FUTABA BLOWOUT SALE
01-19-2010, 11:01 AM
#1
****FUTABA BLOWOUT SALE**** (4pk) BLS Servos!
NEW 4PK REPLACEMENT FROM FUTABA SERVICES W/ used 604FS, EXTRA TRINITY 23OO PACK, AND ALUMINUM 4PK CARRYING CASE- $425 SOLD!
The Futaba 4PK was only just released and drew a lot of attention from racers due to its rather unique look. The 4PK’s contemporary styling is not only unique, it’s extremely well balanced and ergonomic and because the transmitter only weighs 1.5 pounds, you won’t worry about hand fatigue all the way through a grueling main. Besides the repositionable wheel, you can also adjust the trigger location to fit your finger and programming pluses include 40-model memory, 12-character naming, super-sensitive 2048 resolution and a 4th channel that’s ideal for adjusting front and rear brake bias in monster trucks. And here’s the best part: the 4PK was designed from the beginning as a spread spectrum system, which means the 2.4GHz module is built in, a state-of-the-art receiver is included, and all of the incredible advantages of FASST system technology are at your command!
Features
* Much consideration went into the design of the 4PK’s grip, which is slightly thicker to accommodate larger hands. Besides being lighter, the transmitter’s weight is well balanced for added comfort.
* Achieve perfect “feel” in seconds with the Advanced Positioning Adapter. You can drop the wheel down, move it left or right, even change the angle – a feature many drivers have requested.
* The trigger position can also be shifted by as much as 7mm. This allows you to customize the radio for sharper response based on finger size.
* The redesigned keypad features a large 4-direction jog button for quick access and scrolling. Important functions can be assigned to buttons on the wheel housing to keep them within easy reach.
* Not only is the backlit LCD screen large enough for easy reading without eye strain, it’s also angled for instant viewing without having to tilt the transmitter.
* Because the 4PK was engineered from the beginning for 2.4GHz modulation, there’s no long, unwieldy antenna. Instead, the antenna is shorter and lighter in weight, folds down for easy storage, and pivots for optimum reception.
* No NiCd battery here – the 4PK comes with an 1700mAh NiMH pack that’s comparable in size, but with almost twice the capacity. That means about TWO HOURS of operation on a single charge – enough for the longest of mains and maybe even an entire weekend of racing!
* The included R604FS receiver features Dual Antenna Diversity (DAD) for reliability and security. Its compact size (1.54 x 1.02 x .55 inches) and weight (0.49 ounces) lets you use it in the tightest installations.
* “New Driver”, “Race-Ready”, “Expert” and “Big Car” menus that add functions based on driving skill level and experience
* Throttle Mode Select, for selecting acceleration/brake servo neutral points between 70/30 for nitro or 50/50 for electrics
* Vibrating alert system
* “Direct Select” single-button access to eight preassigned functions
* Navigation Lap Timer that sounds when target lap time is exceeded
* Servo Display Screen shows set-ups/mixes for individual servos (Expert Menu)
* Throttle programming options, including 5-point curve, Expo and VTR
4PK Specifications:
* 40-model memory
* 10-character model naming
* 4th channel for brake bias, throttle adjustments, etc.
* 2 programmable mixes
* Assignable button, trims and dials
* Digital trims and dials
* Advanced Positioning Adapter (APA)
* Adjustable trigger location
* Backlit 128 x 64 white LCD screen with adjustable contrast
* Subtrims, servo reversing and EPA on all channels
* Fail safe
* DSC (Direct Servo Control)
* Exponential & Adjustable Servo Speed (Steering/Throttle)
* Up/Down, Lap & Systems timers
* 100-lap memory
* ATL (Electronic & Mechanical)
* Traction Control/Acceleration Rate
* ABS braking system
* Boat mixing
* Idle-Up
* Tx NiMH and Dual-Output Charger
2 Used Futaba R604FS 2.4Ghz FASST 4-Channel Receiver (4PK)-$80 each SOLD
This is the Futaba 2.4GHz R604FS 4-Channel Receiver with FASST (Futaba Advanced Spread Spectrum Technology) Technology for use with Futaba 4PK 2.4GHz FASST transmitter or the Futaba 3PK radio with FASST transmitter module systems. Unlike less reliable single antenna receivers, Futaba employs an antenna diversity system-one internal and one external antenna on the R604FS receiver to eliminate dead spots anywhere on the track
The included R604FS receiver features Dual Antenna Diversity (DAD) for reliability and security. Its compact size (1.54 x 1.02 x 0.55 inches) and weight (0.49 ounces) lets you use it in the tightest installations.
