RC18T SELLOUT! Tons of parts, motors, escs, rollers, etc.
05-08-2012, 01:07 AM
#1
RC18T SELLOUT! Tons of parts, motors, escs, rollers, etc.
I have a TON of RC18T parts, a couple rollers, and several 18th scale brushless ESCs and motors. Everything I have was purchased over the last several weeks. I intended to build 3 hopped up RC18T trucks to drive with my nephews, but these are much more complicated than I thought so I'm scrapping the project and going a different route. Everything is either brand new or 'used' with only a few minutes of run time, with the exception of the rollers which were bought used. I did go through each one and replaced anything that needed replacing (linkages, diffs, etc), and added a few upgrades as well. Prices are for individual items and don't include shipping, I'm willing to cut a deal if you want multiple items. Ok here it goes:
ESCs:
1. HobbyWing EZRUN Brushless 25 Amp ESC (Version 2) - SOLD
2. HobbyWing EZRUN Brushless 25 Amp ESC (Version 2) - SOLD
3. HobbyWing EZRUN Brushless 18 Amp ESC (Version 2) - SOLD
4. Toro Micro Brushless 25 Amp ESC - $25
Motors:
1. Dynamite C4 8000kv - $25
2. Tacon 2030 5200kv - SOLD
3. Toro Micro 6100kv 4-Pole - SOLD
4. HobbyWing EZRUN 5200kv 18T - SOLD
5. HobbyWing EZRUN 7800kV 12T - SOLD
Wheels & Tires:
1. Pro-Pulse street tires & wheels - $10/set
2. Pro-Pulse dirt tires & wheels - $10/set
3. Pro-Pulse hybrid tires & wheels - $10/set
Rollers (complete rollers, just need electronics):
1. Aluminum front shocks, Factory Team heatsink, rear CVDs, RPM front bumper - $50
2. RPM front bumper, HR alum. rear bumper, Driven Productions 60T spur gear - $50
Parts:
1. The Toyz wide track kit, includes extended aluminum arms, CVDs and Titanium turnbuckles - $35
2. Exotek racing slipper clutch assembly - $25
3. GPM Aluminum steering saver assembly (3-pieces) - $10
4. GPM Delrin differential assembly (2 available) - $15
5. TowerPro MG90S metal gear servo - SOLD
6. Hitec HS-65HB carbonite gear servo - SOLD
7. EXI D213F metal gear servo - SOLD
8. The Toyz brushless motor heat sink and fan - $10
9. Driven Productions delrin 1/10 scale wheel adapters - SOLD
10. Driven Productions clear spur/pinion gear dust cover - SOLD
I also have an XP2 Transmitter with matching receiver and crystals for 20 bucks, as well as a few stock servo savers (21041), a few RC18T2 servo savers (21326), and HPI micro RS4 servo savers (73435). 3 bucks each for the savers.
Apparently I don't have enough posts to put links to pictures, PM me if you're interested and I can link you to my photobucket account.
ESCs:
1. HobbyWing EZRUN Brushless 25 Amp ESC (Version 2) - SOLD
2. HobbyWing EZRUN Brushless 25 Amp ESC (Version 2) - SOLD
3. HobbyWing EZRUN Brushless 18 Amp ESC (Version 2) - SOLD
4. Toro Micro Brushless 25 Amp ESC - $25
Motors:
1. Dynamite C4 8000kv - $25
2. Tacon 2030 5200kv - SOLD
3. Toro Micro 6100kv 4-Pole - SOLD
4. HobbyWing EZRUN 5200kv 18T - SOLD
5. HobbyWing EZRUN 7800kV 12T - SOLD
Wheels & Tires:
1. Pro-Pulse street tires & wheels - $10/set
2. Pro-Pulse dirt tires & wheels - $10/set
3. Pro-Pulse hybrid tires & wheels - $10/set
Rollers (complete rollers, just need electronics):
1. Aluminum front shocks, Factory Team heatsink, rear CVDs, RPM front bumper - $50
2. RPM front bumper, HR alum. rear bumper, Driven Productions 60T spur gear - $50
Parts:
1. The Toyz wide track kit, includes extended aluminum arms, CVDs and Titanium turnbuckles - $35
2. Exotek racing slipper clutch assembly - $25
3. GPM Aluminum steering saver assembly (3-pieces) - $10
4. GPM Delrin differential assembly (2 available) - $15
5. TowerPro MG90S metal gear servo - SOLD
6. Hitec HS-65HB carbonite gear servo - SOLD
7. EXI D213F metal gear servo - SOLD
8. The Toyz brushless motor heat sink and fan - $10
9. Driven Productions delrin 1/10 scale wheel adapters - SOLD
10. Driven Productions clear spur/pinion gear dust cover - SOLD
I also have an XP2 Transmitter with matching receiver and crystals for 20 bucks, as well as a few stock servo savers (21041), a few RC18T2 servo savers (21326), and HPI micro RS4 servo savers (73435). 3 bucks each for the savers.
Apparently I don't have enough posts to put links to pictures, PM me if you're interested and I can link you to my photobucket account.
Last edited by bflan2001; 05-12-2012 at 10:14 AM.
05-08-2012, 05:33 AM
#2
I'm interested in the rollers. PM sent.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
