Kyosho MP9e with tekno V4 Brushless
#1
Kyosho MP9e with tekno V4 Brushless
Kyosho MP9e w/ Tekno V4 eConversion
This started out as an MP9 TKI Nitro roller.Its an Ready-to-Run package. All you need its your Radio.
Here is what is included:
-MP9 TKI Nitro roller (including Nitro Chassis and Parts).
-Tekno v4 Conversion
-Tekin RX8 (programmed with v223 firmware)
-Tekin T8 1900kv Motor
-Hitec 7955MG Steering Servo
-Pro-Match 4s Lipo 5000mah 50C
-Huge Parts Lot including (Shock bodies, Springs, Drive Shafts/Axles, Shock Tower etc)
-Proline Slipstream body
-5 Sets of Tires
*Losi Reptile 95% Tread
*PL Caliber M3 70% Tread
*PL Bowtie 70% Tread
*AKA CityBlocks 50% Tread
*PL Inside Jobs 80% Tread
The Tekno system is setup with a Long Shank Pinion for direct drive with motor braking. The mounts and linkages are included to setup Mechanical brakes also.
NO TRADES. NO PART OUTS.
$sold shipped
This started out as an MP9 TKI Nitro roller.Its an Ready-to-Run package. All you need its your Radio.
Here is what is included:
-MP9 TKI Nitro roller (including Nitro Chassis and Parts).
-Tekno v4 Conversion
-Tekin RX8 (programmed with v223 firmware)
-Tekin T8 1900kv Motor
-Hitec 7955MG Steering Servo
-Pro-Match 4s Lipo 5000mah 50C
-Huge Parts Lot including (Shock bodies, Springs, Drive Shafts/Axles, Shock Tower etc)
-Proline Slipstream body
-5 Sets of Tires
*Losi Reptile 95% Tread
*PL Caliber M3 70% Tread
*PL Bowtie 70% Tread
*AKA CityBlocks 50% Tread
*PL Inside Jobs 80% Tread
The Tekno system is setup with a Long Shank Pinion for direct drive with motor braking. The mounts and linkages are included to setup Mechanical brakes also.
NO TRADES. NO PART OUTS.
$sold shipped
Last edited by skyline1015; 07-23-2012 at 08:34 AM.