3 Used Futaba S9351 Digital High Torque Servo- $60 each
This is the S9351 Digital Servo w/Two Ball Bearings for Car and Boat Use and Comes with "J" Connector Pre-Installed. Metal case acts as a Heat Sink to reduce Heat and is designed to be Water and Dust Proof.
Features:
* Comes with Heavy Duty wiring that can handle Higher Current Loads.
* New Metal casing which helps to dissipate heat.
* Coreless Motor
* Dual Ball Bearing Output Shaft
* Metal Gears
* High Torque
* Dust and Water Proof
* Great for 1/8 Cars or Boats Where Higher Torque and Speed are Needed.
* One year warranty.
Includes:
* One Digital High Torque Servo w/Small Round Horn
* Four Rectangular Grommets
* Four Brass Bushings
* One "T" Horn Servo Arm
Specifications:
* Speed: .13 sec/60° @ 6.0V
* Torque: 192 oz-in @ 6V
* Weight: 2.1 oz (61g)
* Length: 1.57" (40mm)
* Width: 0.8" (20mm)
* Height: 1.44" (36.6mm)
2 Used Futaba BLS352 Digital Brushless High Torque Servo- $75 each
This is the Futaba BLS352 Brushless Digital High Torque Servo. This servo is an excellent choice for steering on 1/8th scale buggies.
This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
Features: Equipped with a Brushless motor that lasts longer and operates at a lower temperature than Brushed motors 30% Faster response times, smoother operation Samarium Cobalt magnets and dual ball bearings Same power consumption and centering as Digital servos equipped with Brushed motors Standard size Metal gears One-year warranty
Specifications:
Torque: 200 oz-in at 4.8V/250 oz-in at 6.0V
Speed: 0.19 sec/60° at 4.8V/0.15 sec/60° at 6.0V
Size: 1.57 x 0.78 x 1.45" (40 x 20 x 36.8mm)
Weight: 2.2 oz (63g
The Futaba 4PK was only just released and drew a lot of attention from racers due to its rather unique look. The 4PK’s contemporary styling is not only unique, it’s extremely well balanced and ergonomic and because the transmitter only weighs 1.5 pounds, you won’t worry about hand fatigue all the way through a grueling main. Besides the repositionable wheel, you can also adjust the trigger location to fit your finger and programming pluses include 40-model memory, 12-character naming, super-sensitive 2048 resolution and a 4th channel that’s ideal for adjusting front and rear brake bias in monster trucks. And here’s the best part: the 4PK was designed from the beginning as a spread spectrum system, which means the 2.4GHz module is built in, a state-of-the-art receiver is included, and all of the incredible advantages of FASST system technology are at your command!
Features
* Much consideration went into the design of the 4PK’s grip, which is slightly thicker to accommodate larger hands. Besides being lighter, the transmitter’s weight is well balanced for added comfort.
* Achieve perfect “feel” in seconds with the Advanced Positioning Adapter. You can drop the wheel down, move it left or right, even change the angle – a feature many drivers have requested.
* The trigger position can also be shifted by as much as 7mm. This allows you to customize the radio for sharper response based on finger size.
* The redesigned keypad features a large 4-direction jog button for quick access and scrolling. Important functions can be assigned to buttons on the wheel housing to keep them within easy reach.
* Not only is the backlit LCD screen large enough for easy reading without eye strain, it’s also angled for instant viewing without having to tilt the transmitter.
* Because the 4PK was engineered from the beginning for 2.4GHz modulation, there’s no long, unwieldy antenna. Instead, the antenna is shorter and lighter in weight, folds down for easy storage, and pivots for optimum reception.
* No NiCd battery here – the 4PK comes with an 1700mAh NiMH pack that’s comparable in size, but with almost twice the capacity. That means about TWO HOURS of operation on a single charge – enough for the longest of mains and maybe even an entire weekend of racing!
