Lots of stuff FS/FT
01-25-2011, 07:30 PM
#1
Lots of stuff FS/FT
I have a Tmaxx and Sportwerks Recoil pro arr for sale
The Recoil comes with a tekin mini rage brushless system.
The tmaxx is a 2.5 with a 3.3 engine, the carb on the engine has on one run on it and the ezstart wire harness and motor has been recently replaced. Also all fuel tubing has been replaced.The engine needs a new one way bearing. Also the transmitter works but the trucks reverse gear doesn't work.
The recoil needs a reciever, transmitter, and battery to complete.
I also have a , Novak mini spy reversible esc, and a megpro roller with aluminum dogbones, rc18t diffs, and graphite driveshaft.
The speed control on the recoil has a deans plug but the batteries i was using didnt so i made an adapter.
$70 for the recoil with the brushed setup. *Sold*
$90 for the tmaxx(includes hex and turnbuckle wrenches, socket wrench, ez-start, and glow igniter and charger for igniter.)Has new diffs front and rear, metal skid plates, new throttle servo, new spur gear, new carb, new pipe. *SOLD*
$45 dollars for the megapro/propulse roller. Has rc18 balldiffs, aluminum dogbones, graphite drive shaft, and adjustable aluminum turnbuckles.
$40 dollars for JR NES-4735 servo, installed but never used.
$15 team orion mini baja motor never used. *SOLD*
$10 each. $20 for all three. 3 pro pulse 1500mah batteries
$20 losi 8ight 2.0 gas tank
$20 losi 8ight 2.0 reciever box
$20 Ofna 1700 mah reciever hump pack, needs new connector soldered on. If i find one, i will put one on.
$30 stock mini lst2 speed control and motors
$60 for roller with sprint esc *SOLD*
$35 waterproof traxxas xl-5 esc like new.
$25 Duratrax sprint esc.
hitec micro servo is gone.
make an offer on anything.
looking for about 240 for everything or a trade for a working, good condition 1/8 scale esc/motor combo.
I will also consider other trades obo.
Paypal [email protected]
The Recoil comes with a tekin mini rage brushless system.
The tmaxx is a 2.5 with a 3.3 engine, the carb on the engine has on one run on it and the ezstart wire harness and motor has been recently replaced. Also all fuel tubing has been replaced.The engine needs a new one way bearing. Also the transmitter works but the trucks reverse gear doesn't work.
The recoil needs a reciever, transmitter, and battery to complete.
I also have a , Novak mini spy reversible esc, and a megpro roller with aluminum dogbones, rc18t diffs, and graphite driveshaft.
The speed control on the recoil has a deans plug but the batteries i was using didnt so i made an adapter.
$70 for the recoil with the brushed setup. *Sold*
$90 for the tmaxx(includes hex and turnbuckle wrenches, socket wrench, ez-start, and glow igniter and charger for igniter.)Has new diffs front and rear, metal skid plates, new throttle servo, new spur gear, new carb, new pipe. *SOLD*
$45 dollars for the megapro/propulse roller. Has rc18 balldiffs, aluminum dogbones, graphite drive shaft, and adjustable aluminum turnbuckles.
$40 dollars for JR NES-4735 servo, installed but never used.
$15 team orion mini baja motor never used. *SOLD*
$10 each. $20 for all three. 3 pro pulse 1500mah batteries
$20 losi 8ight 2.0 gas tank
$20 losi 8ight 2.0 reciever box
$20 Ofna 1700 mah reciever hump pack, needs new connector soldered on. If i find one, i will put one on.
$30 stock mini lst2 speed control and motors
$60 for roller with sprint esc *SOLD*
$35 waterproof traxxas xl-5 esc like new.
$25 Duratrax sprint esc.
hitec micro servo is gone.
make an offer on anything.
looking for about 240 for everything or a trade for a working, good condition 1/8 scale esc/motor combo.
I will also consider other trades obo.
Paypal [email protected]
Last edited by andersonwal; 03-04-2011 at 10:49 AM.
01-26-2011, 03:21 AM
#2
I will also consider any reasonable offer.
01-26-2011, 09:53 AM
#3
Will try to post pics of at least the tmaxx by end of the day.
01-26-2011, 10:20 AM
#4
will also throw in fuel bottle and glow plug lighter for t-maxx. The t-maxx also has brand new front and rear diffs, a new throttle servo, engine mount, and new fuel tank all with only 3 runs on them to make sure they were working correctly. Also includes necessary tools for maintenance.
01-28-2011, 11:28 AM
#5
Bump
sorry no pics yet, camera not working. Pics will get uploaded as soon as i can find a working camera.
sorry no pics yet, camera not working. Pics will get uploaded as soon as i can find a working camera.
01-28-2011, 11:53 AM
#6
would you trade your tmaxx as a roller for a 1/16 slash roller? you do not have to include glow igniter, tools, or the new servo.
also please email me at [email protected] for a quicker (much) response.
also please email me at [email protected] for a quicker (much) response.
02-03-2011, 08:43 PM
#7
bump sorry pics arent up yet. i have been sick.
02-04-2011, 07:04 AM
#8
pictures now up bump.
I will also take trades for a .21 buggy engine and pipe in good running condition.
I will also take trades for a .21 buggy engine and pipe in good running condition.
02-04-2011, 11:08 AM
#9
Afternoon bump
also i have the reciver box and reciever for it. just forgot to install them for the pic.
also i have the reciver box and reciever for it. just forgot to install them for the pic.
02-04-2011, 01:38 PM
#10
02-04-2011, 02:25 PM
#11
all pms replied
02-04-2011, 06:42 PM
#12
bump
02-05-2011, 07:58 AM
#13
bump
02-05-2011, 09:49 AM
#14
for this weekend i will sell the tmaxx for 100 dollars.
