HPI Nitro RS4 3 EVO+ RTR w/Greddy 350Z Body A6
#1
HPI Nitro RS4 3 EVO+ RTR w/Greddy 350Z Body A6
Im selling a used HPI RS4 paid 314.00 brand new only ran about a half gallon of fuel thru engine never went above 190.Just put on a brand new chassis after hitting a curb and bending the other one good.Willing to sell for 200.00Link to pics below
http://s464.photobucket.com/albums/r...20Nitro%20RS4/
specs:
FEATURES: Chassis: 0.098" (2.5mm) 6061 aluminum, purple in color
Drive: Four wheel shaft drive
Engine: Nitro Star G3.0 3.0cc (.18 cu in) 2.2hp with Roto Start
can be bump started in racing applications) ABC cylinder and liner
construction-"A"luminum piston,"B"rass cylinder liner that is
"C"hrome plated, lightweight aluminum con rod, 2 needle 6.5mm
rotary carburetor, 2 stage air filter, HPI Roto-Start electric
starter
Exhaust: Dual chamber aluminum tuned pipe with tube header, black in
color
Radio: Two channel 27MHz AM with steering and throttle trims, dual
rate for steering and charge jack for optional NiCd battery
Servos: Two standard size and torque
Fuel Tank: 2.53oz (75cc), flip top cap
Clutch: 2-shoe
Transmission: Two-speed, adjustable
Ball Bearings: 18 rubber sealed
Shocks: Four oil-filled, with coil-over spring
Main Gear: 47 and 43 tooth composite construction main gears
Clutch bell: 22 teeth and 18 teeth gears that thread onto clutch bell
Gearbox: Sealed, front and rear
Differentials: Sealed, with metal bevel gears, limited slip front
differential
Brakes: Single disc, fiber construction
Tires: D compound X-pattern 1.02" (26mm) wide, 2.5" (65mm) diameter
Wheels: Tuner style
Body: Pre-painted and trimmed with rear wing and decals applied
Bumper: Front foam
Suspension: Four wheel independent
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bellcrank
Servo Saver: Included
http://s464.photobucket.com/albums/r...20Nitro%20RS4/
specs:
FEATURES: Chassis: 0.098" (2.5mm) 6061 aluminum, purple in color
Drive: Four wheel shaft drive
Engine: Nitro Star G3.0 3.0cc (.18 cu in) 2.2hp with Roto Start
can be bump started in racing applications) ABC cylinder and liner
construction-"A"luminum piston,"B"rass cylinder liner that is
"C"hrome plated, lightweight aluminum con rod, 2 needle 6.5mm
rotary carburetor, 2 stage air filter, HPI Roto-Start electric
starter
Exhaust: Dual chamber aluminum tuned pipe with tube header, black in
color
Radio: Two channel 27MHz AM with steering and throttle trims, dual
rate for steering and charge jack for optional NiCd battery
Servos: Two standard size and torque
Fuel Tank: 2.53oz (75cc), flip top cap
Clutch: 2-shoe
Transmission: Two-speed, adjustable
Ball Bearings: 18 rubber sealed
Shocks: Four oil-filled, with coil-over spring
Main Gear: 47 and 43 tooth composite construction main gears
Clutch bell: 22 teeth and 18 teeth gears that thread onto clutch bell
Gearbox: Sealed, front and rear
Differentials: Sealed, with metal bevel gears, limited slip front
differential
Brakes: Single disc, fiber construction
Tires: D compound X-pattern 1.02" (26mm) wide, 2.5" (65mm) diameter
Wheels: Tuner style
Body: Pre-painted and trimmed with rear wing and decals applied
Bumper: Front foam
Suspension: Four wheel independent
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bellcrank
Servo Saver: Included
#2
bump
#3
anyone?
#4
morning bump!
#5
any offers?
#6
200 or best offer
#7
sold