FS/FT AE MGT Roller and Parts (for 6x6)
10-24-2011, 08:54 PM
#1
FS/FT AE MGT Roller and Parts (for 6x6)
Hi Everyone,
I am selling my AE MGT (originally 4.6). I bought this truck as a roller (if you can call it that, it didn't even have wheels). It was going to be my long term project. I was wanting to make it into a 6x6 with dual 1717 motors in it, but I just don't have the time and I lost the interest in it. So I want to sell it to clean up my room and my lost will be your gain if you buy this.
Extra Parts:
6 sets of black RPM Arms (for 6 wheels)
2 Chassis (stock) (I was going to chop one up and weld it onto other to make a 6wd chassis)
2 Pro-line MOAB Tires with Pro-line Commando Beadlock Wheels (4 are already on the truck, so that make 6 wheels)
New Front and Rear Bumpers (ones on the truck are pretty beat up)
RX and Servo mount
2 Sets of Pro-line 23mm Wheel Hexes
2 Rear Skid Plates (I was planning on using them for inner rear bulkhead / differential)
1 Set of Bearings
4 CVD Shafts
1 Set of Axle Carriers
2 Sets of Rods/ Turn Buckles
1 Bulkhead with Differential
1 Bulkhead Case
4 New Stock Shocks (8 new shocks are already on the truck, these extra stocks were for the 6wd)
8 Old stock Shocks (these were leaking, etc)
1 Rear Shock Tower (for the 6wd)
1 Set of Pivot Balls (for 6wd)
1 Set of Hinge Pins (for 6wd)
1 Set of Axles (for 6wd)
1 Set of Shock Hardware
1 Differential Pinion Gear (for the inner rear differential to make it dual output)
2 Output Cups (one in package, one opened but never used)
Transmissions:
I couldn't decide which tranny to use, so I bought two different set ups. I will let you choose one. If you want both we have to come up with a price.
E-Revo / E-maxx Tranny (extra motor plate to double up so it will be beefier for dual 1717s)
Or
E-Savage with a Plate
I have asked quite a few people for their opinion on a fair price. The most common price was $250 shipped. I will go with that or a best offer. I will consider any reasonable best offer. I am not really wanting to do a trade, but I will consider anything. The worse thing I can say is "No".
I don't have any feedback on this site, but if you private me I will provide you with my usernames for eBay and to the site that I usually hang out at. Both have 100% positive feedback.
At the moment, I am not willing to split this lot up.
I am selling my AE MGT (originally 4.6). I bought this truck as a roller (if you can call it that, it didn't even have wheels). It was going to be my long term project. I was wanting to make it into a 6x6 with dual 1717 motors in it, but I just don't have the time and I lost the interest in it. So I want to sell it to clean up my room and my lost will be your gain if you buy this.
Extra Parts:
6 sets of black RPM Arms (for 6 wheels)
2 Chassis (stock) (I was going to chop one up and weld it onto other to make a 6wd chassis)
2 Pro-line MOAB Tires with Pro-line Commando Beadlock Wheels (4 are already on the truck, so that make 6 wheels)
New Front and Rear Bumpers (ones on the truck are pretty beat up)
RX and Servo mount
2 Sets of Pro-line 23mm Wheel Hexes
2 Rear Skid Plates (I was planning on using them for inner rear bulkhead / differential)
1 Set of Bearings
4 CVD Shafts
1 Set of Axle Carriers
2 Sets of Rods/ Turn Buckles
1 Bulkhead with Differential
1 Bulkhead Case
4 New Stock Shocks (8 new shocks are already on the truck, these extra stocks were for the 6wd)
8 Old stock Shocks (these were leaking, etc)
1 Rear Shock Tower (for the 6wd)
1 Set of Pivot Balls (for 6wd)
1 Set of Hinge Pins (for 6wd)
1 Set of Axles (for 6wd)
1 Set of Shock Hardware
1 Differential Pinion Gear (for the inner rear differential to make it dual output)
2 Output Cups (one in package, one opened but never used)
Transmissions:
I couldn't decide which tranny to use, so I bought two different set ups. I will let you choose one. If you want both we have to come up with a price.
E-Revo / E-maxx Tranny (extra motor plate to double up so it will be beefier for dual 1717s)
Or
E-Savage with a Plate
I have asked quite a few people for their opinion on a fair price. The most common price was $250 shipped. I will go with that or a best offer. I will consider any reasonable best offer. I am not really wanting to do a trade, but I will consider anything. The worse thing I can say is "No".
I don't have any feedback on this site, but if you private me I will provide you with my usernames for eBay and to the site that I usually hang out at. Both have 100% positive feedback.
At the moment, I am not willing to split this lot up.
10-24-2011, 08:56 PM
#2
Some more pictures.
10-25-2011, 10:07 AM
#3
Still available.
10-26-2011, 11:02 AM
#4
Bumpy bump
10-28-2011, 07:40 AM
#5
bump
bump for a good guy
10-30-2011, 06:22 PM
#6
bump
11-01-2011, 11:00 AM
#7
bump
bump this woud be a sick e mgt
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
