*** NIB Kyosho MP9 TKI2 WC Limited Edition!!! ***
#1
*** NIB Kyosho MP9 TKI2 WC Limited Edition!!! ***
I didn't realize this was a WC Limited Edition, so I started a new thread as I wanted to include that in the title....
That's right a brand spanking new Kyosho MP9 TKI2 WC Limited Edition. I bought two and only need one. $750.00 shipped
Here's the specs: http://www.infernosonly.com/Kyosho_I.../kyo31786b.htm
Alright guys, I’m sure some of you looking at this are wondering what it would cost to convert to a TKI3. Keep in mind the one I’m selling is basically the same, but but doesn’t have the battery box or new servo tray but the placement is exactly the same. What I’m getting at is it is just aesthetically different. There is no change in handling from what I can tell…. But if you want the TKI3, here ya go!
Well I’ve taken the guess work out and here it is.
Below are the parts you would need to convert this to a TKI3. The amounts are from Amain. I compared to Ebay and Amain is actually cheaper due to the free shipping. Nice thing is that any order over $25 is eligible for free shipping!!! I also included the Optional front shock tower. It’s kind of pricy. I’m running the TKI2 front tower and haven’t had a problem…
If you don’t need the shock tower, then you can have a NIB TKI3 for $816.23! Plus, the TKI3 is out of stock until 8/31/12….
$19.99 KYOIF480 - Radio Plate (Servo Tray)
$11.75 KYOIF478 - Front Battery Box Set
$11.75 KYOIF479 - Rear receiver box set
$8.25 KYOIF481 - Fuel Tank Stay & Servo Tray Parts
$14.49 KYOIF474B - Side Guard Set
-------------------
$66.23 Total
Optional Front Shock Tower
$79.99 KYOIF477 - Hard Front Shock Tower
----------------------------------------------
$146.22 Total to convert to a TKI3!!!!
That's right a brand spanking new Kyosho MP9 TKI2 WC Limited Edition. I bought two and only need one. $750.00 shipped
Here's the specs: http://www.infernosonly.com/Kyosho_I.../kyo31786b.htm
Alright guys, I’m sure some of you looking at this are wondering what it would cost to convert to a TKI3. Keep in mind the one I’m selling is basically the same, but but doesn’t have the battery box or new servo tray but the placement is exactly the same. What I’m getting at is it is just aesthetically different. There is no change in handling from what I can tell…. But if you want the TKI3, here ya go!
Well I’ve taken the guess work out and here it is.
Below are the parts you would need to convert this to a TKI3. The amounts are from Amain. I compared to Ebay and Amain is actually cheaper due to the free shipping. Nice thing is that any order over $25 is eligible for free shipping!!! I also included the Optional front shock tower. It’s kind of pricy. I’m running the TKI2 front tower and haven’t had a problem…
If you don’t need the shock tower, then you can have a NIB TKI3 for $816.23! Plus, the TKI3 is out of stock until 8/31/12….
$19.99 KYOIF480 - Radio Plate (Servo Tray)
$11.75 KYOIF478 - Front Battery Box Set
$11.75 KYOIF479 - Rear receiver box set
$8.25 KYOIF481 - Fuel Tank Stay & Servo Tray Parts
$14.49 KYOIF474B - Side Guard Set
-------------------
$66.23 Total
Optional Front Shock Tower
$79.99 KYOIF477 - Hard Front Shock Tower
----------------------------------------------
$146.22 Total to convert to a TKI3!!!!
#2
Great seller.and a steal of a deal on a new in box K car.
#5
Tech Regular
iTrader: (7)
Here is what is says:
New on the Inferno MP9 WC Edition:
· Thickened and strengthened front and rear 7075 aluminum CNC machined suspension holders
· Stronger and thicker reinforced 7075 aluminum CNC machined front shock tower.
· Stronger and thicker revised rear shock tower with additional lower control arm mounting positions, from 8 to 10 total.
· Receiver battery modification kit included (IFW423) to duplicate Cody Kings battery setup. Uses a carbon fiber plate that fits perfectly to the servo tray.
· New front lower control arms with re-enforcement using additional material around the inner hinge pin as well as the area around the sway bar mount to reduce the change of a breakage.
· New rear upper suspension arms with added ribs for more strength and stiffness around the ball ends.
New on the Inferno MP9 WC Edition:
· Thickened and strengthened front and rear 7075 aluminum CNC machined suspension holders
· Stronger and thicker reinforced 7075 aluminum CNC machined front shock tower.
· Stronger and thicker revised rear shock tower with additional lower control arm mounting positions, from 8 to 10 total.
· Receiver battery modification kit included (IFW423) to duplicate Cody Kings battery setup. Uses a carbon fiber plate that fits perfectly to the servo tray.
· New front lower control arms with re-enforcement using additional material around the inner hinge pin as well as the area around the sway bar mount to reduce the change of a breakage.
· New rear upper suspension arms with added ribs for more strength and stiffness around the ball ends.