ROLLERS | HB D8e | AE SC8e | PE SLASH | FT T4.1 | FT B4 | MINI REVO RTR w/LIPOS!!!
#1
ROLLERS | HB D8e | AE SC8e | PE SLASH | FT T4.1 | FT B4 | MINI REVO RTR w/LIPOS!!!
Hotbodies D8e tekno converted roller. Has 36mm motor mount (Novak) but also comes with a whole separate chassis and motor mount that accepts Tekin/Castle/Neu motors. You just can't swap the mounts over so you have to run what the chassis is set up for! Comes with nice parts lot and extra set of balding Panther 2.0s. Has bald Bar Codes installed. Extra assembled diffs, arms, hardware, knuckles, etc all included. Even the box the parts are in!
I don't know much about this buggy. I bought it at the consignment booth at the local track. Has big bore shocks and diffs feel smooth. It's clean too but I never ran it.
$225 shipped or offer!!!
ONLY TRADE CONSIDERED FOR ULTIMA SC-R OR POWERLAB 8 CHARGER BUT YOU MUST SHIP FIRST!!!
I ONLY SHIP TO THE LOWER 48 AND ACCEPT PAYPAL ONLY.
NO DIBS, NO HOLDING. FIRST TO PAY WINS!!! DEFAULT SHIPPING IS USPS PARCEL POST. IF YOU WANT DIFFERENT LET ME KNOW.
I don't know much about this buggy. I bought it at the consignment booth at the local track. Has big bore shocks and diffs feel smooth. It's clean too but I never ran it.
$225 shipped or offer!!!
ONLY TRADE CONSIDERED FOR ULTIMA SC-R OR POWERLAB 8 CHARGER BUT YOU MUST SHIP FIRST!!!
I ONLY SHIP TO THE LOWER 48 AND ACCEPT PAYPAL ONLY.
NO DIBS, NO HOLDING. FIRST TO PAY WINS!!! DEFAULT SHIPPING IS USPS PARCEL POST. IF YOU WANT DIFFERENT LET ME KNOW.
Last edited by Neu_Racer; 12-19-2010 at 11:10 PM.
#2
Sc8e
NOT CONVERTED. Came from factory as an E! Big bore shocks, brand new unused body with a nice paint job. I got this from another guy on the forum fairly recently and never got around to using it. Can't let it sit here any longer. Comes with 2 extra sets of stock wheels/tires and nothing else.
$265 SHIPPED OR OFFER!!
NOT CONVERTED. Came from factory as an E! Big bore shocks, brand new unused body with a nice paint job. I got this from another guy on the forum fairly recently and never got around to using it. Can't let it sit here any longer. Comes with 2 extra sets of stock wheels/tires and nothing else.
$265 SHIPPED OR OFFER!!
#3
Platinum Slash
Came as an Ultimate edition but is now a roller so is the same as the PE. All stock except for RPM arms all around.
Definitely used but still very driveable. Big bores, sway bars, center diff, aluminum knuckles and castors (rears are plastic now) and the SG1 tires make it a fun ride! Body is for a 2wd and may need new holes drilled in the front but works. Not the prettiest but does the trick.
$195 shipped or offer!!!
Came as an Ultimate edition but is now a roller so is the same as the PE. All stock except for RPM arms all around.
Definitely used but still very driveable. Big bores, sway bars, center diff, aluminum knuckles and castors (rears are plastic now) and the SG1 tires make it a fun ride! Body is for a 2wd and may need new holes drilled in the front but works. Not the prettiest but does the trick.
$195 shipped or offer!!!
#4
Factory Team T4.1
Bought new a couple months ago. Built it and installed front and rear quick change hubs. Everything else stock. Quick changes allow you to rotate tires front and rear (saves LOTS of money on tire wear!) and is nice to have. Cost $80 for the set by itself!
Have a lightly used bunch of tires with it. All clay compound and mostly newer panther switch 2.0s. Also a set of barcodes and a pair of pins. Can't remember the make, didn't use them. Panthers installed too.
