large scale Hydro Boat and other boat parts f/s
#1
large scale Hydro Boat and other boat parts f/s
Had a Trade deal with some SCHMUCK on here. Struck a deal to trade this Hydro Hull, the dual rudder system, a 1/4 scale servo, the 1/4 flex drive and tube, and an old AM Futaba 4chn radio i had here for his ONE Art Attack snowmobile with the motor. He was getting around 600.00 in gear, for 350.00 in gear, and the shipping on my end was near 80.00 after building a box and paying 65.00 to ship it.
we initially planned to ship this weekend, but i have to postpone due to money being a little tight for another week. Gotta pay my truck payment, ins and have food for the family to eat, and this little bitch is pissy becuase i told him it will be a week now before i can ship my package. Hes not shipping until i can ship as thats how i told him i wanted to do it. that way we are shipping out the same day.
So if your looking to buy one of these Art Attack sleds, keep looking. This Kid is way unreasonable about how much he feels his TOY SLED is worth, and DOES NOT understand patients is a virute, so i told him to shove his trade deal.
SO, whit that said, everything in this ad is still available.
Decided I will likely not take the time to build this beast, so I should sell it to someone who will give it the time it deserves. I have other boat parts for sale not for the dydro.
all parts are New and Unused. Save big over buying these items retail.
First up is a Barnstormer Boats 48in Hydroplane kit. This boat has a nice layup, and does not need stringers due to the design and layup. Gel coat is really nice conditon on the whole bottom. Does have a very small chip on rear right sponson on the rear side of the sponson about 1 inch above (see blury Pic lol). Very small, but will need to be repaired during hull assembly.
Though it is designed to not need stringers, you can build this hull with stringers if you want, and some have. Either way works. Hull is a 3 piece kit, Bottom (white), Top (red) and Cowling (red). It is a Builders KIT as I noted, so, bottom and top need to be fiberglassed together, and the top and cover will need to be setup with latches to hold the cowling on.
This is for the 3 hull pieces only, nothing else included...
2WD Traxxas Slash body is for size comparrisons only, and not offered for, or included in sale.
Measuers:
48 in long from nose to transom, 23in wide at sponsons, and 8ish inches high with cowling.
These are designed for a 26cc race ported 2 stroke marine motor, but would be an insaine brushless conversion. Shipping on this will be a bit expensive as the package wil be pretty large at 50 long 30 wide and 10 high minimum. (approx 65.00 shipping quote to NY from Michigan.)
Asking 175.00 OBO, plus shipping.
High End US MADE, Dual Rudder and Drive setup. This is for a Large Deep Vee (60 inch plus) (Note: I think this is a Top Secret item from a few years back. I see that Ebay has a knockoff guy selling almost the same item out of china for 70.00 and 25.00 shipping. dont be fooled. this is the real deal Made in the US, just cant remember if it was a Top Secret item or not). Never did get a large Deep Vee to use it on, so out it goes. 4 inches from mount to outter edge of rudders. rudders are 6 inches long, conneced and move as one piece. very smooth action. drive is for 1/4 flex or solid shaft.
Asking 85.00 shipped
1ft piece of 1/4in flex drive and lined brass strut tube
Asking 25.00 shipped
1/4 drive housing/mount for large Deep Vee/Hydro boat. 3 inches long 1 1/2 inches tall at mounting point
Asking 55.00 shipped
2 500CC fuel bags, Gasoline Rated. (May be larger, but atleast 500cc)
asking 18.00 shipped for both.
Large Deep Vee Trim Tabs, 2. also for 60 in or larger. (i had plans on getting a 72 or maybe an 84 in Cigar or Deep Vee to run, Slash tire for size comparrison only). 1 1/2 in wide, 4 inches long. 1 1/4 inch tall at mounting point.
Asking 50.00 shipped
note: for size comparrisons, I have placed a 2WD Slash wheel in the pics. wheel is not included and only for size comparrison, as is the slash body used in above pics.
