FS Hot Bodies D8 Roller w/parts!
#1
FS Hot Bodies D8 Roller w/parts!
Hey guys, so with my senior year of college about to begin I have decided to take a break from nitro because I will be taking 21 credit hours this semester.. aka no time to race
So I have my Hot Bodies D8 roller for sale.. I take care of my buggy and rebuild/replace parts as needed. The diffs are one qualifier and one 20 min main old.. the diffs are 5-5-3. The shocks are the same, with 30f 30r. The diff bearings are all two weekends old and smooth.. the diffs are shimmed properly so no worries there. I replaced all the bearings in the hub carriers before the main with protek metal shield ones.. the a-arms are one weekend old.. I still have the all my old ones as none of them broke but they get a little slop in them and I rather replace them. I also tore down my servo saver before the last main I was in and cleaned all the bearings.. I have cvd boots on all the outdrives and I pack them with lithium grease to help prolong their life. Ah, and all the outdrives were replaced last weekend with new ones.. I have all the old ones and they are in fine working order just not perfect. The shocks are all fresh, new bladders, new 1.4 pistons, new o-rings and the shafts are all straight/smooth.
I just got back from the Wiregrass nationals, that is why so many of the parts are new.. went ahead and replaced a lot of them even if they were ok.
As for parts.. new unless otherwise noted.
1. 67515 big bore shock maintenance
2. 67404 joint rebuild kit
3. 2 new a arms and 4 used ones that are still in fine working order.
4. 1 protek 8x14x4mm bearing for the hubs
5. (2) full center diff housing set ups.. with brakes, pads,
6. turnbuckle set.
7. a complete steering set up.. ackerman, servo saver, bearings, spring, steering posts, etc.
8. 3 used outdrives, 1 new 91mm driveshaft
9. (2) complete front or rear diff housings.
10. set of front hub carriers.
11. complete hinge pin set up for the front and rear..
I'm sure I forgot a few things and I will edit it as they come up.. I have one stock body and one bulldog body.. both are in decent shape. I loved this buggy but I won't be having time to race/maintain a buggy like I want to so I have to sell it, hopefully the updated D8 will be out by the time summer rolls around and I will buy that.
You will not be dissapointed with this buggy.. please no trades as I don't have time for any racing this coming semester. I plan on saving the money and putting it towards another buggy when summer comes. I would like to get $275 for the roller and all my parts for it.. shoot me offers, I won't blast you for offering!
Thanks for looking! Pm me with any questions or if you want more photos of something specific.
So I have my Hot Bodies D8 roller for sale.. I take care of my buggy and rebuild/replace parts as needed. The diffs are one qualifier and one 20 min main old.. the diffs are 5-5-3. The shocks are the same, with 30f 30r. The diff bearings are all two weekends old and smooth.. the diffs are shimmed properly so no worries there. I replaced all the bearings in the hub carriers before the main with protek metal shield ones.. the a-arms are one weekend old.. I still have the all my old ones as none of them broke but they get a little slop in them and I rather replace them. I also tore down my servo saver before the last main I was in and cleaned all the bearings.. I have cvd boots on all the outdrives and I pack them with lithium grease to help prolong their life. Ah, and all the outdrives were replaced last weekend with new ones.. I have all the old ones and they are in fine working order just not perfect. The shocks are all fresh, new bladders, new 1.4 pistons, new o-rings and the shafts are all straight/smooth.
I just got back from the Wiregrass nationals, that is why so many of the parts are new.. went ahead and replaced a lot of them even if they were ok.
As for parts.. new unless otherwise noted.
1. 67515 big bore shock maintenance
2. 67404 joint rebuild kit
3. 2 new a arms and 4 used ones that are still in fine working order.
4. 1 protek 8x14x4mm bearing for the hubs
5. (2) full center diff housing set ups.. with brakes, pads,
6. turnbuckle set.
7. a complete steering set up.. ackerman, servo saver, bearings, spring, steering posts, etc.
8. 3 used outdrives, 1 new 91mm driveshaft
9. (2) complete front or rear diff housings.
10. set of front hub carriers.
11. complete hinge pin set up for the front and rear..
I'm sure I forgot a few things and I will edit it as they come up.. I have one stock body and one bulldog body.. both are in decent shape. I loved this buggy but I won't be having time to race/maintain a buggy like I want to so I have to sell it, hopefully the updated D8 will be out by the time summer rolls around and I will buy that.
You will not be dissapointed with this buggy.. please no trades as I don't have time for any racing this coming semester. I plan on saving the money and putting it towards another buggy when summer comes. I would like to get $275 for the roller and all my parts for it.. shoot me offers, I won't blast you for offering!
Thanks for looking! Pm me with any questions or if you want more photos of something specific.
#8
are you in Phx now?
#13
Bump!
Hey fellas, school is in session and I finally have time to do other things.
$175 takes the roller..
However I'm thinking about going electric this year.. I will trade for any 1/10 buggy or 4wd sct. I have a full nitro set up with a Werks B5 that runs like a bat out of hell... Let me know!!
Thanks
$175 takes the roller..
However I'm thinking about going electric this year.. I will trade for any 1/10 buggy or 4wd sct. I have a full nitro set up with a Werks B5 that runs like a bat out of hell... Let me know!!
Thanks
#14
trade?
Interested in a Team Academy Gv2 pro.I will include all manuals and tires.I bought it in december 09 and ran 3-4 times.It is a 1/10 scale buggy.
#15
I will ship the buggy free if trading is what you will do!!