BL Kyo STRR & DST, Losi 8b & XXL, HB LS10, Sav XL, FLM Maxx, GorillaMaxx G3R
#1
BL Kyo STRR & DST, Losi 8b & XXL, HB LS10, Sav XL, FLM Maxx, GorillaMaxx G3R
Dead Thread All Items are sold or no longer available.
GorillaMaxx G3R is no longer for sale. Thanks.
What’s included with the RC listed below:
All the RC listed are as basic rollers: No electronics installed (No ESC, Motor, Servo(s), TX or RX included.) Any questions or offers I will address in order the PM is received.
More Pictures or Info:
Most of the RCs at one time or another have had threads about them. If you looking for a carfax you can search for threads started by Gee at the other forums (rcmonster or Traxxas best bet) and get some history on them.
Prices/Shipping:
Prices do not include shipping which will be the buyers responsibility. If you provide me with your zip code I can give you shipping options and estimates for them. All RC are sold as rollers. The prices listed should allows some room for adjustment. I just picked an amount out of my head. If they seem to high then make and offer. To low jump on it. Multiple item purchases should get better deals/discounts don't you think?
Trades:
My focus has changed to 1/5th scale gassers and currently on the hunt for a Rampage MT. At this point I would consider your blender or toaster in trade.
Other 4 sale threads
Nihms
http://www.rctech.net/forum/r-c-item...ml#post8222614
ESC/Motos
http://www.rctech.net/forum/r-c-item...ml#post8210203
Kyosho ST-RR B1/8th Truggy brushless Conversion: - 250.00 New Price 200.00
Top of the line truggies. Handles excellent, ready for your Mamba Monster and choice of lipos.
More detail pictures here:
http://s212.photobucket.com/albums/c...r%202010/STRR/
Brushless Kyosho DST 1/10th Truggy brushless conversion – 175.00 New Price 125.00Now only 115.00
Converted to Brushless is the Kyosho DST. Custom mount made from 3/8” lexan. Still have the nitro stuff that was pulled from it. The engine has been used and I never seemed to be able to tune it correctly.
More detailed Pictures Here:
http://s212.photobucket.com/albums/c...er%202010/DST/
Hot Bodies LS10 1/10th truggy brushless conversion – 125.00 New Price 100.00Now only 80.00
Plenty of upgrades and mods done to this fellow. Ask for the link to hte thread. Lots of spare parts.
More detail pictures here:
http://s212.photobucket.com/albums/c...r%202010/LS10/
FLM (Extended) E-Maxx setup – SOLD >>>> SOLD >>>>> SOLD
Extended FLM E-Maxx 3905 chassis, 3.3 upgrades. Custom single speed tranny. Tranny is ½ Traxxas case and 3/8” lexan the other. Similar to how the GorillaMaxx G1 Tranny is. Except this was a long winter and I put LED inside the tranny. They leds need resoldered and wired for your setup. 3.3 shafts, knuckles, steering bellcrank upgrade, Traxxas big bore shocks, RPM arms & shock towers, upgraded alum differential cases, gears, trx alum turnbuckles, couple bodies included. Blue 14mm Aluminum rims, masher tires.
GorillaMaxx G3R is no longer for sale. Thanks.
What’s included with the RC listed below:
All the RC listed are as basic rollers: No electronics installed (No ESC, Motor, Servo(s), TX or RX included.) Any questions or offers I will address in order the PM is received.
More Pictures or Info:
Most of the RCs at one time or another have had threads about them. If you looking for a carfax you can search for threads started by Gee at the other forums (rcmonster or Traxxas best bet) and get some history on them.
Prices/Shipping:
Prices do not include shipping which will be the buyers responsibility. If you provide me with your zip code I can give you shipping options and estimates for them. All RC are sold as rollers. The prices listed should allows some room for adjustment. I just picked an amount out of my head. If they seem to high then make and offer. To low jump on it. Multiple item purchases should get better deals/discounts don't you think?
Trades:
My focus has changed to 1/5th scale gassers and currently on the hunt for a Rampage MT. At this point I would consider your blender or toaster in trade.
Other 4 sale threads
Nihms
http://www.rctech.net/forum/r-c-item...ml#post8222614
ESC/Motos
http://www.rctech.net/forum/r-c-item...ml#post8210203
Kyosho ST-RR B1/8th Truggy brushless Conversion: - 250.00 New Price 200.00
Top of the line truggies. Handles excellent, ready for your Mamba Monster and choice of lipos.
More detail pictures here:
http://s212.photobucket.com/albums/c...r%202010/STRR/
Brushless Kyosho DST 1/10th Truggy brushless conversion – 175.00 New Price 125.00Now only 115.00
Converted to Brushless is the Kyosho DST. Custom mount made from 3/8” lexan. Still have the nitro stuff that was pulled from it. The engine has been used and I never seemed to be able to tune it correctly.
