Savage Part out of upgraded trucks
10-31-2010, 09:59 AM
#1
Savage Part out of upgraded trucks 3 Picco .28 motors
Hey guys this is A big part out im doing. Tore my two trucks apart, cleaned it all up, and now its going up for sale. All prices do not include shipping, but i will only charge what i pay. As always the more you buy, the easier it is for me to deal, and dont be afraid to make REASONABLE offers.
Picco .28 with nova cooling head. Has two run old max life clutch shoes installed with mugen 1.0 springs. I am unsure exactly how much fuel has been thru it, but it is a very strong runner. I ran byrons 30% with an mc-8 plug. It pulls the wheels up no problems. Also includes motor saver airfilter.
$150
PRC Nitro Motor Plate and braces
$20
PRC112 Mid tank plate,
$20
Custom Cut Carbon fiber bulk head plates with aluminum braces
$25
Custom Cut Carbon Fiber Bulk head braces
$15
Custom Cut Carbon fiber Rush box mount, and rush box
$10
Wings
$7 dollars a piece
Three speed tranny, steel spur gear, red fiber brakes
$45
Cen Diffs, modded for savage with XL/Flux diff cups. These have ran great. Only issue i know of, is one screw wont go in. i had a head snap off and had to drill it out and got a little off i guess. so 7 of 8 screws work. never had issues with it. teeth are all great. comes set up as shown with towers and all.
$45 for pair
Dog bones and drive shafts. one is a front FLM drive shaft, and the rest are stockers.
FLM front center- $4
Stockers - $2 a piece or free with any other purchase
skid plates, and Shock towers
$2 per tower
$5 with no wheelie bar
Steering knuckles $4 a set with no bearings $6 with bearings
Roll cage modded to work with extended chassis using a high body post $5
Bellcrank assembly new in plastic $4
Picco .28 with nova cooling head. Has two run old max life clutch shoes installed with mugen 1.0 springs. I am unsure exactly how much fuel has been thru it, but it is a very strong runner. I ran byrons 30% with an mc-8 plug. It pulls the wheels up no problems. Also includes motor saver airfilter.
$150
PRC Nitro Motor Plate and braces
$20
PRC112 Mid tank plate,
$20
Custom Cut Carbon fiber bulk head plates with aluminum braces
$25
Custom Cut Carbon Fiber Bulk head braces
$15
Custom Cut Carbon fiber Rush box mount, and rush box
$10
Wings
$7 dollars a piece
Three speed tranny, steel spur gear, red fiber brakes
$45
Cen Diffs, modded for savage with XL/Flux diff cups. These have ran great. Only issue i know of, is one screw wont go in. i had a head snap off and had to drill it out and got a little off i guess. so 7 of 8 screws work. never had issues with it. teeth are all great. comes set up as shown with towers and all.
$45 for pair
Dog bones and drive shafts. one is a front FLM drive shaft, and the rest are stockers.
FLM front center- $4
Stockers - $2 a piece or free with any other purchase
skid plates, and Shock towers
$2 per tower
$5 with no wheelie bar
Steering knuckles $4 a set with no bearings $6 with bearings
Roll cage modded to work with extended chassis using a high body post $5
Bellcrank assembly new in plastic $4
Last edited by 88gtanotchback; 11-13-2010 at 11:18 PM. Reason: updated
10-31-2010, 01:20 PM
#2
replied to pms and updated lists.
10-31-2010, 01:40 PM
#3
hey man im looking for bearings for the servo saver towers... have anything like that? pm me broski 
10-31-2010, 03:34 PM
#5
thanks core, i tried to price it all to go quick.
10-31-2010, 08:56 PM
#6
updated and replied again, thanks for all the interest!
11-01-2010, 08:13 PM
#7
updated whats gone again, cleaned it up fellas. pms replied as well!
11-02-2010, 04:42 AM
#8
bump
11-02-2010, 07:25 PM
#9
pms replied and updated it again.
11-03-2010, 08:50 PM
#10
updated whats sold again, replied
11-04-2010, 07:38 PM
#11
updated list again.
11-06-2010, 01:00 PM
#12
bump it
11-07-2010, 02:03 PM
#13
bump for updated thread
11-08-2010, 06:13 PM
#14
bump
11-09-2010, 06:16 PM
#15
bump
