ANZA LCG Slash. The most maxed out, well built, custom slash you'll EVER see. ALL NEW
#1
ANZA LCG Slash. The most maxed out, well built, custom slash you'll EVER see. ALL NEW
Ive decided I want a bigger truck... its insane, but I literally JUST finished this truck and now I'm going to sell it and loose my shirt. But Thats how it goes I guess.
Here is a list of the parts used to build it and what I paid for them:
ANZA Slash Build:
-ANZA Chassis $120
-ANZA Rear Carriers (Gunmetal) $30
-ANZA Castors (Gunmetal) $28
-ANZA Hinge pin set $14
-ANZA Front Axles $6
-ANZA Front Brace $6
-Proline Protrac Kit $50
-Proline Power Stroke Shocks (F/R) $85
-Proline Steering setup $30
-Proline Ford Raptor SVT Body $30
-Proline Gadiator SC Tires (on protrac wheels, not mounted or glued) $36
-Proline Street Fighter Tires (on protrac wheels) $36
-STRC Front Carriers (Gunmetal) $24
-STRC Front bulkhead (Gunmetal) $26
-STRC Motor plate (Gunmetal) $10
-STRC Aluminum Hexs (Gunmetal) $14
-STRC Top Shaft $11
-RPM Front bumper (Black) $12
-RPM Rear bumper and mount (Black) $22
-RPM Gear cover (Black) $7
-RPM Body mounts (front and rear) $24
-RPM Mud Flaps (black) $10
-FLM Sealed Diff $45
-Traxxas Transmission case $12
-Traxxas HD rod ends for protrac links $8
-Traxxas Slash 4X4 rear driveshafts $10
-Traxxas Slash waterproof RX box $11
-Associated Slipper and spur $10
-Spare spurs and slipper pads $15
-Dynamite RC Screw kit $17
Total $759
(note: non of these prices include any shipping I paid)
The truck has been run ONE time on a paved parking lot. It was rolled once so there are minor scratches on the roof... no cracks or anything bad at ALL. This truck is literally perfect.
As you can see from the list, I spared NO expense at all when building it. I used ALL the best parts, I spent all the $$ required to have it perfect. For anyone looking to have the absolute BEST Slash a racer could ever want... this is the one.
The pictures show the truck with electronics. I WILL sell it with the electronics and have listed prices as both a roller and ARTR (no radio is included).
Roller (both sets of wheels/tires, extra spurs and slipper pads): $550 shipped
Roller with electronics (MMP/4600, Savox 1258): $750 shipped
I realize this is probably the most expensive slash youve ever seen. But its also the most maxed out one youve ever seen also. You can't do better and if you wanted to build one yourself you can see how much more it will cost.
Pics:
These pics are from RIGHT after the build was completed. Ill get some current pics tonight. Looks pretty much identical. Just a tiny bit of dust and a scratch or two on the bumpers. 5 minutes in a parking lot type stuff. NO jumps at all... just drifting around corners.
Here is a list of the parts used to build it and what I paid for them:
ANZA Slash Build:
-ANZA Chassis $120
-ANZA Rear Carriers (Gunmetal) $30
-ANZA Castors (Gunmetal) $28
-ANZA Hinge pin set $14
-ANZA Front Axles $6
-ANZA Front Brace $6
-Proline Protrac Kit $50
-Proline Power Stroke Shocks (F/R) $85
-Proline Steering setup $30
-Proline Ford Raptor SVT Body $30
-Proline Gadiator SC Tires (on protrac wheels, not mounted or glued) $36
-Proline Street Fighter Tires (on protrac wheels) $36
-STRC Front Carriers (Gunmetal) $24
-STRC Front bulkhead (Gunmetal) $26
-STRC Motor plate (Gunmetal) $10
-STRC Aluminum Hexs (Gunmetal) $14
-STRC Top Shaft $11
-RPM Front bumper (Black) $12
-RPM Rear bumper and mount (Black) $22
-RPM Gear cover (Black) $7
-RPM Body mounts (front and rear) $24
-RPM Mud Flaps (black) $10
-FLM Sealed Diff $45
-Traxxas Transmission case $12
-Traxxas HD rod ends for protrac links $8
-Traxxas Slash 4X4 rear driveshafts $10
-Traxxas Slash waterproof RX box $11
-Associated Slipper and spur $10
-Spare spurs and slipper pads $15
-Dynamite RC Screw kit $17
Total $759
(note: non of these prices include any shipping I paid)
The truck has been run ONE time on a paved parking lot. It was rolled once so there are minor scratches on the roof... no cracks or anything bad at ALL. This truck is literally perfect.
As you can see from the list, I spared NO expense at all when building it. I used ALL the best parts, I spent all the $$ required to have it perfect. For anyone looking to have the absolute BEST Slash a racer could ever want... this is the one.
The pictures show the truck with electronics. I WILL sell it with the electronics and have listed prices as both a roller and ARTR (no radio is included).
Roller (both sets of wheels/tires, extra spurs and slipper pads): $550 shipped
Roller with electronics (MMP/4600, Savox 1258): $750 shipped
I realize this is probably the most expensive slash youve ever seen. But its also the most maxed out one youve ever seen also. You can't do better and if you wanted to build one yourself you can see how much more it will cost.
Pics:
These pics are from RIGHT after the build was completed. Ill get some current pics tonight. Looks pretty much identical. Just a tiny bit of dust and a scratch or two on the bumpers. 5 minutes in a parking lot type stuff. NO jumps at all... just drifting around corners.
#2
super nice truck. might be a tuff sell at that price though.
#6
Would you be interested in trading?
#11
,
What all would you consider on trades
#14
Chassis retails for $120 and the power strokes retail for between $80 and $100. I'd take $160 shipped for them and I'll throw in a spring kit for the front powerstrokes. This stuff was run once in a dusty paved parking lot with street tires. Never jumped or abused at all. Essentially new.
#15
Body and tires
YGPM