Thunder Power TP610 1-6 Cell DC Li-Poly Charger/Balancer
#1
Thunder Power TP610 1-6 Cell DC Li-Poly Charger/Balancer
This is the Thunder Power TP-610C 1-6 Cell Li-Poly Charger/Balancer. Thunder Power RC was the industry first to offer “feedback charge/balancing”, a system of charging where the balancer controls the charger directly for the ultimate in maintenance and safety. With this system, if any cell becomes so out of balance that the balancer cannot keep up, it can throttle back the charger as well as shut it down completely.
The TP-610C is the most capable RC battery charging/balancing maintenance systems available. Capable of up to 6S LiPo and A123 cells, 14 NiCd/MH cells and 6-12V Pb, it can charge, balance, discharge and cycle batteries and report back full data. It is capable of up to 10 amps (80 watts total) for charging.
The TP-610C is an all-in-one charger and discharger with built-in Li-Ion/Li-Po/A123 cell balancer. Capable of charging and discharging Ni-Cd, Ni-MH, Pb, Li-Ion, Li-Po and A123 cells. Perfect for the people looking for a charger that will do everything they need from charging and cycling transmitter and receiver batteries, to charging micro flyer, park flyer and mid-sized aircraft model batteries.
Features
Unique, all-in-one charger and discharger with built-in Li-Ion/Li-Po/A123 cell balancer
Capable of charging and discharging Ni-Cd, Ni-MH, Pb (Lead Acid), Li-Ion, Li-Po and A123 cells
Charges 1-14 cell Ni-Cd/Ni-MH, 1-6 cell Li-Ion/Li-Po/A123 and 6-12V Pb batteries
Selectable (in 0.05V steps) charge rates from 0.25 up to 10.0 amps
Selectable discharge rates up to 2.0 amps
User selectable Li-Ion/Li-Po/A123 charge voltage cutoffs (50% storage, 95% and 100%)
User selectable Li-Ion/Li-Po/A123 discharge voltage cutoffs
Ability to charge more Li-Ion/Li-Po/A123 cells at higher rates than any other charger in its class
Included adapter allows built-in balancer to be used with Thunder Power compatible balance connectors, as well as JST XH balance connectors found on many other brand batteries (Align, E-flite, Parkzone and more)
Specifications:
Type: All-in-one charger and discharger with built-in Li-Ion/Li-Po/A123 cell balancer
Number of Cells: 1-6 LiPo, 1-6 Li-Ion, 1-6 A123, 1-14 Ni-Cd, 1-14 Ni-MH
Charge Rate: Selectable (in 0.05V steps) charge rates from 0.25 up to 10.0 amps
Battery Type: LiPo, Li-Ion, A123, Ni-Cd, Ni-MH, Pb
Discharge: Max discharge current 2.0 Amps
__________________________________________
This is an open boxed unit and used once to make sure it works properly, I already have enough chargers. Was purchased @ $99.99 and will provide receipt to the buyer.
Asking $65.00 shipped (lower 48 states)
Link to product = Click Here
The TP-610C is the most capable RC battery charging/balancing maintenance systems available. Capable of up to 6S LiPo and A123 cells, 14 NiCd/MH cells and 6-12V Pb, it can charge, balance, discharge and cycle batteries and report back full data. It is capable of up to 10 amps (80 watts total) for charging.
The TP-610C is an all-in-one charger and discharger with built-in Li-Ion/Li-Po/A123 cell balancer. Capable of charging and discharging Ni-Cd, Ni-MH, Pb, Li-Ion, Li-Po and A123 cells. Perfect for the people looking for a charger that will do everything they need from charging and cycling transmitter and receiver batteries, to charging micro flyer, park flyer and mid-sized aircraft model batteries.
Features
Unique, all-in-one charger and discharger with built-in Li-Ion/Li-Po/A123 cell balancer
Capable of charging and discharging Ni-Cd, Ni-MH, Pb (Lead Acid), Li-Ion, Li-Po and A123 cells
Charges 1-14 cell Ni-Cd/Ni-MH, 1-6 cell Li-Ion/Li-Po/A123 and 6-12V Pb batteries
Selectable (in 0.05V steps) charge rates from 0.25 up to 10.0 amps
Selectable discharge rates up to 2.0 amps
User selectable Li-Ion/Li-Po/A123 charge voltage cutoffs (50% storage, 95% and 100%)
User selectable Li-Ion/Li-Po/A123 discharge voltage cutoffs
Ability to charge more Li-Ion/Li-Po/A123 cells at higher rates than any other charger in its class
Included adapter allows built-in balancer to be used with Thunder Power compatible balance connectors, as well as JST XH balance connectors found on many other brand batteries (Align, E-flite, Parkzone and more)
Specifications:
Type: All-in-one charger and discharger with built-in Li-Ion/Li-Po/A123 cell balancer
Number of Cells: 1-6 LiPo, 1-6 Li-Ion, 1-6 A123, 1-14 Ni-Cd, 1-14 Ni-MH
Charge Rate: Selectable (in 0.05V steps) charge rates from 0.25 up to 10.0 amps
Battery Type: LiPo, Li-Ion, A123, Ni-Cd, Ni-MH, Pb
Discharge: Max discharge current 2.0 Amps
__________________________________________
This is an open boxed unit and used once to make sure it works properly, I already have enough chargers. Was purchased @ $99.99 and will provide receipt to the buyer.
Asking $65.00 shipped (lower 48 states)
Link to product = Click Here
Last edited by Lucky121; 12-18-2010 at 10:03 AM. Reason: Price