WTT / WTS E-Maxx Roller
06-28-2011, 01:06 PM
#1
WTT / WTS E-Maxx Roller
I have a E-Maxx roller I just received from a trade and it wasn't what my son really wanted.
Looking for $180 shipped within the CONUS.
The E-Maxx is an amazing roller...
1. CVDs all around
2. Complete 2-Speed Transmission w/ Reverse
3. RPM A-Arms - Front & Rear
4. RPM 3-Piece Skid Plate Set
5. RPM Front & Rear Shock Towers w/ Body Posts
6. Upgraded Shock Springs (4)
7. Unused / Unpainted Truck Body
8. 17mm Aluminum Hexes
** To acceleration and sweeten deal, I have a set of 14V Titan Monster 550s Motors to include. Looking for the pinions, will include when found.
Visible Issues:
1. Wheels - 1 stripped hex mount hole; another mount in rough shape, but not stripped.
2. A tire has a hole fix
** These are used basher wheels & tires
3. Shocks will need to be replaced / rebuilt in the future, but if using it as a basher than run it until they go.
* These are the known / visible issues. No other issues have been noted. Being sold as is. Please ask questions and I'll do my best to answer, but please remember I just received this truck as part of a trade and I probably don't have all the answers.
Have some spare parts. Not going to send the bag of screws, looked them over quickly and they're trash...
If interested in trading...
1. Looking for Truggy Roller or better.
2. Upgrades for Revo, E-Revo, MERV, and Slash
3. Complete Engine(s) - for MutantMaxx and Exteme Basher Maxx
4. Electronics - Receivers (Spektrum DX3.0 and Airtronics MX-3FHSS), 2.4GHz Tx & Rx, Servos, ESC, and Motors
5. GorillaMaxx Parts - like a single speed transmission
6. MutantMaxx parts
7. Batteries & Chargers
8. Tools 'n' Stuff
** Let me know what you have to offer...
** Ask!!! Make an $$$ offer $$$ and/or
trade ...
*** Worst case I say "No Thank You".
Looking for $180 shipped within the CONUS.
The E-Maxx is an amazing roller...
1. CVDs all around
2. Complete 2-Speed Transmission w/ Reverse
3. RPM A-Arms - Front & Rear
4. RPM 3-Piece Skid Plate Set
5. RPM Front & Rear Shock Towers w/ Body Posts
6. Upgraded Shock Springs (4)
7. Unused / Unpainted Truck Body
8. 17mm Aluminum Hexes
** To acceleration and sweeten deal, I have a set of 14V Titan Monster 550s Motors to include. Looking for the pinions, will include when found.
Visible Issues:
1. Wheels - 1 stripped hex mount hole; another mount in rough shape, but not stripped.
2. A tire has a hole fix
** These are used basher wheels & tires
3. Shocks will need to be replaced / rebuilt in the future, but if using it as a basher than run it until they go.
* These are the known / visible issues. No other issues have been noted. Being sold as is. Please ask questions and I'll do my best to answer, but please remember I just received this truck as part of a trade and I probably don't have all the answers.
Have some spare parts. Not going to send the bag of screws, looked them over quickly and they're trash...
If interested in trading...
1. Looking for Truggy Roller or better.
2. Upgrades for Revo, E-Revo, MERV, and Slash
3. Complete Engine(s) - for MutantMaxx and Exteme Basher Maxx
4. Electronics - Receivers (Spektrum DX3.0 and Airtronics MX-3FHSS), 2.4GHz Tx & Rx, Servos, ESC, and Motors
5. GorillaMaxx Parts - like a single speed transmission
6. MutantMaxx parts
7. Batteries & Chargers
8. Tools 'n' Stuff
** Let me know what you have to offer...
** Ask!!! Make an $$$ offer $$$ and/or
trade ...*** Worst case I say "No Thank You".
06-29-2011, 11:19 AM
#2
BUMP
STILL LOOKING FOR A NEW HOME!
07-08-2011, 10:34 AM
#3
free bump
i have seen this truck and it is really srtong, good deal for whoever is buying it.
07-08-2011, 12:04 PM
#4
Reply...
What do you think of your E-Maxx? She cleaned up nice! Dyed the gray parts black and replaced most of the bad parts. How is the T-Maxx?
Also the E-Maxx has moved to a new garage! I got a basket case of rustlers... Atleast one whole rig and maybe another??? Another good cause.
Thanks...
07-08-2011, 02:55 PM
#5
T-Maxx is fine i am getting fed up with the ez start so i might use a pull start. did u get my REVO PM?
07-13-2011, 04:13 PM
#7
TRADED
SORRY ALREADY TRADED FOR 2 RUSTLERS AND A BOX OF STUFF! AND WAS HELPING A KID OUT IN THE PROCESS... "BONUS"
NO THANK YOU ON THE PRO-PULSE BUGGY, I JUST GOT RID OF MY PRO-PULSE TRUGGY W/ ABOUT $300 IN PARTS. GIVE ME A PRICE AND I'LL CHECK WITH THE GUY THAT TOOK MINE AND SEE IF HE WOULD BE INTERESTED. FOR SOME REASON THESE RIGS ARE HARD SELLS, EVEN THOUGH THEY'RE SIMILAR / COMPATIBLE WITH THE RC18.
NO THANK YOU ON THE PRO-PULSE BUGGY, I JUST GOT RID OF MY PRO-PULSE TRUGGY W/ ABOUT $300 IN PARTS. GIVE ME A PRICE AND I'LL CHECK WITH THE GUY THAT TOOK MINE AND SEE IF HE WOULD BE INTERESTED. FOR SOME REASON THESE RIGS ARE HARD SELLS, EVEN THOUGH THEY'RE SIMILAR / COMPATIBLE WITH THE RC18.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
