ElectriFly Triton 2 EQ $100
08-26-2010, 05:34 PM
#1
ElectriFly Triton 2 EQ $100
Used for about two months but i am got to get rid of some of my rc stuff so this charger has to go. I paid close to 200 for this charger and i must say it was worth every penny. This is a steal for someone.
Setting new standards in charger performance!
Everything that makes the Triton2 great is on the Triton2 EQ -- and then some! In addition to 10 battery memories and the ability to monitor heat-sensitive batteries with the optional Thermal Probe (GPMM3151), the Triton2 EQ features a built-in LiPo balancer, the convenience of a built-in AC power supply, compatibility with the latest battery technologies such as LiFe (A123) cells, an adjustable-angle LCD and an increased charge current of up to 8 amps!
Features
For LiPo, Li-Ion, LiFe (A123) NiCd, NiMH, and Pb batteries
Includes built-in balancer for up to 6S packs
Fast charge up to 8 amps
Built-in balancing for 1-6S LiPo, Li-Ion, or LiFe (A123) cells (ElectriFly and FlightPower adapters included)
0.1-8.0A adjustable charge current
Precision peak detection with adjustable sensitivity for NiCd and NiMH batts
Constant current / constant voltage charge method for Pb and lithiums
Temperature sensing capabilities (GPMM3151 Thermal Probe available separately)
Top-off charge feature fully charges NiMHs without overheating
0.1-3.0A adjustable discharge current
Adjustable discharge cutoff voltages for NiCd/MH, preset voltages for Pb and lithiums
Perform 1 to 10 cycles (NiCd/MH only), and recall all data
Configure up to 10 batteries in memory for instant, easy recall and charger set-up
Banana plugs on DC input, and includes mating alligator clips
Displays input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time, data for 10 cycles, errors, and individual lithium cell voltages
Audible sound cues aid in programming and notification of function changes.
Warning messages for improper input voltage, poor connections, unsuitable battery condition, reverse polarity on output
Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer, current overload and reverse polarity protection
Setting new standards in charger performance!
Everything that makes the Triton2 great is on the Triton2 EQ -- and then some! In addition to 10 battery memories and the ability to monitor heat-sensitive batteries with the optional Thermal Probe (GPMM3151), the Triton2 EQ features a built-in LiPo balancer, the convenience of a built-in AC power supply, compatibility with the latest battery technologies such as LiFe (A123) cells, an adjustable-angle LCD and an increased charge current of up to 8 amps!
Features
For LiPo, Li-Ion, LiFe (A123) NiCd, NiMH, and Pb batteries
Includes built-in balancer for up to 6S packs
Fast charge up to 8 amps
Built-in balancing for 1-6S LiPo, Li-Ion, or LiFe (A123) cells (ElectriFly and FlightPower adapters included)
0.1-8.0A adjustable charge current
Precision peak detection with adjustable sensitivity for NiCd and NiMH batts
Constant current / constant voltage charge method for Pb and lithiums
Temperature sensing capabilities (GPMM3151 Thermal Probe available separately)
Top-off charge feature fully charges NiMHs without overheating
0.1-3.0A adjustable discharge current
Adjustable discharge cutoff voltages for NiCd/MH, preset voltages for Pb and lithiums
Perform 1 to 10 cycles (NiCd/MH only), and recall all data
Configure up to 10 batteries in memory for instant, easy recall and charger set-up
Banana plugs on DC input, and includes mating alligator clips
Displays input and output volts, peak volts, average discharge volts, charge and discharge capacity, currents and time, data for 10 cycles, errors, and individual lithium cell voltages
Audible sound cues aid in programming and notification of function changes.
Warning messages for improper input voltage, poor connections, unsuitable battery condition, reverse polarity on output
Safety features include cool-off time delay, maximum NiMH charge input, fast charge safety timer, current overload and reverse polarity protection
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
