Mod XO-1 1527/XL2 "Package"

Reply Subscribe

Thread Tools

Search this Thread

06-05-2012, 07:15 PM

millzee

Tech Adept

Thread Starter

iTrader: (2)

Join Date: Apr 2010

Posts: 226

Trader Rating: 2 (100%+)

Mod XO-1 1527/XL2 "Package"

I'm selling the night drifter as a package, it will suit someone with a spektrum transmitter looking for a almost ready to run 100+MPH or a drifter set up, at the moment it's tuned as was in the night drifter movie. I live in a small country town and our roads simply arn't good enough for me to find the models full potential safely, find a long smooth road, a fast car to chase it with and see how fast you can make it go on 8s with high gearing, try putting a few pinion/spur combo's through http://scriptasylum.com/rc_speed/top_speed.html

The pictorial history for the short time I've had the model is here, so you know what your getting.
http://s1219.photobucket.com/albums/...ee/Mod%20XO-1/

The package comes with the listed items below and will not be split, the model and electronic's have only been ran a few times on 4s and 6s with no true load put on the system. Someone with a marine capable Spektrum radio can bind with the MR200 RX, plug in suitable lipo's with 8mm connectors and be off running a muck.

This pic's was just taken it's how you'll get it

Package Includes*

*most parts are new in original pack's

Traxxas XO-1 model #6407 - will come in original box. All book's and manual, bought as a roller, been ran for short testing and night drifter video, it had one ripper crash that broke the rear a-arm and has been replaced with a slash 4x4 arm set. The front splitter hit a concrete and broke during the drift session so that's how it is, cheap fix. http://www.amainhobbies.com/product_...tter-Extension The stock body has only been ran one or two times but has a few scratches and the 12volt waterproof LED body was used one or two times and has scratches but both still look good and function as they should. The stock chassis plate has been replaced with an Xtreme carbon chassis and the upper support the is a Jarmin product. The alloy servo mount is more than strong enough to hold the near new Hitech HS 7955 TG servo that has plenty of grunt. The carbon battery tray has beem made from 2mm and 2.5mm carbon sheet and has rubber foam support, the front section that supports between the lipo and ths strap has seperated from the tray and neesa re-JB weilding but I kept running it with it placed there and all still functions as it should, another 2minute job.

-Neu 1527 1.5d 1500kv brushless motor
-Castle Mamba XL2 electronic speed controller
-Spektrum MR200 RX
1x 34t High Speed pinion, 1x 25t pinion
1x 54t Spur, 1x 50t spur, 2x 46t spur
4x red shocks with green
4x white shocks with blue
2x Cush drive dampers #6465
2x Cush Housings #6464
1x Cush input shaft #6466
2x Drive hubs #6888
2x Drive hubs #6888x
2x rear ring gears #6879
2x ring gear diff/pinion #5379x
2x Heavy duty carriers #3978
2x Diff gear set's #6882x
1x A-arms #3655x
2x Canards splitters #6433
2x Sets (8x) of brand new Proline road rage tires #9012-00
1x Set brand new Proline closed cell foam inserts #6115-02
1x Set (4x) Ofna Vspoke Chrome rims #86030
2x Sets (8x) Ofna Dual Spoke yellow rims #86035
a pack of large body clips all packed into a tool box that act's as a good work stand for the car.

This package has cost over $2500au, I will send it reg post anywhere (within reason) for $1650au. Paypal only, no splitting pack.