioner
Stainless Steel Hingepins For Front and Rear Suspension
X-Pattern Mini Slicks for front and rear
Blue Medium Foam Inserts for X-Pattern Mini Slicks
Mazda Miata Body
WOLFPACK RADICALS:
Purple Anodized Aluminum Adjustable "Rotating Arm" ball-bearing Side Belt Brace
Purple Anodized Aluminum Lightweight Vented Flywheel
Purple Anodized Heatsink Engine Mounts
SEVERAL Purple Anodized Aluminum Locknuts
Blue Aluminum Wheel Locknuts
Purple Anodized Aluminum Knurled-Grip Antenna Mount
MIP:
Front and Rear CVD's
Purple Anodized Aluminum 360 Degree Rear Exhaust Stinger Tuned Pipe and Manifold with 3 mm thick Ultra-Tune Fiberglass Shock Tower
*BRAND NEW, NEVER USED, still in the package* Titanium Nitride Coated Golden Shock Shafts for front and rear shocks
HAMMAD GHUMAN:
Polished Aluminum LIGHTWEIGHT Mid and Rear Belt Shafts
BOCA BEARINGS:
Fully Equipped with Boca Ball Bearings. Every part that requires a-bushing/bearing has a Boca Ball Bearing instead.
KAWADA:
Brushed Aluminum 8-Spoke Wheels
RPM:
Black Ball Cups for Steering tie-rods
MOTOR SAVERS AIR FILTERS:
Motor Savers Air Filter
GENERAL SILICONES:
Purple Silicone Air Filter Mount
Blue Silicone ULTRA SOFT Fuel Tubing
Purple Silicone Tuned Pipe Coupler
TRINITY:
SEVERAL Blue Anodized Aluminum Countersunk Washers
This car will also include the HPI Nitro Star .12 Pull-Start Engine and Mazda Miata body. I have the instructions and all addendums as well. I am sorry, but I am not accepting any trades.
In summary, the car plus all of the upgrades costs over $1100.00 plus tax/shipping new. These parts are no longer manufactured which truly makes this car one of a kind. My asking price for all of this is $269.00 including shipping. The price is negotiable, so make me an offer. I am sorry, but I am not accepting any trades. Thanks!
Last edited by racer rich; 03-22-2005 at 08:43 PM.
#2
I DONT HAVE THE MONEY TO SPEND ON IT, BUT I WOULD ABSOLUTLY LOVE TO SEE PICS OF IT! IF YOU HAVE A CHANCE MAYBE YOU COULD SEND SOME MY WAY THANKS
[email protected]
[email protected]
#3
Tech Addict
Please note that this car is a COLLECTORS ITEM
yes it is!!! i would love to see pics too! even tho i wont be able to buy. if i were ever to go nitro this is the car id get. oh, pics to [email protected] plz thanx.
aww mannn. even with this killer price i cant get it dammmiittt..
yes it is!!! i would love to see pics too! even tho i wont be able to buy. if i were ever to go nitro this is the car id get. oh, pics to [email protected] plz thanx.
aww mannn. even with this killer price i cant get it dammmiittt..
#4
Regional Moderator
Thread Starter
Still available. Thanks!
#5
Regional Moderator
Thread Starter
Still available. Thanks!
#6
Regional Moderator
Thread Starter
Still available. Thanks!
#7
Regional Moderator
Thread Starter
Still available. Thanks!
#8
Regional Moderator
Thread Starter
Still available. Thanks!
#9
Regional Moderator
Thread Starter
Still available. Thanks!
#10
Regional Moderator
Thread Starter
Price is negotiable. Still available. Thanks!
#11
Regional Moderator
Thread Starter
Price is negotiable. Still available. Thanks!
#12
How long is it and why is calleda nitro mini is it that small?
#13
Regional Moderator
Thread Starter
Price is negotiable. Still available. Thanks!
#14
Tech Adept
Dude that little Nitro Mini is BAD A$$ If I had the duckets to drop on a fun car to play with that would be the one! I missed my chance at a nitro mini years ago. Those little suckers are HELLA FAST!
Buddy of mine had one with a Nova Rosi motor in it. The thing was frighteningly quick!
If I had anything to trade for it I would man. That's a cool ride!
Buddy of mine had one with a Nova Rosi motor in it. The thing was frighteningly quick!
If I had anything to trade for it I would man. That's a cool ride!
#15
Regional Moderator
Thread Starter
I am sorry, but I am not accepting any trades.
The price is negotiable. Still available. Thanks!
The price is negotiable. Still available. Thanks!