FS Losi Mini Late Model Almost Ready to Run/Roller
10-12-2011, 03:57 PM
#1
FS Losi Mini Late Model Almost Ready to Run/Roller
Hello,
I am hoping to sell me Losi Mini late model.
My LHS moved and then turned to the off-road racing scene.
I was in the process of making my late model into a SC or Stadium truck for this track. Funds ran low and i have an rc18t2. I dont need two cars of the same class.
Right now it is in a "lifted off road" form. I made some extensions of the rear shock tower out of aluminum that allows the rear suspension to be lifted. They have a few different mounting positions. The front i just changed the position of the camber links and shortend them (they are threaded). This give it more ride height suitable for off road. To change it to stock ride height you move the front camber links back to the inside holes and lengthen them to get a reasonable camber angle. The rear just take out the extensions.
I also did a mid-motor mod that is currently set-up.If you want to go back to rear motor= All you have to do is get a new transmission box and swap the gears into it as well rotate the suspension arms and shocks to the other side. As well as removing the the custom rear bumper mount.(the mid motor tranny has holes that needed to be drilled to get it to turn around)
mods:
-Titanium Turn buckles
-Exotek LM Pro Chassis (Carbon fiber)
-DP Steering drag link
-Aluminum Dual Disk slipper clutch
-MIP CVDS
-Aluminum Threaded Shocks
-BAll differential (Rebuilt recently)
-HS85mg servo
-Aluminum REar Hub carrier (Only one. a bearing seized in the other and i was forced to use plastic)
-A RPM Mini T Front bumper (used for off road configuration)
-McAllister Impala Body (for On road configuration)
-TheToyz Silver 1/18th motor Heatsink
-Front Ribbed Tires (NIP)
-Custom Right side Nerf Bar (The exotek chassis does not have one)
All stock parts will be included as well as the manual and instructions that were kept along the way (Ball differential and Exotek Chassis install)
The only part that has ever broken a rear hub carrier, hence the aluminum ones.
The stock body can be included is wanted (it has some scratches and cracks.)
All that is needed to complete is a motor, ESC, Battery,RX and TX, and rear tires.
Asking $90 shipped
I can Included the Stock 2.4ghz rx, and Tx
Asking $115 shipped OBO
If you want additional pictures or information please contact me through a pm
Thanks,
cptobviouss
I am hoping to sell me Losi Mini late model.
My LHS moved and then turned to the off-road racing scene.
I was in the process of making my late model into a SC or Stadium truck for this track. Funds ran low and i have an rc18t2. I dont need two cars of the same class.
Right now it is in a "lifted off road" form. I made some extensions of the rear shock tower out of aluminum that allows the rear suspension to be lifted. They have a few different mounting positions. The front i just changed the position of the camber links and shortend them (they are threaded). This give it more ride height suitable for off road. To change it to stock ride height you move the front camber links back to the inside holes and lengthen them to get a reasonable camber angle. The rear just take out the extensions.
I also did a mid-motor mod that is currently set-up.If you want to go back to rear motor= All you have to do is get a new transmission box and swap the gears into it as well rotate the suspension arms and shocks to the other side. As well as removing the the custom rear bumper mount.(the mid motor tranny has holes that needed to be drilled to get it to turn around)
mods:
-Titanium Turn buckles
-Exotek LM Pro Chassis (Carbon fiber)
-DP Steering drag link
-Aluminum Dual Disk slipper clutch
-MIP CVDS
-Aluminum Threaded Shocks
-BAll differential (Rebuilt recently)
-HS85mg servo
-Aluminum REar Hub carrier (Only one. a bearing seized in the other and i was forced to use plastic)
-A RPM Mini T Front bumper (used for off road configuration)
-McAllister Impala Body (for On road configuration)
-TheToyz Silver 1/18th motor Heatsink
-Front Ribbed Tires (NIP)
-Custom Right side Nerf Bar (The exotek chassis does not have one)
All stock parts will be included as well as the manual and instructions that were kept along the way (Ball differential and Exotek Chassis install)
The only part that has ever broken a rear hub carrier, hence the aluminum ones.
The stock body can be included is wanted (it has some scratches and cracks.)
All that is needed to complete is a motor, ESC, Battery,RX and TX, and rear tires.
Asking $90 shipped
I can Included the Stock 2.4ghz rx, and Tx
Asking $115 shipped OBO
If you want additional pictures or information please contact me through a pm
Thanks,
cptobviouss
10-13-2011, 03:27 PM
#2
Bump
Make some offers. The price is not final!
Would like to have this gone for a bigger project
Make some offers. The price is not final!
Would like to have this gone for a bigger project
10-23-2011, 05:39 PM
#3
Bump
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
