***Brushless RC18T Mamba Micro Pro CM26 with Lipos***
#1
***Brushless RC18T Mamba Micro Pro CM26 with Lipos***
SOLD
is an tean Associated RC18T. It comes with a Mamba Micro pro ESC and a CM26 6800kv motor. This is in my opinion the best brushless sytem for 1/18 scale. The CM26 series of motors was an exparimental motor line from Castle that never made it to mass production. For the few that have them they have a gem of a motor. It has 26mm can instead of the standard 20mm can that most people run in 1/18 scale. It is a very strong motor that stays cool even when over geared for speed runs. I have had this car over 60 MPH on just 2s and on 3s it is just plain scary! I never had an issues with keeping this motor cool.
Now the car has just been sitting in the garage collecting dust and hasn't been run since the begining of the year. I have a box full of spare parts for it including shock towers, suspnsion arms, gears ect. I also have three lipos for it including two 2s lipos and one 3s lipo one of the has a traxxas plug instead of deans like everything else I have an adaptor for it. I modified the steering to remove the steering slop so no it is fast and reponsive and has a fullsized 1/10 scale servo. I have a few different sets of tire for it including a set of 1/10 scale touring foams and 12mm hex adaptors which is what I used for speed runs. The drive train is bullet proof. I have a set of metal diff gears from thetoyz.com and they have held up very well to brushless power. This is a great little rocket of a car for messing around with. it has an ugly beater body that has taken many 40+MPH cartwheels and is good for protecting what underneath but it doesn't look good. It has a set of RPM shock towers, RPM front bumperand factory team threaded aluminum shocks. It will come with a flysky 2.4 Ghz radio system and a small balance charger capable of charging both 2s and 3s.
Asking $160 for everything shipped inside the lower 48.
is an tean Associated RC18T. It comes with a Mamba Micro pro ESC and a CM26 6800kv motor. This is in my opinion the best brushless sytem for 1/18 scale. The CM26 series of motors was an exparimental motor line from Castle that never made it to mass production. For the few that have them they have a gem of a motor. It has 26mm can instead of the standard 20mm can that most people run in 1/18 scale. It is a very strong motor that stays cool even when over geared for speed runs. I have had this car over 60 MPH on just 2s and on 3s it is just plain scary! I never had an issues with keeping this motor cool.
Now the car has just been sitting in the garage collecting dust and hasn't been run since the begining of the year. I have a box full of spare parts for it including shock towers, suspnsion arms, gears ect. I also have three lipos for it including two 2s lipos and one 3s lipo one of the has a traxxas plug instead of deans like everything else I have an adaptor for it. I modified the steering to remove the steering slop so no it is fast and reponsive and has a fullsized 1/10 scale servo. I have a few different sets of tire for it including a set of 1/10 scale touring foams and 12mm hex adaptors which is what I used for speed runs. The drive train is bullet proof. I have a set of metal diff gears from thetoyz.com and they have held up very well to brushless power. This is a great little rocket of a car for messing around with. it has an ugly beater body that has taken many 40+MPH cartwheels and is good for protecting what underneath but it doesn't look good. It has a set of RPM shock towers, RPM front bumperand factory team threaded aluminum shocks. It will come with a flysky 2.4 Ghz radio system and a small balance charger capable of charging both 2s and 3s.
Asking $160 for everything shipped inside the lower 48.
Last edited by yakfish; 10-11-2012 at 01:06 PM.