FS/FT Brushless ESC, 17.5T and Prog Card
02-23-2011, 10:03 AM
#1
FS/FT Brushless ESC, 17.5T and Prog Card
SOLD!!!!!!!!!!!
I have a Brushless ESC with 17.5T motor and Programming card I'd like to sell or trade. It runs fine I just switched to something that was sensored. I'd like to sell it for $45 or trade for a Futaba Fasst receiver (603ff or 603fs)
Here are the specs:
ESC Model: EZRUN-60A-SL
Dimensions: 31.5mm x 27.5mm x 24mm (The height of fan is not included)
Net Weight: 32g (without wires)
Continuous Current: 60A
Burst Current: 380A
Resistance: 0.0007 ohm
BEC Output: 6V/1.5A
Suitable Brushless Motor:
On-road: =>5.5T, Off-road: =>8.5T (2 cells Lipo / 6 cells NiMH)
On-road: =>8.5T, Off-road: =>13T (3 cells Lipo / 9 cells NiMH)
Working Battery Types: 4 - 9 Cells (NiMh) / 2 - 3 Cells (Li-Po)
Motor Type: Sensorless Brushless Motor
User Programmable: Available
Cable Type: 14 AWG (Battery and Motor)
Cable Length: 100mm (Motor), 150mm (Battery), 220mm (Receiver)
Recommend Model: RC Model 1/10 Car
ESC Features
Specially designed for RC car and truck, with excellent start-up, acceleration and linearity festures.
Compatible with sensorless brushless motor.
3 running modes suitable for different applications ("Forward with brake" mode, "Forward/Backward with brake" mode and "Rock crawier" mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes ("Punch") from "Soft" to "very aggressive" to be suitable for different chassis, tires and tracks.
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment.
User Programmable. Several program methods are supported, such as: The "SET" button on the ESC, the digital LED program card, the advanced LCD program box, the PC software, etc. The program card and program box are pocket-sized and they have friendly user interface to be easily used.
Dustproof
Program Card Specification
Dimension (Length x Width x Height): 88mm x 58mm x 14mm
Program Card Features
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells
I have a Brushless ESC with 17.5T motor and Programming card I'd like to sell or trade. It runs fine I just switched to something that was sensored. I'd like to sell it for $45 or trade for a Futaba Fasst receiver (603ff or 603fs)
Here are the specs:
ESC Model: EZRUN-60A-SL
Dimensions: 31.5mm x 27.5mm x 24mm (The height of fan is not included)
Net Weight: 32g (without wires)
Continuous Current: 60A
Burst Current: 380A
Resistance: 0.0007 ohm
BEC Output: 6V/1.5A
Suitable Brushless Motor:
On-road: =>5.5T, Off-road: =>8.5T (2 cells Lipo / 6 cells NiMH)
On-road: =>8.5T, Off-road: =>13T (3 cells Lipo / 9 cells NiMH)
Working Battery Types: 4 - 9 Cells (NiMh) / 2 - 3 Cells (Li-Po)
Motor Type: Sensorless Brushless Motor
User Programmable: Available
Cable Type: 14 AWG (Battery and Motor)
Cable Length: 100mm (Motor), 150mm (Battery), 220mm (Receiver)
Recommend Model: RC Model 1/10 Car
ESC Features
Specially designed for RC car and truck, with excellent start-up, acceleration and linearity festures.
Compatible with sensorless brushless motor.
3 running modes suitable for different applications ("Forward with brake" mode, "Forward/Backward with brake" mode and "Rock crawier" mode).
4 steps of maximum reverse force adjustment.
Proportional ABS brake function with 4 steps of maximum brake force adjustment, 8 steps of drag-brake force adjustment and 4 steps of initial brake force adjustment.
9 start modes ("Punch") from "Soft" to "very aggressive" to be suitable for different chassis, tires and tracks.
Multiple protection features: Low voltage cut-off protection for lithium or nickel battery / Over-heat protection / Throttle signal loss protection / Motor blocked protection.
8 steps of timing adjustment.
User Programmable. Several program methods are supported, such as: The "SET" button on the ESC, the digital LED program card, the advanced LCD program box, the PC software, etc. The program card and program box are pocket-sized and they have friendly user interface to be easily used.
Dustproof
Program Card Specification
Dimension (Length x Width x Height): 88mm x 58mm x 14mm
Program Card Features
- Running Mode
- Drag Brake Force
- Low Voltage Cut-Off Threshold
- Start Mode
- Maximum Brake Force
- Maximum Reverse Force
- Initial Brake Force
- Throttle Neutral Range
- Timing
- Over-Heat Protection
- Motor Rotation
- Lipo Cells
Last edited by bobsavenger; 02-23-2011 at 12:42 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
