*** OFNA Hyper 10TTe Roller with upgrades ***
#1
*** OFNA Hyper 10TTe Roller with upgrades ***
*** SOLD ***
Up for sale is my 6week old Hyper 10TTe roller. I have raced it a total of twice, professionally maintained with chassis tape on the bottom, ran indoors on clay ONLY. List of mods and upgrades below... Lipo included, but NO other electronics (esc, servo, rx, motor, pt not included!)...
* OFNA CVA's installed in front & rear (no dogbones)!
* STRC CNC Aluminum Top Plate!
* STRC CNC Aluminum Wheel Hexes (Front & Rear)!
* STRC CNC Aluminum Rear Hub Carriers!
* NEW OFNA Black Ackerman Bar!
* Dynamite Servo Arm!
* Darkside Designs Custom Painted body!
* STRC Delrin Spur Gear!
* 11t, 12t & 13t Pinions included!
* OFNA Stearing Rack BEARINGS!
* Kyosho Alum spacers used in place of stock!
* Traxxas pillow ball spacers used (no ballcups popping off!)!
* JConcepts Bar Codes (Gold) with JC & 1 Foam (7/8 tread left)!
* AVID Bearings installed in place of stock bearings in a couple spots!
* Stainless screws!
* Turnigy 5200/25C Harcase Lipo included (used 10 times and only with TT, always balanced)!
* NIP Front Pillow ball carriers, stock swaybar & misc hardware included...
Truggy is a blast to drive, hate to sell but Xmas is coming and I have an 8yr old daughter that is priority!
$280 shipped, PAYPAL ONLY, Shipped USPS Priority Mail w/Delivery Confirmation
LOWBALLERS need not inquire... I have great feedback and my stuff is clean!
Up for sale is my 6week old Hyper 10TTe roller. I have raced it a total of twice, professionally maintained with chassis tape on the bottom, ran indoors on clay ONLY. List of mods and upgrades below... Lipo included, but NO other electronics (esc, servo, rx, motor, pt not included!)...
* OFNA CVA's installed in front & rear (no dogbones)!
* STRC CNC Aluminum Top Plate!
* STRC CNC Aluminum Wheel Hexes (Front & Rear)!
* STRC CNC Aluminum Rear Hub Carriers!
* NEW OFNA Black Ackerman Bar!
* Dynamite Servo Arm!
* Darkside Designs Custom Painted body!
* STRC Delrin Spur Gear!
* 11t, 12t & 13t Pinions included!
* OFNA Stearing Rack BEARINGS!
* Kyosho Alum spacers used in place of stock!
* Traxxas pillow ball spacers used (no ballcups popping off!)!
* JConcepts Bar Codes (Gold) with JC & 1 Foam (7/8 tread left)!
* AVID Bearings installed in place of stock bearings in a couple spots!
* Stainless screws!
* Turnigy 5200/25C Harcase Lipo included (used 10 times and only with TT, always balanced)!
* NIP Front Pillow ball carriers, stock swaybar & misc hardware included...
Truggy is a blast to drive, hate to sell but Xmas is coming and I have an 8yr old daughter that is priority!
$280 shipped, PAYPAL ONLY, Shipped USPS Priority Mail w/Delivery Confirmation
LOWBALLERS need not inquire... I have great feedback and my stuff is clean!
Last edited by desertracerdad; 10-18-2011 at 04:11 PM.
#2
PM Replied to...
Truggy includes the lipo battery, but no speedo, servo, PT or rx...
Feel free to contact any of the people I have sold equipment to previously, you will not be disappointed!!!
Feel free to contact any of the people I have sold equipment to previously, you will not be disappointed!!!
#3
dang if this was in jan i would buy it from you good deal here!
#4
Bump for a great guy and crazy immaculate maintenance habits! I can definitely vouch for Richard!
#6
Thanks guys!
Just to be clear... The pics I posted above are from yesterday (as shown by the date stamp in the pic). This is the condition of the truck after it has been raced, as you will be receiving it! IT IS THIS CLEAN!!!
XMAS is coming... Who needs a 10TT?????
Just to be clear... The pics I posted above are from yesterday (as shown by the date stamp in the pic). This is the condition of the truck after it has been raced, as you will be receiving it! IT IS THIS CLEAN!!!
XMAS is coming... Who needs a 10TT?????
#7
More pics
More pics with the electronics out of it (lipo IS included)... Taken just minutes ago... The bottom of the chassis is unscratched! It is IMMACULATE!
Last edited by desertracerdad; 10-18-2011 at 04:11 PM.
#8
Price reduction
Price reduced to $280 shipped... I will not go any lower and will shelf it if I cannot get at least the above.
I will be away from the computer for the rest of the day, but interested parties can email me [email protected] ( I can check email via cell phone)...
I will be away from the computer for the rest of the day, but interested parties can email me [email protected] ( I can check email via cell phone)...
#9
Tech Addict
iTrader: (22)
SOLD!!!!!!!!!!1
Price reduced to $280 shipped... I will not go any lower and will shelf it if I cannot get at least the above.
I will be away from the computer for the rest of the day, but interested parties can email me [email protected] ( I can check email via cell phone)...
I will be away from the computer for the rest of the day, but interested parties can email me [email protected] ( I can check email via cell phone)...
#10
#11
darnit goe to movies and miss a great deal