R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   R/C Items: For Sale/Trade (https://www.rctech.net/forum/r-c-items-sale-trade-16/)
-   -   Hyperr 10TT roller Dubbed the "super TT" (https://www.rctech.net/forum/r-c-items-sale-trade/464049-hyperr-10tt-roller-dubbed-super-tt.html)

S/X Runner 12-22-2010 08:42 PM

Hyperr 10TT roller Dubbed the "super TT"
 
The roller is SOLD

http://lh5.ggpht.com/_ut7giRJ9KcQ/TP...ture%20040.jpg


The ultimate Hyper 10TT roller. It has been dubbed the "Super TT" for a good reason.

Upgraded parts on the truggy,

Full saddle pack conversion!! All the work has been done!

All brand new AE B44 parts were used to convert it to Saddle packs. - 16.00

3 saddle battery packs with balance plugs and deans. They have about 10 cycles each. All 3 were charged at 1C every time and always balanced. They will be shipped in storage mode just in case you don't run them for a while. - 135.00

Cvds all 4 corners - 28.00

STRC parts...front bulkhead, center diff brace, aluminum wheel hexs, spur, rear uprights - 72.00

St upper center diff plate (holes have countersunk so you can place your RX on it) - 5.00

Steel spur (no more leaky diff) - 21.00

Updated black 54mm steering akerman bar - 4.00

Replaced all rod ends with captured ends per Tim bump recommendation. - 11.00

Pro-line bowties M3 mounted on stock TT rims (about 70% tread left) - can not price due to being used.

Pro-line Gladiators M2 compound. (about 90% tread left) - can not price due to being used.

2 hole shock pistons in the rear - 5.00

1 hole shock pistons in the front - 6.00

Teckno long shank pinions (for saddle pack set-up) - 33.00


Extra parts (Brand new in packages!!!)

Front hubs - 9.00
Front upper arms - 6.00
Front lower arms - 8.00
Rear lower arms (new style) - 9.00
A brand new body - 25.00
Shock seal set - 7.00
Servo Saver set - 6.00
Misc. new bearings just in case one or another go bad or go out. - 13.00


Option/hop-up parts (brand new in the packages!!!)

Front/front CNC hinge pin holder - 7.50
Front/rear CNC hinge pin holder - 7.50
Rear/rear hinge pin holder - 7.50

Just to get a total for everything I' m adding in the roller price - 200.00

The total without adding in the tires I have bought (you get those also) is - 670.00!!


All stock parts that were replaced with upgrades are included with the truggy. You will get EVERYTHING.

A couple other notes on the truggy...
The chassis has been drilled and countersunk for the stock battery tray to be moved forward to enable more forward traction as well as mounting the ESC behind the battery on the chassis. You can run the stock battery tray in the stock location or in the forward location. Of course that is all if you do not want to run the saddle pack set-up.
There is absolutely nothing wrong with the truggy at all.
It rails like no other TT I have ever driven, seriously. Im not just saying that to hype this one up, it literally drives WAY better than the 10 or so I have driven. It is super dialed.

It will be shipped with the original box and packaging as well as all of the paperwork that came with it.

I am letting it go for 425.00!! That is a freaking steal. (paypal as a gift from checking or debit otherwise add 3.5%) otherwise add 3.5% to the total.
I can also through in a Traxxas 2.4ghz radio and 5ch RX for 50.00. The radio and receiver are brand new, They have never even been turned on!!!

Email [email protected]

***Note the ESC, Moto and Servo do not come with this price***
http://lh5.ggpht.com/_ut7giRJ9KcQ/TR...A/s912/016.JPG

http://lh5.ggpht.com/_ut7giRJ9KcQ/TR...w/s912/017.JPG

Just a good shoot of the diff cups, steel spur and the STRC diff brace.
http://lh5.ggpht.com/_ut7giRJ9KcQ/TR...%20%282%29.JPG

+ YouTube Video
ERROR: If you can see this, then YouTube is down or you don't have Flash installed.


Hyper10TT hyper 10tt 10 TT ofna hobao 10tte TTe

S/X Runner 12-23-2010 05:23 AM

Top of the morning to ya. :tire:

S/X Runner 12-24-2010 08:20 AM

Guess what, it's the morning again.
:tire::tire:

S/X Runner 12-25-2010 07:34 AM

If you wanna work out a deal with no batteries or no whatever other part or piece, just let me know.

It really is a great truck with a lot of work into it.

lbsnoopy 12-25-2010 08:31 AM

??
 
got any pics of the chasis ? will u sell it as a roller , no electronics ? my bad that is the roller price , ok will you take anything in trade ?

S/X Runner 12-25-2010 09:16 AM

Sorry, No trades. Just looking to sell it outright.

http://lh3.ggpht.com/_ut7giRJ9KcQ/TR...s640/photo.JPG

There is some slight wear on the chassis, but completely normal. No huge gouges or anything like that.

You can see where I drilled and countersunk the holes to move the stock battery tray forward. This thing is ready to go in stock battery or saddle pack mode.

S/X Runner 12-26-2010 08:02 AM

The day after Christmas. Whoo Hoo!!

titotime 12-28-2010 02:39 PM

Bump for an awesome truck! :tire:

S/X Runner 12-29-2010 07:19 AM

Thanks Tito.

Great truck guys. PM me an offer...who knows maybe I'll take it.

S/X Runner 12-29-2010 06:43 PM

PM replied to.

S/X Runner 12-30-2010 10:31 AM

:tire::tire:

titotime 12-30-2010 06:14 PM

Bump for a Sick truck! :tire::tire:

S/X Runner 12-31-2010 09:06 AM

:tire::tire::tire:

S/X Runner 12-31-2010 11:04 PM

Roller sold.


All times are GMT -7. It is currently 05:11 PM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.