FS: Losi Micro SCT Lot
#1
FS: Losi Micro SCT Lot
Hey folks. (The Arcade machine is not for sale! :P)
Wife said the micro's have to go, if I want to keep my new 1/8th scale buggy (because I don't drive these anymore), so, here they are. Here's my proof-its-real pics. You can see my eBay feedback under user WindDrake as well (140, 100% Positive!)
First up, the regular SCT.
The actual SCT is running the 8750 Excelorin Motor/Esc, nylon stock spur, and brass pinion gear. It also has the HR Motor Mount.
It's a little "Fuzzy" because I run it at work (concrete floor warehouse!). Great little car, diffs recently cleaned and regreased. Chassis was also recently replaced because the old one was just dinged up. Two bodies are included, one stock, one sporting BSH stickers. Both are worn, but perfectly workable. Add your own small RX, and go! The tires are bald, as you can see, but keep reading, there's more!
The second one is my custom truggy. This one is sporting rally wheels, urethane Super Swamper tires, an Atomic BB2 motor, brass pinion, and stock AM ESC/RX. As you can see, TWO RX's are included, both working great. The car is currently on Ch4, but the other RX has both Ch6 Crystals.
And for the rest.
Batteries: 2x Stock NiMH Cells, 3x 300mAh 2S LiPo Cells (Less then 10 cycles each). Also includes a Tamiya to Losi Mini cable I wired up, as well as 2 of the stock NiMh charging wall warts.
Servos: JR SM22 (No Mounting Tabs), 5-Wire Losi.
Motors: 2x Stock Micro SCT Motors
Plastics: Spare chassis bag minus lower chassis, new package of A-Arms, new package of SCT Wheels/Tires, used set of tires (~50% Tread) spare chassis nerf bars, misc servo horns (Including Losi Servo Saver for JR Servo), stock motor mounts, extra spurs and pinion gears.
Electronics: Nonworking stock radio/rx (for parts), Excelorin Programming Card
I don't want to think about what I have into all of this. It's a quick jumpstart into Micros, or an amazing gift to someone who loves Micro RC's.
I'm only looking for $200, plus S&H (or best offer). I'm also open to trades (or trades+cash), but I'm really only looking for sturdy 2wd/4wd 1:10th scale or larger rolling chassis'. If you need more pics, just ask! I'm also more then happy to answer any questions you might have about this stuff.
Wife said the micro's have to go, if I want to keep my new 1/8th scale buggy (because I don't drive these anymore), so, here they are. Here's my proof-its-real pics. You can see my eBay feedback under user WindDrake as well (140, 100% Positive!)
First up, the regular SCT.
The actual SCT is running the 8750 Excelorin Motor/Esc, nylon stock spur, and brass pinion gear. It also has the HR Motor Mount.
It's a little "Fuzzy" because I run it at work (concrete floor warehouse!). Great little car, diffs recently cleaned and regreased. Chassis was also recently replaced because the old one was just dinged up. Two bodies are included, one stock, one sporting BSH stickers. Both are worn, but perfectly workable. Add your own small RX, and go! The tires are bald, as you can see, but keep reading, there's more!
The second one is my custom truggy. This one is sporting rally wheels, urethane Super Swamper tires, an Atomic BB2 motor, brass pinion, and stock AM ESC/RX. As you can see, TWO RX's are included, both working great. The car is currently on Ch4, but the other RX has both Ch6 Crystals.
And for the rest.
Batteries: 2x Stock NiMH Cells, 3x 300mAh 2S LiPo Cells (Less then 10 cycles each). Also includes a Tamiya to Losi Mini cable I wired up, as well as 2 of the stock NiMh charging wall warts.
Servos: JR SM22 (No Mounting Tabs), 5-Wire Losi.
Motors: 2x Stock Micro SCT Motors
Plastics: Spare chassis bag minus lower chassis, new package of A-Arms, new package of SCT Wheels/Tires, used set of tires (~50% Tread) spare chassis nerf bars, misc servo horns (Including Losi Servo Saver for JR Servo), stock motor mounts, extra spurs and pinion gears.
Electronics: Nonworking stock radio/rx (for parts), Excelorin Programming Card
I don't want to think about what I have into all of this. It's a quick jumpstart into Micros, or an amazing gift to someone who loves Micro RC's.
I'm only looking for $200, plus S&H (or best offer). I'm also open to trades (or trades+cash), but I'm really only looking for sturdy 2wd/4wd 1:10th scale or larger rolling chassis'. If you need more pics, just ask! I'm also more then happy to answer any questions you might have about this stuff.
Last edited by WindDrake; 12-01-2011 at 07:31 PM.