Hudy 1/10 t.c. ULTIMATE setup System - alum case & all acc. (PICS)
#1
Hudy 1/10 t.c. ULTIMATE setup System - alum case & all acc. (PICS)
This is a Hudy Ultimate Set-up System for All 1/10 Touring Cars with ALL accessories:
See the manufacturer's link here : http://www.hudy.net/xhudy/products/p...3&kategoria=64
* THE RC CAR SHOWN IS NOT, I REPEAT NOT INCLUDED
HISTORY:
I've had this set-up system for about 6 months, it's seen a handful of cars/races, and
is in great shape. The lexan is barely warn, mabey a scratch here or there but I cleaned
them all the time and took very good care to even lube the internals of the prisms. Everything
you need to set up you car's suspension is here.
Comes with:
- 1/10 HUDY board with setup decal.
- HUDY 8 piece clear prism alignment set that go on the wheels.
- HUDY TOE-IN gauge that strattles the front or rear prisms for toe-in.
- HUDY non-stepped black aluminum ride height gauge (i perfer this one over the stepped gauge)
- 1 HUDY droop gauge
- 2 HUDY droop standoff's
-all necessary hardware to connect the prisms
- custom fitted aluminum storage case which also holds one 1/10 touring car without
body, on the board, all accessories fit in the case, and foam spaces thing out so nothing moves.
- I may be able to find the instructions, but they're on HUDY's website if not.
I'd like to see $90 + $15 shipping OR B/O, priced to sell quickly. The set-up system alone
without the case is $140 dollars new, and the case cost me $25 at harbor freight.
I WILL NEGOTIATE ON PRICE SO DROP ME AN EMAIL AT [email protected]
I also have a trinity Pro Lathe 3 with MANY accessories, a nice electric tc3, available seperately.
And an INTEGY octane 2 discharge tray for cheap, works like new. And a nice RTR modded Emaxx with 2 sets of 7-cell 3300's
Thanks,
Randy
See the manufacturer's link here : http://www.hudy.net/xhudy/products/p...3&kategoria=64
* THE RC CAR SHOWN IS NOT, I REPEAT NOT INCLUDED
HISTORY:
I've had this set-up system for about 6 months, it's seen a handful of cars/races, and
is in great shape. The lexan is barely warn, mabey a scratch here or there but I cleaned
them all the time and took very good care to even lube the internals of the prisms. Everything
you need to set up you car's suspension is here.
Comes with:
- 1/10 HUDY board with setup decal.
- HUDY 8 piece clear prism alignment set that go on the wheels.
- HUDY TOE-IN gauge that strattles the front or rear prisms for toe-in.
- HUDY non-stepped black aluminum ride height gauge (i perfer this one over the stepped gauge)
- 1 HUDY droop gauge
- 2 HUDY droop standoff's
-all necessary hardware to connect the prisms
- custom fitted aluminum storage case which also holds one 1/10 touring car without
body, on the board, all accessories fit in the case, and foam spaces thing out so nothing moves.
- I may be able to find the instructions, but they're on HUDY's website if not.
I'd like to see $90 + $15 shipping OR B/O, priced to sell quickly. The set-up system alone
without the case is $140 dollars new, and the case cost me $25 at harbor freight.
I WILL NEGOTIATE ON PRICE SO DROP ME AN EMAIL AT [email protected]
I also have a trinity Pro Lathe 3 with MANY accessories, a nice electric tc3, available seperately.
And an INTEGY octane 2 discharge tray for cheap, works like new. And a nice RTR modded Emaxx with 2 sets of 7-cell 3300's
Thanks,
Randy
#3
SOLD TYTY
Last edited by rdandy5875; 07-26-2004 at 06:32 AM.