HN/OFNA LD3 Tangerine Champion Edition
#1
HN/OFNA LD3 Tangerine Champion Edition
It's time for my Tangerine HN LD3 Champion Edition and me to part company. simply because I do not know when I will have time to run this car.
The car is basically a brand new (but built up) Champion edition with all alloy bits in Orange (or Tangerine! ). the car comes with all the HN/OFNA options, and the ones that the car did not come with I remove from my other LD3 and put onto this car, namely;
1. Alloy lower A arm mounts Front/Rear
2. Alloy steering servo mounts
3. Alloy throttle servo mounts
The car was built up and I ran 1 tank of fuel through it with the car sitting on a starterbox. That was when I decided to keep this car MINT!
Instead of the original HN centax clutch, I modified the car to use a Mugen MTX3 centax with Kyosho 1.0 pitch gears. I will be including this combination instead of the HN centax (which is less consistent than the Mugen one anyway). As a result of the Mugen centax installation I had to modify the chassis a little, and you can see from the pictures what I have done.
The car also includes the following NIP spares;
1. Plastic gearbox x2
2. Front plastic bumper x1
3. Upper and Lower A arm set (full car) x1
4. Plastic shock tower x1
5. Gears- several
6. Front hubs x2
7. Rear hubs x3
8. CVD x1 (used, but straight)
9. Pivot balls x2
and anything else I can find in the mean time.
The car will come with exhaust (1 tank new!)
The weakest part of the car which is the left side upper deck graphite brace has been re-inforced around the fuel tank area. This was where it broke on my last car.
Package does not include engine and electronics.
Looking for USD 280 + shipping.
EMS (with tracking) shipping to the States will be USD40.
Will take Paypal with no additional charge.
I think I am being fairly reasonable with the price, so it is firm.
Not looking for trades at this moment.
Thanks for Looking.
Tim
The car is basically a brand new (but built up) Champion edition with all alloy bits in Orange (or Tangerine! ). the car comes with all the HN/OFNA options, and the ones that the car did not come with I remove from my other LD3 and put onto this car, namely;
1. Alloy lower A arm mounts Front/Rear
2. Alloy steering servo mounts
3. Alloy throttle servo mounts
The car was built up and I ran 1 tank of fuel through it with the car sitting on a starterbox. That was when I decided to keep this car MINT!
Instead of the original HN centax clutch, I modified the car to use a Mugen MTX3 centax with Kyosho 1.0 pitch gears. I will be including this combination instead of the HN centax (which is less consistent than the Mugen one anyway). As a result of the Mugen centax installation I had to modify the chassis a little, and you can see from the pictures what I have done.
The car also includes the following NIP spares;
1. Plastic gearbox x2
2. Front plastic bumper x1
3. Upper and Lower A arm set (full car) x1
4. Plastic shock tower x1
5. Gears- several
6. Front hubs x2
7. Rear hubs x3
8. CVD x1 (used, but straight)
9. Pivot balls x2
and anything else I can find in the mean time.
The car will come with exhaust (1 tank new!)
The weakest part of the car which is the left side upper deck graphite brace has been re-inforced around the fuel tank area. This was where it broke on my last car.
Package does not include engine and electronics.
Looking for USD 280 + shipping.
EMS (with tracking) shipping to the States will be USD40.
Will take Paypal with no additional charge.
I think I am being fairly reasonable with the price, so it is firm.
Not looking for trades at this moment.
Thanks for Looking.
Tim
#2
Underside of car......
#3
Modification to chassis for centax
#4
more pics...............
#5
If you would like more details on the car feel free to PM me. You can find more pics of the car during its build up in the Nitro on road/ LD3Pro forum around page 45.
#6
Forgot the pic of the spares....
#7
Sent you a PM!!
#8
fordman500- PM'd you back
#9
Tech Fanatic
You have a PM.
Thanks, racer_RR
Thanks, racer_RR
#10
ttt