FLM savage part out
01-22-2012, 04:38 PM
#1
FLM savage part out
So I've had some interest, so I will be parting out the savy. Keep in mind, all prices include shipping to the con us and paypal fees. lowballers will be laughed at, and ignored. So anyways, heres what we have.....
Hitec 5955 servo, missing one tab. Has an aluminum servo arm. $ sold
Hitec 5645 servo. Has a plastic arm. $ sold
HPI SF50 servo. $25 shipped
Spektrum SR300T rx with wires for nitro or electric temps. $55 shipped
Spektrum SR300 rx $ SOLD
HPI 1200mah hump pack $ SOLD
Front and rear ends. Complete with shimmed BP diffs, HD outdrive cups, HD dogbones, and HD axles. Rpm arms, and integy HD carriers. Comes with wheelie bar and stock shock towers, not mounted.FLM steering drag link, and HPI HD servo saver spring, and steering bushings replaced with bearings. $ sold
FLM EXT LCG TVPS with center rear dog bone $ sold
FLM servo plate with mid tank setup, D8 clunk mtank and reciever box with on/off switch, fuel line and filter. $ SOLD.....
FLM motor plate $ sold
FLM skid plate $ SOLD
FLM shock towers with wing and mount $ SOLD
FLM servo mounts x4= 2 servos $ SOLD......
Modded Picco .28 with under 2 gallons, motorsaver filter, hpi vented clutch bell, dynamite max life aluminum shoes, mugen 1.0 springs and, motor mount $ sold
Dynamite 086 pipe $ sold
HPI aluminum big bore shocks, aluminum caps and spring retainers, and shock socks. Just noticed on shock leaks a little. $ sold
Three speed tranny with high speed third gear $ sold
T/B linkage $ SOLD......
Maximizer black beadlocks 1/2 offset with proline mulchers $ SOLD
May have missed a few things. If there is something that you are looking for and dont see, just ask.
Hitec 5955 servo, missing one tab. Has an aluminum servo arm. $ sold
Hitec 5645 servo. Has a plastic arm. $ sold
HPI SF50 servo. $25 shipped
Spektrum SR300T rx with wires for nitro or electric temps. $55 shipped
Spektrum SR300 rx $ SOLD
HPI 1200mah hump pack $ SOLD
Front and rear ends. Complete with shimmed BP diffs, HD outdrive cups, HD dogbones, and HD axles. Rpm arms, and integy HD carriers. Comes with wheelie bar and stock shock towers, not mounted.FLM steering drag link, and HPI HD servo saver spring, and steering bushings replaced with bearings. $ sold
FLM EXT LCG TVPS with center rear dog bone $ sold
FLM servo plate with mid tank setup, D8 clunk mtank and reciever box with on/off switch, fuel line and filter. $ SOLD.....
FLM motor plate $ sold
FLM skid plate $ SOLD
FLM shock towers with wing and mount $ SOLD
FLM servo mounts x4= 2 servos $ SOLD......
Modded Picco .28 with under 2 gallons, motorsaver filter, hpi vented clutch bell, dynamite max life aluminum shoes, mugen 1.0 springs and, motor mount $ sold
Dynamite 086 pipe $ sold
HPI aluminum big bore shocks, aluminum caps and spring retainers, and shock socks. Just noticed on shock leaks a little. $ sold
Three speed tranny with high speed third gear $ sold
T/B linkage $ SOLD......
Maximizer black beadlocks 1/2 offset with proline mulchers $ SOLD
May have missed a few things. If there is something that you are looking for and dont see, just ask.
Last edited by 6Triple6Six6; 02-03-2012 at 07:53 PM.
01-22-2012, 04:52 PM
#2
Do you have any better pictures of the shocks?
01-22-2012, 05:10 PM
#4
What else is needed if I want to buy the mid tank mod?
01-22-2012, 05:46 PM
#7
FLM servo plate with mid tank setup
PM sent about mid tank setup. Thx
01-22-2012, 07:12 PM
#10
Sending payment for mid tank setup and servo mounts tonight, thanks!
