Tekno RC V3 Brushless Kit for Losi 8B 2.0 90.00 shipped
04-26-2011, 04:12 PM
#1
Tekno RC V3 Brushless Kit for Losi 8B 2.0 75.00 shipped
selling my tekno conversion for losi 2.0 i ran a tekin rx8 75.00 shipped if it has 10 runs on it id be shocked
Not just another 'conversion', the Tekno RC V3 Brushless Kit is a total electric transformation! Featuring the first commercially available 1/8th scale electric specific chassis along with Tekno RC's innovative patent pending Elektri-Clutch system. This is the kit everyone has been waiting for:
Factory Finish - hard anodized chassis, black anodized and injection molded components
Lowest CG of any conversion, provides better handling and higher capacity batteries
4mm 7075-T6 CNC hard anodized chassis - only the best, no stamping here
No extra holes, no drilling, no mods - designed for electric racing by electric racers
Patent pending Elektri-Clutch system to tune the power delivery of the hottest brushless motors. Our hardened steel clutchbells will last and last because the motor is disengaged from the drivetrain off power. For those that prefer direct drive, our kits are compatible with long shank 5mm bore mod1 pinions as well. More options and flexibility than any other kit on the market.
Patent pending 1-piece motor mount/heatsink fully supports your motor and provides superior cooling under the most rigorous conditions. Need more cooling? Slap a 40mm fan on the integrated fan mount
Mechanical brake option with front/rear brake bias provides world class handling while lowering operating temps and easing the stress on your motor, ESC, and drivetrain
Optimized left-to-right and front-to-rear weight balance - battery is as close to center as possible for the best handling of any electric 1/8th scale on the market
Included radio tray keeps the wires neat and features an integrated transponder mount
Low CG battery tray (165x52mm) is countersunk into the chassis -1.5mm and keeps the battery protected while allowing the most height clearance of any setup on the market
Proven tough Tekno RC battery strap system WILL protect your batteries and will NOT break from hard landings
Servo mounts feature integrated cable guides to keep your servo wires neat and away from hazardous moving parts
Includes full Tekno RC 1/8th Elektri-Clutch setup - adapter, clutch shoes, .8mm clutch springs, 14t 1/8th clutch bell and bearings, an unbeatable value
Custom chassis mud guards keep the dirt away and finish off the factory quality kit
Tekno RC - No compromises!
Note: 3 Channel radio with channel mixing may be required for use with mechanical brakes depending on your setup. M11, DX3R, DX3.0, Futaba 3PK, 4PK, etc.
Not just another 'conversion', the Tekno RC V3 Brushless Kit is a total electric transformation! Featuring the first commercially available 1/8th scale electric specific chassis along with Tekno RC's innovative patent pending Elektri-Clutch system. This is the kit everyone has been waiting for:
Factory Finish - hard anodized chassis, black anodized and injection molded components
Lowest CG of any conversion, provides better handling and higher capacity batteries
4mm 7075-T6 CNC hard anodized chassis - only the best, no stamping here
No extra holes, no drilling, no mods - designed for electric racing by electric racers
Patent pending Elektri-Clutch system to tune the power delivery of the hottest brushless motors. Our hardened steel clutchbells will last and last because the motor is disengaged from the drivetrain off power. For those that prefer direct drive, our kits are compatible with long shank 5mm bore mod1 pinions as well. More options and flexibility than any other kit on the market.
Patent pending 1-piece motor mount/heatsink fully supports your motor and provides superior cooling under the most rigorous conditions. Need more cooling? Slap a 40mm fan on the integrated fan mount
Mechanical brake option with front/rear brake bias provides world class handling while lowering operating temps and easing the stress on your motor, ESC, and drivetrain
Optimized left-to-right and front-to-rear weight balance - battery is as close to center as possible for the best handling of any electric 1/8th scale on the market
Included radio tray keeps the wires neat and features an integrated transponder mount
Low CG battery tray (165x52mm) is countersunk into the chassis -1.5mm and keeps the battery protected while allowing the most height clearance of any setup on the market
Proven tough Tekno RC battery strap system WILL protect your batteries and will NOT break from hard landings
Servo mounts feature integrated cable guides to keep your servo wires neat and away from hazardous moving parts
Includes full Tekno RC 1/8th Elektri-Clutch setup - adapter, clutch shoes, .8mm clutch springs, 14t 1/8th clutch bell and bearings, an unbeatable value
Custom chassis mud guards keep the dirt away and finish off the factory quality kit
Tekno RC - No compromises!
Note: 3 Channel radio with channel mixing may be required for use with mechanical brakes depending on your setup. M11, DX3R, DX3.0, Futaba 3PK, 4PK, etc.
Last edited by milkman48; 05-01-2011 at 08:31 AM.
04-27-2011, 08:36 PM
#2
to the top
05-01-2011, 08:32 AM
#3
price drop last thing to sell 75.00 shipped
MAKE OFFER
MAKE OFFER
05-01-2011, 08:47 AM
#4
Wicked deal
free bump for a wicked deal. the electri-clutch kit alone costs $50. Tekno kits are rock solid and really make your conversion look professional!
05-16-2011, 08:06 AM
#5
i still have this set up
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