More detailed Pictures Here:
http://s212.photobucket.com/albums/c...er%202010/DST/
Hot Bodies LS10 1/10th truggy brushless conversion – 125.00 New Price 100.00Now only 80.00
Plenty of upgrades and mods done to this fellow. Ask for the link to hte thread. Lots of spare parts.
More detail pictures here:
http://s212.photobucket.com/albums/c...r%202010/LS10/
FLM (Extended) E-Maxx setup – SOLD >>>> SOLD >>>>> SOLD
Extended FLM E-Maxx 3905 chassis, 3.3 upgrades. Custom single speed tranny. Tranny is ½ Traxxas case and 3/8” lexan the other. Similar to how the GorillaMaxx G1 Tranny is. Except this was a long winter and I put LED inside the tranny. They leds need resoldered and wired for your setup. 3.3 shafts, knuckles, steering bellcrank upgrade, Traxxas big bore shocks, RPM arms & shock towers, upgraded alum differential cases, gears, trx alum turnbuckles, couple bodies included. Blue 14mm Aluminum rims, masher tires.
Last edited by Geee; 04-04-2011 at 07:36 PM.
#2
Brand New LST2 XXL Brushless project need completed. – 250.00NEW PRICE 270.00 Bought more parts for it
It still is missing some parts but everything that I have collected so far has been new items. Easier to list what is missing to complete as brushless (nitro not listed).
Everything on this except for the Mashers is Brand New.
Steering Servo(s) - single or dual setup your call.
Spur Gear
Slipper Clutch
Brushless Motor Mount
Speed Controller
Motor (pinion)
Battery tray if you chose
UPDATE: I picked up the spur gear/slipper clutch that was needed and the bellcrank parts. The price goes up the more I add to it.
Updated pictures below. Installed the parts that came and added some 40s Mashers on Wabash 23mm rims.
http://s212.photobucket.com/albums/c...10/LST2%20XXL/
It still is missing some parts but everything that I have collected so far has been new items. Easier to list what is missing to complete as brushless (nitro not listed).
Everything on this except for the Mashers is Brand New.
Steering Servo(s) - single or dual setup your call.
Spur Gear
Slipper Clutch
Brushless Motor Mount
Speed Controller
Motor (pinion)
Battery tray if you chose
UPDATE: I picked up the spur gear/slipper clutch that was needed and the bellcrank parts. The price goes up the more I add to it.
Updated pictures below. Installed the parts that came and added some 40s Mashers on Wabash 23mm rims.
http://s212.photobucket.com/albums/c...10/LST2%20XXL/
Last edited by Geee; 01-31-2011 at 11:56 AM.
#3
Losi 8ight B – Brushless Conversion –SOLD>>>>SOLD>>>>>SOLD>>>>>>SOLD>>>>SOLD>>>>>SOLD>> >>>>What else is there to say about an 8ight B other then this thing is sweet with the 1512 Neu listed below on 4s. I need to remove the electronics from this buggy and then I can provide updated pictures. The attachments for this buggy were taken a while ago.
More detailed pictures can be found here:
http://s212.photobucket.com/albums/c...202010/8ightb/
Other Misc: (The following have been listed for sale in separate threads, but are still available)
Integy Alum Steering bellcrank for Savage XL – 20.00
Had it on my XL for a while, will probably work on the other X’s
http://s212.photobucket.com/albums/c...vember%202010/
Dark Soul 23mm Adapter (F&R) for the HPI 5b – KEEPING THEM
Front ones are unused only tried the back ones out for a few tanks.
This is a complete set with the front and rear adapters for the 5b and probably the 5t. Allows you to run the 23mm proline and 23mm on the 5b.
http://s212.photobucket.com/albums/c...vember%202010/
Disclamer:
It has been a while since I have touched some of these RCs. If there are any areas on the rcs that may need to be addressed by the new owner they will be fully disclosed and no monies shall be passed until I am sure you understand what you are getting.
I don’t have any traders feeback here at rctech yet. I have been around the various forums (Traxxas, RC Monster, Nitrotalk, SavageCentral, HPIBaja) for a couple years now. You can check out Gee (I had to use Geee here) on the other forums or ask for my ebay feedback if you’d like. I am paypal verified. I have also dealt with a few of the long time members of rctech outside this forum and can provide references if requested through a pm.
More detailed pictures can be found here:
http://s212.photobucket.com/albums/c...202010/8ightb/
Other Misc: (The following have been listed for sale in separate threads, but are still available)
Integy Alum Steering bellcrank for Savage XL – 20.00
Had it on my XL for a while, will probably work on the other X’s
http://s212.photobucket.com/albums/c...vember%202010/
Dark Soul 23mm Adapter (F&R) for the HPI 5b – KEEPING THEM
Front ones are unused only tried the back ones out for a few tanks.
This is a complete set with the front and rear adapters for the 5b and probably the 5t. Allows you to run the 23mm proline and 23mm on the 5b.
http://s212.photobucket.com/albums/c...vember%202010/
Disclamer:
It has been a while since I have touched some of these RCs. If there are any areas on the rcs that may need to be addressed by the new owner they will be fully disclosed and no monies shall be passed until I am sure you understand what you are getting.