All Pricing and Shipping for CON/US only. OUTSIDE US will Pay ACTUAL SHIPPING
size and comparrison pics of items
PM me with any questions. If you buy the hull, i ll include shipping of any of the other parts with the hull. will combine shipping on parts as well. Shipping outside CON/US will be actual, and paid by Buyer.
Thanx for looking
Tim
we initially planned to ship this weekend, but i have to postpone due to money being a little tight for another week. Gotta pay my truck payment, ins and have food for the family to eat, and this little bitch is pissy becuase i told him it will be a week now before i can ship my package. Hes not shipping until i can ship as thats how i told him i wanted to do it. that way we are shipping out the same day.
So if your looking to buy one of these Art Attack sleds, keep looking. This Kid is way unreasonable about how much he feels his TOY SLED is worth, and DOES NOT understand patients is a virute, so i told him to shove his trade deal.
SO, whit that said, everything in this ad is still available.
Decided I will likely not take the time to build this beast, so I should sell it to someone who will give it the time it deserves. I have other boat parts for sale not for the dydro.
all parts are New and Unused. Save big over buying these items retail.
First up is a Barnstormer Boats 48in Hydroplane kit. This boat has a nice layup, and does not need stringers due to the design and layup. Gel coat is really nice conditon on the whole bottom. Does have a very small chip on rear right sponson on the rear side of the sponson about 1 inch above (see blury Pic lol). Very small, but will need to be repaired during hull assembly.
Though it is designed to not need stringers, you can build this hull with stringers if you want, and some have. Either way works. Hull is a 3 piece kit, Bottom (white), Top (red) and Cowling (red). It is a Builders KIT as I noted, so, bottom and top need to be fiberglassed together, and the top and cover will need to be setup with latches to hold the cowling on.
This is for the 3 hull pieces only, nothing else included...
2WD Traxxas Slash body is for size comparrisons only, and not offered for, or included in sale.
Measuers:
48 in long from nose to transom, 23in wide at sponsons, and 8ish inches high with cowling.
These are designed for a 26cc race ported 2 stroke marine motor, but would be an insaine brushless conversion. Shipping on this will be a bit expensive as the package wil be pretty large at 50 long 30 wide and 10 high minimum. (approx 65.00 shipping quote to NY from Michigan.)
Asking 175.00 OBO, plus shipping.
High End US MADE, Dual Rudder and Drive setup. This is for a Large Deep Vee (60 inch plus) (Note: I think this is a Top Secret item from a few years back. I see that Ebay has a knockoff guy selling almost the same item out of china for 70.00 and 25.00 shipping. dont be fooled. this is the real deal Made in the US, just cant remember if it was a Top Secret item or not). Never did get a large Deep Vee to use it on, so out it goes. 4 inches from mount to outter edge of rudders. rudders are 6 inches long, conneced and move as one piece. very smooth action. drive is for 1/4 flex or solid shaft.
Asking 85.00 shipped
1ft piece of 1/4in flex drive and lined brass strut tube
Asking 25.00 shipped
1/4 drive housing/mount for large Deep Vee/Hydro boat. 3 inches long 1 1/2 inches tall at mounting point
Asking 55.00 shipped
2 500CC fuel bags, Gasoline Rated. (May be larger, but atleast 500cc)
asking 18.00 shipped for both.
Large Deep Vee Trim Tabs, 2. also for 60 in or larger. (i had plans on getting a 72 or maybe an 84 in Cigar or Deep Vee to run, Slash tire for size comparrison only). 1 1/2 in wide, 4 inches long. 1 1/4 inch tall at mounting point.
Asking 50.00 shipped
note: for size comparrisons, I have placed a 2WD Slash wheel in the pics. wheel is not included and only for size comparrison, as is the slash body used in above pics.
All Pricing and Shipping for CON/US only. OUTSIDE US will Pay ACTUAL SHIPPING
size and comparrison pics of items
PM me with any questions. If you buy the hull, i ll include shipping of any of the other parts with the hull. will combine shipping on parts as well. Shipping outside CON/US will be actual, and paid by Buyer.
Thanx for looking
Tim
Last edited by Timmahh; 01-29-2011 at 09:27 AM.