TEAM CHECKPOINT TC 1030
#1
TEAM CHECKPOINT TC 1030
USED LESS THEN 4 TIMES LIKE NEW COMES WITH HYPER FLAME SKIN
SOLD SHIPPED TO THE LOWER 48 STATES
FEATURES: Charges 1-10 cell NiCd and NiMH cells (1.2-12.0V) and 1-4 LiPo or Li-Ion cells (3.6-14.8V) Five charge methods: Linear Reflex Pulse 3-step and 4-step with a top-off function that fully charges NiMHs without over heating 0.1-10.0A Linear Discharge Current and custom pulsed 20A and 30A Discharge currents for top level pack conditioning Dead-Short mode for careful deep discharging 0-25mV peak sensitivity for NiCd and NiMHs including 1mV and 2mV options Thermal cutoff (requires optional Pro Temperature Sensor TCPP9101) Three motor break-in modes; single step four step and motor test mode voltage adjustable from 1.0-8.0V timer adjustable from 1-180 minutes can also be used for comm lathes and tire warmers Blue LCD backlight for easy viewing in almost any light condition Two cooling fans Five year limited warrantyINCLUDES: Team Checkpoint Computerized Pro Battery Charger and Discharger with two charge adapters-alligator clips and Deans Ultra Male plug two alligator clips and instruction manualREQUIRES: 12V DC power from a Power Supply automotive battery or Hobbico 12V Power Supply (HCAP0250) or Rivergate 15A DC Bulldog Power Supply (RHCP2015) To achieve absolute maximum output power capabilities the DC power source must be capable of delivering at least 15A while maintaining 12V DC (although 12.5A is enough for most functions).SPECS: Dimensions: 5.5 x 1.8 x 5.9 (140 x 46 x 150mm) Weight: 24.5oz (695g) Input Voltage: 11-15V DC Battery Types: 1-10 cell NiCd and NiMH cells (1.2-12.0V) and 1-4 LiPo or Li-Ion cells (3.6-14.8V) Fast Charge Current: 0.1-10.0A Fast Charge Methods: Linear Reflex Pulse 3-step and 4-step Fast Charge Termination: Peak Detection for NiCd and NiMH Constant Current/Constant Voltage (CC/CV) for LiPo/Ion Peak Sensitivity: 0-25mV adjustable (including 1mV 2mV) Trickle Charge Current: 0-500mA (NiCd/NiMH only) Top-off Charge: 0-1000mA (NiMH only) Max Discharge Power: 90 watts Discharge Current: 0.1-10.0A Linear Discharge Current Custom pulsed 20A and 30A w/dead short mode Discharge Cutoff Voltage: 0.1-1.1V per cell (NiCd and NiMH) 2.5-3.7V per cell (LiPo/Ion) Temperature Cut-off Range: 50-132 F (10-55 C) Cycle Count: 1-10 cycles (NiCd/NiMH only) Battery Memories: 10 Display Type: 8x21 graphing LCD w/Blue backlight Motor Break-In: Single step four step and motor test voltage adjustable from 1.0-8.0V timer adjustable from 1-180 minutes maintains 20A @ 1.5V
SOLD SHIPPED TO THE LOWER 48 STATES
FEATURES: Charges 1-10 cell NiCd and NiMH cells (1.2-12.0V) and 1-4 LiPo or Li-Ion cells (3.6-14.8V) Five charge methods: Linear Reflex Pulse 3-step and 4-step with a top-off function that fully charges NiMHs without over heating 0.1-10.0A Linear Discharge Current and custom pulsed 20A and 30A Discharge currents for top level pack conditioning Dead-Short mode for careful deep discharging 0-25mV peak sensitivity for NiCd and NiMHs including 1mV and 2mV options Thermal cutoff (requires optional Pro Temperature Sensor TCPP9101) Three motor break-in modes; single step four step and motor test mode voltage adjustable from 1.0-8.0V timer adjustable from 1-180 minutes can also be used for comm lathes and tire warmers Blue LCD backlight for easy viewing in almost any light condition Two cooling fans Five year limited warrantyINCLUDES: Team Checkpoint Computerized Pro Battery Charger and Discharger with two charge adapters-alligator clips and Deans Ultra Male plug two alligator clips and instruction manualREQUIRES: 12V DC power from a Power Supply automotive battery or Hobbico 12V Power Supply (HCAP0250) or Rivergate 15A DC Bulldog Power Supply (RHCP2015) To achieve absolute maximum output power capabilities the DC power source must be capable of delivering at least 15A while maintaining 12V DC (although 12.5A is enough for most functions).SPECS: Dimensions: 5.5 x 1.8 x 5.9 (140 x 46 x 150mm) Weight: 24.5oz (695g) Input Voltage: 11-15V DC Battery Types: 1-10 cell NiCd and NiMH cells (1.2-12.0V) and 1-4 LiPo or Li-Ion cells (3.6-14.8V) Fast Charge Current: 0.1-10.0A Fast Charge Methods: Linear Reflex Pulse 3-step and 4-step Fast Charge Termination: Peak Detection for NiCd and NiMH Constant Current/Constant Voltage (CC/CV) for LiPo/Ion Peak Sensitivity: 0-25mV adjustable (including 1mV 2mV) Trickle Charge Current: 0-500mA (NiCd/NiMH only) Top-off Charge: 0-1000mA (NiMH only) Max Discharge Power: 90 watts Discharge Current: 0.1-10.0A Linear Discharge Current Custom pulsed 20A and 30A w/dead short mode Discharge Cutoff Voltage: 0.1-1.1V per cell (NiCd and NiMH) 2.5-3.7V per cell (LiPo/Ion) Temperature Cut-off Range: 50-132 F (10-55 C) Cycle Count: 1-10 cycles (NiCd/NiMH only) Battery Memories: 10 Display Type: 8x21 graphing LCD w/Blue backlight Motor Break-In: Single step four step and motor test voltage adjustable from 1.0-8.0V timer adjustable from 1-180 minutes maintains 20A @ 1.5V
Last edited by entitymugenmtx; 03-24-2010 at 12:57 AM.
#8
Tech Rookie
interested in charger
I sent you a PM about your charger.