Electric Converted TEN-T 4x4 SCT Roller W/motor
09-30-2010, 03:02 AM
#1
Electric Converted TEN-T 4x4 SCT Roller W/motor
I am selling my fully converted Ten-T SCT. It is in great condition and comes with a few replacement parts and a set of new bearings. It has a Lektron 2200kv motor and micro brake servo. It does NOT come with an ESC/Steering Servo/Receiver/Batteries or transponder.
This conversion has held up great after all the conversion work. It has a Losi 45t Steel spur gear from the 8ight (mod 1) that I cut out and made to fit the Ten-T diff case. Also a Tekno Elektri-Clutch matched with a great brake micro brake servo working the rear brake assy (front was unnecessary). I also made a very thin spring steel shield for the spur gear so it could not make contact with the battery. It's a Tekno 3 strap battery tray mounted up front for optimum balance. It has Traxxas 4x4 front and rear bumpers (easy to find) that fit the truck very well and are very durable. It has the hard spring set for better handling with this heavier than stock truck. It has Tekno hexes and Pro-line zero off-set wheels that make it Roar legal width. When Losi comes out with a new longer chassis for this, it will be unstoppable!
It also comes with a fairly new body (image below)
This is a SERIOUS 4x4 race truck and it handles very well.
I am looking to focus on 1/8th buggy and so I will be selling this roller w/motor for $300. PM questions... NO Trades.
This conversion has held up great after all the conversion work. It has a Losi 45t Steel spur gear from the 8ight (mod 1) that I cut out and made to fit the Ten-T diff case. Also a Tekno Elektri-Clutch matched with a great brake micro brake servo working the rear brake assy (front was unnecessary). I also made a very thin spring steel shield for the spur gear so it could not make contact with the battery. It's a Tekno 3 strap battery tray mounted up front for optimum balance. It has Traxxas 4x4 front and rear bumpers (easy to find) that fit the truck very well and are very durable. It has the hard spring set for better handling with this heavier than stock truck. It has Tekno hexes and Pro-line zero off-set wheels that make it Roar legal width. When Losi comes out with a new longer chassis for this, it will be unstoppable!
It also comes with a fairly new body (image below)
This is a SERIOUS 4x4 race truck and it handles very well.
I am looking to focus on 1/8th buggy and so I will be selling this roller w/motor for $300. PM questions... NO Trades.
Last edited by Marzac2; 11-02-2010 at 12:33 PM. Reason: price reduction
Trades.....
10-02-2010, 07:29 PM
#9
I thought that truck looked familiar. I pitted right next to you last weekend at Barona. Wish I knew that was a ten-t sct conversion. I have been looking at doing that. Seriously hoping Losi comes out with a 4x4 sct soon or I am going to be forced to build this Hyper I have sitting in the box.
Free bump for you.
10-12-2010, 07:49 AM
#15
Conversions are sweet!!! I've converted my revo 3.3 and i smoke all my friends with utter ease. I think a Lst2 conversion is next. Nice car by the way, good luck selling!