Need to pay bills! sale
#1
Need to pay bills! sale
Im going to have to have a second back surgery (last one was just under 10K after insurance. This one will be more invasive & more expensive!
Im sure Ill have more to come
No trades. I need to pay bills... All prices are "Or Best Offer." Shipping is extra @ exact cost....
Add 3% for paypal fees.
I have 100% with 200+ positives on ebay. several positives on rc10talk, Rcgroups... along with other sites as well.
.
Got this used to do a scale VW Bus project, but cant aford any project!
Dont know much about them. Think its all stock, but not 100% sure. Its defanatly a cool litle crawler. I drove it around 1 time to be sure it worked & it had no issues.
Previous owner put a tamiya conector on it to run a 6 cell battery & cut the plate. He also added a plate to the 3 link for the reciever.
owners manual will be included.
Wont come with the Losi radio. (that was damaged in shipping) I may be able to get a traxxas radio & mini reciever to put in it. Ill have to see.
All you need to get this thing going is a your radio, & batery. I hate to sell it
Asking $140 OBO
.
.
Radio shack Tandy corp F-1 indy car $10
.
X-mods nissan skiline (untested- I dont have any way to charge it up.) has lipos glued inside body (transmiter needs antana) $5
.
Park zone Vapor... needs a battery... $35 OBO
.
Megatech Night Flyer. Needs a new prop (I have a brand new one, just cant find it at the molment) $35 OBO
~~~PARTS~~~
PENDING 4 Unknown brand 2.2 Beed lock wheeels no striped holes, 12mm hex $15
.
2 HPI foam tires & wheels, 12 mm hex $5 OBO
.
4 HPI 2.2 wheels, 12 mm hex $10
.
4 no name 1.9 monster truck tires (new) No they wont fit monster beetle or Black foot wheels $8 OBO
.
air filter (from traxxas 2.5 or 3.3 I think) $2
.
Losi XXX gears $3 (-98t red looks new, 84t black one is lightly used) RPM arm $2
.
Team losi # A-3083 XX Retrofit yoke & screw set + a good used set of dog bones/ drive shafts $10
.
Like new T-Maxx rear body mount $2 (may have never been used?)
.
~~~BODYS~~~
.
Maxtec? Dodge Rampage body aproximatly 10 3/4 wheel base & about 5 7/8 wide at fenders. Has lights wired in, full depth bed, etc. Could be a unique scaler body. $15
.
Tyco Ford body hard plastic aproximatly 10 inch wheel base (pics on a blackfoot & Stampede. cars not included, just for size refferance) $15 OBO
.
Toyota Tundra body. hard plastic. wheel base is aprox 10 1/4 X 7 3/8 wide @ front fenders & 8 @ rear. (pics on a stampede. car not included, just for size refferance) $15
~~~Electronics. All have been tested & work ulless marked otherwise~~~
Losi Mini-T radio with reciever/speed control & servo works $20 (needs new batterie wires & xtals)
.
Traxxas PTI drive, sensor & servo (dont know if it works or not, not sure how it works) will include NIP micro servo gear set #2062 $8
.
Duratrax 20 amp nicad & NI Mh discharger has box & instructions. works $12
.
Tekin BC5A AC/DC peek charger works $10
.
Tekin BC 100L charger works $10
.
Vision Peak2 AC/DC peak detection charger. works good. $20
.
Parkzone Dc peek charger 1.8 (plug was replaced) works $6
.
Tyco 9.6 charger, Tyco 7.2 charger, Nikko 7.2 charger $2 each
.
MRC RB 460 12 volt charger. works $8
.
Old school Hi tec servos (Untested) $5 for all
.
PLEASE email me offers @ [email protected] for fastes response... Im not on her all thye time & for some reason I dont get notifications.
Yes I have it checked, they justy dont come through.
Add 3% for paypal
Im sure Ill have more to come
No trades. I need to pay bills... All prices are "Or Best Offer." Shipping is extra @ exact cost....
Add 3% for paypal fees.
I have 100% with 200+ positives on ebay. several positives on rc10talk, Rcgroups... along with other sites as well.
.
Got this used to do a scale VW Bus project, but cant aford any project!
Dont know much about them. Think its all stock, but not 100% sure. Its defanatly a cool litle crawler. I drove it around 1 time to be sure it worked & it had no issues.
Previous owner put a tamiya conector on it to run a 6 cell battery & cut the plate. He also added a plate to the 3 link for the reciever.
owners manual will be included.
Wont come with the Losi radio. (that was damaged in shipping) I may be able to get a traxxas radio & mini reciever to put in it. Ill have to see.
All you need to get this thing going is a your radio, & batery. I hate to sell it
Asking $140 OBO
.
.
Radio shack Tandy corp F-1 indy car $10
.
X-mods nissan skiline (untested- I dont have any way to charge it up.) has lipos glued inside body (transmiter needs antana) $5
.
Park zone Vapor... needs a battery... $35 OBO
.
Megatech Night Flyer. Needs a new prop (I have a brand new one, just cant find it at the molment) $35 OBO
~~~PARTS~~~
PENDING 4 Unknown brand 2.2 Beed lock wheeels no striped holes, 12mm hex $15
.
2 HPI foam tires & wheels, 12 mm hex $5 OBO
.
4 HPI 2.2 wheels, 12 mm hex $10
.
4 no name 1.9 monster truck tires (new) No they wont fit monster beetle or Black foot wheels $8 OBO
.
air filter (from traxxas 2.5 or 3.3 I think) $2
.
Losi XXX gears $3 (-98t red looks new, 84t black one is lightly used) RPM arm $2
.
Team losi # A-3083 XX Retrofit yoke & screw set + a good used set of dog bones/ drive shafts $10
.
Like new T-Maxx rear body mount $2 (may have never been used?)
.
~~~BODYS~~~
.
Maxtec? Dodge Rampage body aproximatly 10 3/4 wheel base & about 5 7/8 wide at fenders. Has lights wired in, full depth bed, etc. Could be a unique scaler body. $15
.
Tyco Ford body hard plastic aproximatly 10 inch wheel base (pics on a blackfoot & Stampede. cars not included, just for size refferance) $15 OBO
.
Toyota Tundra body. hard plastic. wheel base is aprox 10 1/4 X 7 3/8 wide @ front fenders & 8 @ rear. (pics on a stampede. car not included, just for size refferance) $15
~~~Electronics. All have been tested & work ulless marked otherwise~~~
Losi Mini-T radio with reciever/speed control & servo works $20 (needs new batterie wires & xtals)
.
Traxxas PTI drive, sensor & servo (dont know if it works or not, not sure how it works) will include NIP micro servo gear set #2062 $8
.
Duratrax 20 amp nicad & NI Mh discharger has box & instructions. works $12
.
Tekin BC5A AC/DC peek charger works $10
.
Tekin BC 100L charger works $10
.
Vision Peak2 AC/DC peak detection charger. works good. $20
.
Parkzone Dc peek charger 1.8 (plug was replaced) works $6
.
Tyco 9.6 charger, Tyco 7.2 charger, Nikko 7.2 charger $2 each
.
MRC RB 460 12 volt charger. works $8
.
Old school Hi tec servos (Untested) $5 for all
.
PLEASE email me offers @ [email protected] for fastes response... Im not on her all thye time & for some reason I dont get notifications.
Yes I have it checked, they justy dont come through.
Add 3% for paypal
Last edited by airdreams1; 06-13-2011 at 12:49 PM.
#2
stuff
hey bud i will take the beadlocks, the 12 volt charger, the vapor and all the servos.