XRAY 808 2010 SPEC PARTS/SPARE CAR
05-03-2011, 11:13 PM
#1
XRAY 808 2010 SPEC PARTS/SPARE CAR
I have a 2010 spec car that I took off the shelf to rebuild and race this year but I dont think I have the energy to do it. Im in the process of cleaning it up and going through it to get it in shape but it needs a few things.
It needs bearings for the center diff, a new center diff case( I have no clue why but a rock mustve gotten inside and it grinded down a bit of the case but it is still usable), bearings for the diff housing (bulk heads) front and rear. The front and rear diff case bearings are still good. I am putting in brand new bearings on all 4 corners of the arms for the axles. All the drive shafts are good, thanks to that HUDY steel! Needs a new body and shock boots. Bladders and o-rings in shocks still good. I will include a whole new pack of diff o-rings. Im am rebuilding the front and rear diffs and the new o-rings will be installed. Comes with graphite brake disks as well as DE mud guards NIP.
Will come with a full set of aka cityblock tires with plenty of life left on them and 2 proline caliber tires with some life left as well. This buggy has seen only 1 race day and about 2-3 practice days. Break-in was done on pavement so it saw no dirt then. Pretty low run time and XRAY makes quality stuff so if you want it for parts or as a spare car it will do fine. I will finish cleaning up the front and rear ends and put in new diff oil but you will have to finish it up when you get the bulk head bearings as the ones that were in there were pretty gritty and in my book that means trash. Id rather run a car with newer bearings than deal with bearings that may fail.
I will also include as a bonus a futaba s9452 fast digital servo and a s3305 servo (high torque not as fast). Has a high down force wing. And thats about it. This car will run fine nothing to hide here my feedback is good on here and on ebay under "big_tonys_rc". Figured Id list it here before I toss it on ebay. I will try to add pics but the car is being cleaned up right now so that may have to wait.
Asking 300 firm shipped to lower 48.
It needs bearings for the center diff, a new center diff case( I have no clue why but a rock mustve gotten inside and it grinded down a bit of the case but it is still usable), bearings for the diff housing (bulk heads) front and rear. The front and rear diff case bearings are still good. I am putting in brand new bearings on all 4 corners of the arms for the axles. All the drive shafts are good, thanks to that HUDY steel! Needs a new body and shock boots. Bladders and o-rings in shocks still good. I will include a whole new pack of diff o-rings. Im am rebuilding the front and rear diffs and the new o-rings will be installed. Comes with graphite brake disks as well as DE mud guards NIP.
Will come with a full set of aka cityblock tires with plenty of life left on them and 2 proline caliber tires with some life left as well. This buggy has seen only 1 race day and about 2-3 practice days. Break-in was done on pavement so it saw no dirt then. Pretty low run time and XRAY makes quality stuff so if you want it for parts or as a spare car it will do fine. I will finish cleaning up the front and rear ends and put in new diff oil but you will have to finish it up when you get the bulk head bearings as the ones that were in there were pretty gritty and in my book that means trash. Id rather run a car with newer bearings than deal with bearings that may fail.
I will also include as a bonus a futaba s9452 fast digital servo and a s3305 servo (high torque not as fast). Has a high down force wing. And thats about it. This car will run fine nothing to hide here my feedback is good on here and on ebay under "big_tonys_rc". Figured Id list it here before I toss it on ebay. I will try to add pics but the car is being cleaned up right now so that may have to wait.
Asking 300 firm shipped to lower 48.