I don’t have any traders feeback here at rctech yet. I have been around the various forums (Traxxas, RC Monster, Nitrotalk, SavageCentral, HPIBaja) for a couple years now. You can check out Gee (I had to use Geee here) on the other forums or ask for my ebay feedback if you’d like. I am paypal verified. I have also dealt with a few of the long time members of rctech outside this forum and can provide references if requested through a pm.
Last edited by Geee; 01-31-2011 at 11:42 AM.
#5
Anyone notice that if you put OBO on your craigs list ad. It get translated to:
"Please lowball me on these items. I have no idea what my stuff is worth and I am so desperate for money." lol
Not the case here at rctech. Thanks for the offers to date. I believe I have PM'ed everyone back.
Some good new.... I should have trader feedback here soon. Bad news... Just not today.
BUMP
"Please lowball me on these items. I have no idea what my stuff is worth and I am so desperate for money." lol
Not the case here at rctech. Thanks for the offers to date. I believe I have PM'ed everyone back.
Some good new.... I should have trader feedback here soon. Bad news... Just not today.
BUMP
#6
Get great deals on more then one item. Buy More Pay Less.
Offer's can be made at anytime. You need not wait until payday to get the ball rolling on having one of these placed in a box and ready to ship your way.
Bump
Again trader feedback is on it way. Until they start rolling in check of GuyJor on ebay. That's me. Look at the Buyer and Seller feedback. All good.
If you would feel safer buying an item and having some protection let me know. When we agree on a final price. I can list the item through my ebay account and we can deal with it through there. I am paypal verified not sure what kind of big deal that is but paypal says it is. Has a line that tell me to give you the link to verify that I am veiriied. I can't put links into my post yet but I can in PMs so PM me.
https://www.paypal.com/us/verified/p...%40yahoo%2ecom
Holy Crap! Yes, I can and a link.... That's paypal verification
Here's ebay user search just search for guyjor
http://shop.ebay.com/member/_W0QQ_dm...cncAUAAAA%253D
You'll have to input the verification code they list and hit search.
Here's my social security #, DL#, Home Address, phone #'s. mother's maiden names, her address and #'s also. Not!
There's some good deals here just waiting for some interaction from you fellows.........
Offer's can be made at anytime. You need not wait until payday to get the ball rolling on having one of these placed in a box and ready to ship your way.
Bump
Again trader feedback is on it way. Until they start rolling in check of GuyJor on ebay. That's me. Look at the Buyer and Seller feedback. All good.
If you would feel safer buying an item and having some protection let me know. When we agree on a final price. I can list the item through my ebay account and we can deal with it through there. I am paypal verified not sure what kind of big deal that is but paypal says it is. Has a line that tell me to give you the link to verify that I am veiriied. I can't put links into my post yet but I can in PMs so PM me.
https://www.paypal.com/us/verified/p...%40yahoo%2ecom
Holy Crap! Yes, I can and a link.... That's paypal verification
Here's ebay user search just search for guyjor
http://shop.ebay.com/member/_W0QQ_dm...cncAUAAAA%253D
You'll have to input the verification code they list and hit search.
Here's my social security #, DL#, Home Address, phone #'s. mother's maiden names, her address and #'s also. Not!
There's some good deals here just waiting for some interaction from you fellows.........
#7
Are you waiting for me to drop the prices because I thought I was suppose to wait until you made an offer?.?.?.?.?
Bump
Other 4 sale threads
Brushless ESC/Motors:
http://www.rctech.net/forum/r-c-item...esc-servo.html
Lipos/Nihms
http://www.rctech.net/forum/r-c-item...ml#post8210193
Shocks/ Revo Bling
http://www.rctech.net/forum/r-c-item...eve-bling.html
Bump
Other 4 sale threads
Brushless ESC/Motors:
http://www.rctech.net/forum/r-c-item...esc-servo.html
Lipos/Nihms
http://www.rctech.net/forum/r-c-item...ml#post8210193
Shocks/ Revo Bling
http://www.rctech.net/forum/r-c-item...eve-bling.html
#11
Tech Fanatic
iTrader: (75)
If I remember right, difnt you have the stock axles on your g3r? If so I have a set of unlimited engineering 8mm Cvd's with an extra set of 14mm hexes I could sale to you.
Let me know if your interested, I sale them for what I paid for them. They're not new but they're straight and in great condition. I can send you pictures.
Email me at:
[email protected]
Justin
Let me know if your interested, I sale them for what I paid for them. They're not new but they're straight and in great condition. I can send you pictures.
Email me at:
[email protected]
Justin
#13
Tech Rookie
Interested in XXl !
Do you still have it ??
Pm sent.
Do you still have it ??
Pm sent.
#14
G3R
I'm also interested in the G3R. Thanks.