Mugen MBX6-T, Ninja JX, Ninja Pipe & Manifold, MT-4 Radio. Hitech Servos
#1
Mugen MBX6-T, Ninja JX, Ninja Pipe & Manifold, MT-4 Radio. Hitech Servos
I have a fully assembled Mugen MBX6T. I am thinking of selling it, if the price is right. I am just going to do a Brief summary but not into to much detail. I take very good care of my possessions. The engine was properly broken in using a heat gun the first 8 tanks to warm the engine before starting. Then I also kept it around 200 degree first 8 tanks to let the engine break in properly. I also used after run oil every time I ever turned on the engine. I have never raced this or anything close. This is a complete package that is fully loaded with the best components.
I will put pictures up later if people are interested.
-Mugen MBX6T-fully assembled
-Ninja JX .21 BO1A - Less than 1/2 gallon through it
-Ninja Efra 2024 Pipe & Manifold
-Digital Hitec HS-7955TG {249.96 oz-in (18 kg-cm) at 4.8V
{333.29 oz-in (24.0kg-cm) at 6.0V
-Digital Savox 1258TG {@4.8v - 9.6kg./133.3oz-in
{@6.0v - 12.0kg/166.6oz-in
-Venom 1600 5 Cell 6V 1600mAh NiMH Flat Receiver Battery
-AKA City Grid Iron - 80%-85%
-Ofna Truggy Starter Box with Control Panel - No Battery
***Also want to sell my almost brand new Airtronics MT-4 Controller
Everything together is over $1600. Give me a reasonable offer based on the condition and that This is one of the best Truggys.
I have all the boxes for the Controller, Roller, Engine, and Pipe.
You can email me at [email protected] or text/call at 818-851-8516
I will put pictures up later if people are interested.
-Mugen MBX6T-fully assembled
-Ninja JX .21 BO1A - Less than 1/2 gallon through it
-Ninja Efra 2024 Pipe & Manifold
-Digital Hitec HS-7955TG {249.96 oz-in (18 kg-cm) at 4.8V
{333.29 oz-in (24.0kg-cm) at 6.0V
-Digital Savox 1258TG {@4.8v - 9.6kg./133.3oz-in
{@6.0v - 12.0kg/166.6oz-in
-Venom 1600 5 Cell 6V 1600mAh NiMH Flat Receiver Battery
-AKA City Grid Iron - 80%-85%
-Ofna Truggy Starter Box with Control Panel - No Battery
***Also want to sell my almost brand new Airtronics MT-4 Controller
Everything together is over $1600. Give me a reasonable offer based on the condition and that This is one of the best Truggys.
I have all the boxes for the Controller, Roller, Engine, and Pipe.
You can email me at [email protected] or text/call at 818-851-8516
Last edited by MugenSeikiPro; 08-10-2011 at 12:48 PM.
#2
Great Deal!
#3
$1000 for everything.
#4
Bump