FS:Emax 30A RC Car Programmable Brushless ESC
07-10-2010, 11:29 AM
#1
FS:Emax 30A RC Car Programmable Brushless System
Got these still in box ready to be shipped $120.00ea system Got 10 of them No trade or low baller offers please Will sell with a Associated LRP Eraser sport 10.5T, Eraser sport 13.5T, Eraser sport 15.5T, Ultimo drift Type 1
Features
*Emax 30A RC Car Programmable Brushless ESC
*Full protection features including low voltage, over-heat, throttle signal loss, startup protection and self-check.
*Compatible with sensor-free brushless motors.
*Excellent startup performance, great throttle linear and quick throttle response.
*Support highest motor speed 240,000RPM (2 poles), 80,000RPM (6 poles) and 40,000RPM (12 poles).
*The parameters of ESC can be configured via pressing the keys.
*System can automatically detect throttle neutral point and neutral range is adjustable.
*Three working modes can meet different requirements.
*4 steps of maximum reverse force adjustment, 5 steps of maximum start force adjustment.
*3 steps of maximum brake force adjustment, 5 steps of drag brake force adjustment, 4 steps of initial brake force adjustment.
*Support 1 cell operation (min voltage: 3V, only available for EMAX-6A and EMAX-10A).
Note: For EMAX-150A and EMAX-120A-HV, an UBEC or individual battery pack is required to power the receiver and servos, and the red line (+5V) in 3 pin must be pulled out!
Specifications
*Continuous current : 30A
*Input Voltage : 2–3 s Lipo, 4-9s NI-Mh/Ni-Cd
*BEC (Battery Elimination Circuit) Output : linear mode BEC2A
*Size : 45mm X 32mm X 20mm (length*width*height)
*Weight : 50g
Contents
* Emax 30A RC Car Programmable Brushless ESC
* User Manual
Features
*Emax 30A RC Car Programmable Brushless ESC
*Full protection features including low voltage, over-heat, throttle signal loss, startup protection and self-check.
*Compatible with sensor-free brushless motors.
*Excellent startup performance, great throttle linear and quick throttle response.
*Support highest motor speed 240,000RPM (2 poles), 80,000RPM (6 poles) and 40,000RPM (12 poles).
*The parameters of ESC can be configured via pressing the keys.
*System can automatically detect throttle neutral point and neutral range is adjustable.
*Three working modes can meet different requirements.
*4 steps of maximum reverse force adjustment, 5 steps of maximum start force adjustment.
*3 steps of maximum brake force adjustment, 5 steps of drag brake force adjustment, 4 steps of initial brake force adjustment.
*Support 1 cell operation (min voltage: 3V, only available for EMAX-6A and EMAX-10A).
Note: For EMAX-150A and EMAX-120A-HV, an UBEC or individual battery pack is required to power the receiver and servos, and the red line (+5V) in 3 pin must be pulled out!
Specifications
*Continuous current : 30A
*Input Voltage : 2–3 s Lipo, 4-9s NI-Mh/Ni-Cd
*BEC (Battery Elimination Circuit) Output : linear mode BEC2A
*Size : 45mm X 32mm X 20mm (length*width*height)
*Weight : 50g
Contents
* Emax 30A RC Car Programmable Brushless ESC
* User Manual
Last edited by Curtis williams; 07-12-2010 at 02:19 PM.
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