Also have the inline quick change front axles custom made and a couple extra hubs. Has 6 bodies total, none in real great shape but most very usable.
$250 shipped of offer!!!
Bought new a couple months ago. Built it and installed front and rear quick change hubs. Everything else stock. Quick changes allow you to rotate tires front and rear (saves LOTS of money on tire wear!) and is nice to have. Cost $80 for the set by itself!
Have a lightly used bunch of tires with it. All clay compound and mostly newer panther switch 2.0s. Also a set of barcodes and a pair of pins. Can't remember the make, didn't use them. Panthers installed too.
Also have the inline quick change front axles custom made and a couple extra hubs. Has 6 bodies total, none in real great shape but most very usable.
$250 shipped of offer!!!
#6
Mini Revo/Slash VXL w/ 4 1700mah lipos, charger, LOTS of parts!!!
Originally a 1/16 Slash. Converted to a Revo minus the body and bumpers. Has Revo wheels with Caliber tires in great shape. NIB Center diff not installed along with 11 arms, set of rods, Slash wheels, hardware, parts, etc. Including a 2-3s lipo balance charger and standard 27mhz radio. I didn't test the receiver but it came in the box so assuming it works. I've got a Traxxas 2.4ghz I can include for $35 extra. Needs wheel pins and hexes installed. Hexes are there, may need a couple pins.
$250 shipped or offer!!!
Originally a 1/16 Slash. Converted to a Revo minus the body and bumpers. Has Revo wheels with Caliber tires in great shape. NIB Center diff not installed along with 11 arms, set of rods, Slash wheels, hardware, parts, etc. Including a 2-3s lipo balance charger and standard 27mhz radio. I didn't test the receiver but it came in the box so assuming it works. I've got a Traxxas 2.4ghz I can include for $35 extra. Needs wheel pins and hexes installed. Hexes are there, may need a couple pins.
$250 shipped or offer!!!
#9
interested in t4
Would u take $110.00 shipped for just the roller and spare parts, no motor/esc and no tires,just the roller and any spare parts u may have. Text or call eric at 910-584-5211
#10
I need to sell but I'm not going to give it away.
Just a quick add here:
Ft T4.1 = $240
front/rear QC axles = $80
Parts (invested well over $150) asking = $65
That's about $500 I have into this stuff.
I'll throw in all the parts I have free if purchased with the truck at $250 but $110 is not gonna happen, sorry.
And I'm not looking to separate the wheels because they are QC and not usable on a standard T4.
Thanks for looking.
Just a quick add here:
Ft T4.1 = $240
front/rear QC axles = $80
Parts (invested well over $150) asking = $65
That's about $500 I have into this stuff.
I'll throw in all the parts I have free if purchased with the truck at $250 but $110 is not gonna happen, sorry.
And I'm not looking to separate the wheels because they are QC and not usable on a standard T4.
Thanks for looking.
#11
And just to be clear, I will include ALL the stuff found in the first 3 pics of this post: http://www.rctech.net/forum/r-c-item...slash-4x4.html
Not the extra wheels and QC hubs in the 4th and 5th pic.
Not the extra wheels and QC hubs in the 4th and 5th pic.
#12
I need to sell but I'm not going to give it away.
Just a quick add here:
Ft T4.1 = $240
front/rear QC axles = $80
Parts (invested well over $150) asking = $65
That's about $500 I have into this stuff.
I'll throw in all the parts I have free if purchased with the truck at $250 but $110 is not gonna happen, sorry.
And I'm not looking to separate the wheels because they are QC and not usable on a standard T4.
Thanks for looking.
Just a quick add here:
Ft T4.1 = $240
front/rear QC axles = $80
Parts (invested well over $150) asking = $65
That's about $500 I have into this stuff.
I'll throw in all the parts I have free if purchased with the truck at $250 but $110 is not gonna happen, sorry.
And I'm not looking to separate the wheels because they are QC and not usable on a standard T4.
Thanks for looking.
Heck with it, I'll even throw in all the NIB wheels and extra pair of QC hubs for $250. I guarantee you won't find a better deal!