FUTABA CDR Charger Discharger

[Michal101]

I have a virtually Brand new and Pristine Futaba CDR Charger that I have only used a couple of times…This thing is AWESOME, but a little more than what I need…LOL

It is basically a dyno for your batteries!

Specs:

This is the Futaba High Performance Battery Charger and Discharger.
Linear current charger with advanced peak detection
and automatic cutoff circuit.

**Do not use with Lithium Polymer (LiPo) battery packs**

FEATURES: Charges, discharges (see COMMENTS), and cycles 1-8 cell NiCd and
NiMH transmitter and receiver packs
Charges, discharges and cycles 1-36 cell NiCd and NiMH car packs
All charging info including real-time graph plotting is shown on
large backlit LCD screen for touch-free operation after setup
Bar graphs show the average voltage and peak voltage of each cell in
the charging mode, also shows average voltage of each cell in the
discharging mode
Auto cut-off can be programmed for delta peaking, mAh, and
temperature settings
Reverse polarity and overload protection
One year limited warranty

INCLUDES: One Futaba High Performance Battery Charger and Discharger with
Tx and RX charge adapters, charger stand, input cord with alligator
clips, thermo sensor cord, output clips for motor battery, terminal
harness and illustrated instruction manual

REQUIRES: DC power supply 12-16V, HCAP0250, ASTP0121 or CEIP3710

SPECS: Length: 6.7" (170mm)
Width: 6.7" (170mm)
Height: 3.3" (83mm)
Weight: 2.6lbs (1200g)

Measurement: I/O Voltage, Output Current, Peak-Voltage, Average-
Voltage, 3-Division Average Voltage, Internal Resistance, Capacity,
Time, Power Level, Matched Level, Temperature, Humidity
Input: 11-16V DC Minimum 40Ah (power voltage power-off @10V)
Charging Current: DX: 0.1A-12A
Tx & Rx: 0.05A-2A
Discharging Current: DX: 0.1A-40A
Tx & Rx: 0.1A-5A
Battery Range: DX: 1-36 cells/50mAh-9999mAh
Tx & Rx: 1-8 cells/50mAh-2500mAh
Cut Off: Delta Peak and Zero Delta V, Temperature, Capacity, Maximum-
Voltage
Display: Graphic 192x128 LCD with Backlight
Safety Device: Overload, Reverse Polarity Protected and 5 Cooling
Fans


I paid $420 plus shipping for it and I am asking $380 OBO shipped and insured within the US. Sorry but NO trades.

If using Paypal please add an additional 3%.

Please e mail me at michal101@cox.net for a quicker reply.

Thanks, Mike

[Michal101]

Picture of screen with backlight.

[Michal101]

To The Top!

[Michal101]

Hi,

I have had a decent amount of interest, but I have decided to lower the price to
$365 OBO plus shipping.

Please e mail me at michal101@cox.net for a quicker reply.

Thanks, Mike

[Michal101]

BUMP!

[Mr.Dirt98]

Mike this is Eugene and I am interested in the charger. Email me at ezryder93@mchsi.com and we can see if we can work something out. I need another one.

Thanks

Free Bump

[Michal101]

Off to Ebay...

http://cgi.ebay.com/ws/eBayISAPI.dll...sPageName=WDVW