FS: Ofna Hyper 10TT roller
#1
FS: Ofna Hyper 10TT roller
Used Hyper 10TT Electric 1/10 Truggy Roller.
When I ran this, I ran with a 550 4.5T Novak Ballistic Motor and Mamba Max Pro and it was a blast to drive.
I laid the battery tray on its side and moved it forwards (no extra holes drilled in chassis). This lowers the C of G and jumps better. Also by moving the battery try forward you can put your ESC behind it, again lowering the Center of Gravity.
The originally did a Nitro conversion on this truck during the summer for fun, but had no interest when I tried to sell it, so put all the Electric stuff back in - hence the holes in the body (new bodies are only about $20). Comes with some extra Decals and setup info.
Never bashed, just raced a few times on a very tame track.
MANY UPGRADES INCLUDE
Comes with the essential upgrade and features :
-STRC Top plate ($17 value)
-Front CVD's ($35 value)
-Bellcrank Bearings (replacing bushings)
-DE Racind skid plate
-Mini-ST Wing (Spare included, shown)
-STRC Rear Hubs ($31 value)
-STRC SCRT10 Bellcrank ($35 value) (does not include top portion of arm. Substituted with plastic part as it bound up too much, causing the servo gears to strip. Its the lower portion of the Servo saver that was weak, and the STRC Alum part prevents this breakage).
-Aluminum Wheel hexes on all 4 axles.
-PRO-LINE Caliber M3 truck tires with Pro-line closed cell inserts mounted on OFNA 10TT wheels, 95% tread left.
NO SERVOS, RECEIVER, TRANSPONDER INCLUDED.
$SOLD shipped in the USA.
When I ran this, I ran with a 550 4.5T Novak Ballistic Motor and Mamba Max Pro and it was a blast to drive.
I laid the battery tray on its side and moved it forwards (no extra holes drilled in chassis). This lowers the C of G and jumps better. Also by moving the battery try forward you can put your ESC behind it, again lowering the Center of Gravity.
The originally did a Nitro conversion on this truck during the summer for fun, but had no interest when I tried to sell it, so put all the Electric stuff back in - hence the holes in the body (new bodies are only about $20). Comes with some extra Decals and setup info.
Never bashed, just raced a few times on a very tame track.
MANY UPGRADES INCLUDE
Comes with the essential upgrade and features :
-STRC Top plate ($17 value)
-Front CVD's ($35 value)
-Bellcrank Bearings (replacing bushings)
-DE Racind skid plate
-Mini-ST Wing (Spare included, shown)
-STRC Rear Hubs ($31 value)
-STRC SCRT10 Bellcrank ($35 value) (does not include top portion of arm. Substituted with plastic part as it bound up too much, causing the servo gears to strip. Its the lower portion of the Servo saver that was weak, and the STRC Alum part prevents this breakage).
-Aluminum Wheel hexes on all 4 axles.
-PRO-LINE Caliber M3 truck tires with Pro-line closed cell inserts mounted on OFNA 10TT wheels, 95% tread left.
NO SERVOS, RECEIVER, TRANSPONDER INCLUDED.
$SOLD shipped in the USA.
Last edited by tobamiester; 10-14-2011 at 02:16 PM. Reason: price drop