Crawler Shed's Speed Demon for SALE
#1
Crawler Shed's Speed Demon for SALE
thanks for looking at my ad. this thing started as a Stock EMaxx, well i took her apart and this is what i came up with.
first a new chassis WB is now 18.5 (i think real close to that) the 5700 was just there to see where i was gonna put stuff
then i tore the rear diff aparts and installed a Spool for killer traction.
wheels HMMMMMMMMMM Proline 40s Beadlocks wrapped with Proline Big Joes and a lil paint of the chassis oh chassis was cut out of T6061 Aircraft Alumin plate. lower supporst are cut out of 1/4" thick alumin
sitting next to one of my other maxx rigs
next i added Ingtey piggyback shocks. FULLY CDVed, 3.3 Tmaxx Drive shafts(if not the stock one will get shredded)
then to the Electronics,
Kershaw design BL 150 amp ESC w a Loe 2360KV BL motor (huge torque hard to keep front wheels on the ground)
bought a REDCAT RACING 1/5 Lexan( Very Heavy Lexan it can take the Abuse)
Beer can for size Ref
radio is a 2.4 2 channel AX-2 with match servo for steering. had to install a wheel bar to keep her from doin back flips.
heres a vid of the second run(sorry wife i ran into you )
http://youtu.be/pLnJj0jeEBo
looking to get 450 as a roller
RTR Minus 3s lipo 575
or hit me up with trades, i am pretty flexable......
first a new chassis WB is now 18.5 (i think real close to that) the 5700 was just there to see where i was gonna put stuff
then i tore the rear diff aparts and installed a Spool for killer traction.
wheels HMMMMMMMMMM Proline 40s Beadlocks wrapped with Proline Big Joes and a lil paint of the chassis oh chassis was cut out of T6061 Aircraft Alumin plate. lower supporst are cut out of 1/4" thick alumin
sitting next to one of my other maxx rigs
next i added Ingtey piggyback shocks. FULLY CDVed, 3.3 Tmaxx Drive shafts(if not the stock one will get shredded)
then to the Electronics,
Kershaw design BL 150 amp ESC w a Loe 2360KV BL motor (huge torque hard to keep front wheels on the ground)
bought a REDCAT RACING 1/5 Lexan( Very Heavy Lexan it can take the Abuse)
Beer can for size Ref
radio is a 2.4 2 channel AX-2 with match servo for steering. had to install a wheel bar to keep her from doin back flips.
heres a vid of the second run(sorry wife i ran into you )
http://youtu.be/pLnJj0jeEBo
looking to get 450 as a roller
RTR Minus 3s lipo 575
or hit me up with trades, i am pretty flexable......