2wd Slash Roller with Medusa Motor F/S
#1
2wd Slash Roller with Medusa Motor F/S
SOLD!!!!!
Up for sale is my 2wd slash. It rarely gets driven anymore and is used as a backup truck if I break all my other ones. It will come as a roller plus a Medusa 3300kv 4 pole motor. This is an excellent motor and has more than enough power for this truck. It technically can be ran in a 4wd slash with no problems. Everything works on it and the shocks have just been rebuilt with 45wt in the front and 40wt in the rear. You will need a tx/rx and esc to make it RTR. Here is a list of what has been done to it:
-Traxxas Aluminum Big Bore Shocks with Losi Green Springs
-Lunsford Titanium Hinge Pins all throughout
-RPM Front/Rear Arms
-RPM Front/Rear Shock Towers
-RPM Front Bearing Carrier
-Traxxas Aluminum Front Castor Block (red)
-Traxxas Aluminum Rear Carrier (red)
-Traxxas Aluminum Rods Front/Rear (red)
-Traxxas Aluminum Steering Rack (red) (center drag link is still plastic stock)
-Aluminum Front Cross Brace
-Revo 3.3 Motor Guard (for rollover protection)
-Slash 4x4 Wheels w/90% Tread left
-Slash 4x4 Body in great shape with extra protection on the underside
-Traxxas 2075 Digital Servo
-2 Battery Straps for easier mounting
-Shaved inside of battery tray to fit Turnigy lipos. Does not affect chassis strength
-4 little set screws drilled through shock tower mounts to hold the screws in better. They tend to come out after awhile
-FLM Rear Axles w/drive cups (If they ever break they will replace them at little to no cost, which I doubt will break)
-Custom cut 2mm aluminum piece for mounting after market ESC (easy to remove for stock ESC mounting)
-Brand New Extra Chassis
-Brand New Extra Front Bumper
-Used Rear Bumper and Battery Hold Down Brace
-Medusa 3300kv 4 Pole Motor (rear end cap has been drilled for 2 little screws to better secure it. They had a tendany to come off. Also added a piece a black velcro to cover the holes from dirt)
Specs:
Kv-3300RPM/V
[email protected]
Rm-0.007
P In*-700W
I-75A
Max I* *-90A
Max V-18V
Dimensions-36 x 50mm
Shaft Dia-3.17mm
Weight-230g
Link to Medusa motor site
http://www.medusaproducts.com/motors/036-V2.htm
I think that is it for now unless I can think of anything else. It has the normal bottom scratches but runs good and is a blast. It also has 32 pitch or mod 8 gearing. Gearing is 13/54. I want $155 to the lower 48 and ships through USPS with paypal only.
For faster response email/call/text @ [email protected] 619-916-1286
Thanks for looking.
Up for sale is my 2wd slash. It rarely gets driven anymore and is used as a backup truck if I break all my other ones. It will come as a roller plus a Medusa 3300kv 4 pole motor. This is an excellent motor and has more than enough power for this truck. It technically can be ran in a 4wd slash with no problems. Everything works on it and the shocks have just been rebuilt with 45wt in the front and 40wt in the rear. You will need a tx/rx and esc to make it RTR. Here is a list of what has been done to it:
-Traxxas Aluminum Big Bore Shocks with Losi Green Springs
-Lunsford Titanium Hinge Pins all throughout
-RPM Front/Rear Arms
-RPM Front/Rear Shock Towers
-RPM Front Bearing Carrier
-Traxxas Aluminum Front Castor Block (red)
-Traxxas Aluminum Rear Carrier (red)
-Traxxas Aluminum Rods Front/Rear (red)
-Traxxas Aluminum Steering Rack (red) (center drag link is still plastic stock)
-Aluminum Front Cross Brace
-Revo 3.3 Motor Guard (for rollover protection)
-Slash 4x4 Wheels w/90% Tread left
-Slash 4x4 Body in great shape with extra protection on the underside
-Traxxas 2075 Digital Servo
-2 Battery Straps for easier mounting
-Shaved inside of battery tray to fit Turnigy lipos. Does not affect chassis strength
-4 little set screws drilled through shock tower mounts to hold the screws in better. They tend to come out after awhile
-FLM Rear Axles w/drive cups (If they ever break they will replace them at little to no cost, which I doubt will break)
-Custom cut 2mm aluminum piece for mounting after market ESC (easy to remove for stock ESC mounting)
-Brand New Extra Chassis
-Brand New Extra Front Bumper
-Used Rear Bumper and Battery Hold Down Brace
-Medusa 3300kv 4 Pole Motor (rear end cap has been drilled for 2 little screws to better secure it. They had a tendany to come off. Also added a piece a black velcro to cover the holes from dirt)
Specs:
Kv-3300RPM/V
[email protected]
Rm-0.007
P In*-700W
I-75A
Max I* *-90A
Max V-18V
Dimensions-36 x 50mm
Shaft Dia-3.17mm
Weight-230g
Link to Medusa motor site
http://www.medusaproducts.com/motors/036-V2.htm
I think that is it for now unless I can think of anything else. It has the normal bottom scratches but runs good and is a blast. It also has 32 pitch or mod 8 gearing. Gearing is 13/54. I want $155 to the lower 48 and ships through USPS with paypal only.
For faster response email/call/text @ [email protected] 619-916-1286
Thanks for looking.
Last edited by Divey; 03-04-2011 at 10:25 AM. Reason: SOLD!!!!!