* The included R604FS receiver features Dual Antenna Diversity (DAD) for reliability and security. Its compact size (1.54 x 1.02 x .55 inches) and weight (0.49 ounces) lets you use it in the tightest installations.
* “New Driver”, “Race-Ready”, “Expert” and “Big Car” menus that add functions based on driving skill level and experience
* Throttle Mode Select, for selecting acceleration/brake servo neutral points between 70/30 for nitro or 50/50 for electrics
* Vibrating alert system
* “Direct Select” single-button access to eight preassigned functions
* Navigation Lap Timer that sounds when target lap time is exceeded
* Servo Display Screen shows set-ups/mixes for individual servos (Expert Menu)
* Throttle programming options, including 5-point curve, Expo and VTR
4PK Specifications:
* 40-model memory
* 10-character model naming
* 4th channel for brake bias, throttle adjustments, etc.
* 2 programmable mixes
* Assignable button, trims and dials
* Digital trims and dials
* Advanced Positioning Adapter (APA)
* Adjustable trigger location
* Backlit 128 x 64 white LCD screen with adjustable contrast
* Subtrims, servo reversing and EPA on all channels
* Fail safe
* DSC (Direct Servo Control)
* Exponential & Adjustable Servo Speed (Steering/Throttle)
* Up/Down, Lap & Systems timers
* 100-lap memory
* ATL (Electronic & Mechanical)
* Traction Control/Acceleration Rate
* ABS braking system
* Boat mixing
* Idle-Up
* Tx NiMH and Dual-Output Charger
2 Used Futaba R604FS 2.4Ghz FASST 4-Channel Receiver (4PK)-$80 each SOLD
This is the Futaba 2.4GHz R604FS 4-Channel Receiver with FASST (Futaba Advanced Spread Spectrum Technology) Technology for use with Futaba 4PK 2.4GHz FASST transmitter or the Futaba 3PK radio with FASST transmitter module systems. Unlike less reliable single antenna receivers, Futaba employs an antenna diversity system-one internal and one external antenna on the R604FS receiver to eliminate dead spots anywhere on the track
The included R604FS receiver features Dual Antenna Diversity (DAD) for reliability and security. Its compact size (1.54 x 1.02 x 0.55 inches) and weight (0.49 ounces) lets you use it in the tightest installations.
3 Used Futaba S9351 Digital High Torque Servo- $60 each
This is the S9351 Digital Servo w/Two Ball Bearings for Car and Boat Use and Comes with "J" Connector Pre-Installed. Metal case acts as a Heat Sink to reduce Heat and is designed to be Water and Dust Proof.
Features:
* Comes with Heavy Duty wiring that can handle Higher Current Loads.
* New Metal casing which helps to dissipate heat.
* Coreless Motor
* Dual Ball Bearing Output Shaft
* Metal Gears
* High Torque
* Dust and Water Proof
* Great for 1/8 Cars or Boats Where Higher Torque and Speed are Needed.
* One year warranty.
Includes:
* One Digital High Torque Servo w/Small Round Horn
* Four Rectangular Grommets
* Four Brass Bushings
* One "T" Horn Servo Arm
Specifications:
* Speed: .13 sec/60° @ 6.0V
* Torque: 192 oz-in @ 6V
* Weight: 2.1 oz (61g)
* Length: 1.57" (40mm)
* Width: 0.8" (20mm)
* Height: 1.44" (36.6mm)
2 Used Futaba BLS352 Digital Brushless High Torque Servo- $75 each
This is the Futaba BLS352 Brushless Digital High Torque Servo. This servo is an excellent choice for steering on 1/8th scale buggies.
This servo can produce high-current draw from your batteries. If using NiMH or LiPo batteries, make sure they are capable of delivering sufficient amps.
Features: Equipped with a Brushless motor that lasts longer and operates at a lower temperature than Brushed motors 30% Faster response times, smoother operation Samarium Cobalt magnets and dual ball bearings Same power consumption and centering as Digital servos equipped with Brushed motors Standard size Metal gears One-year warranty
Specifications:
Torque: 200 oz-in at 4.8V/250 oz-in at 6.0V
Speed: 0.19 sec/60° at 4.8V/0.15 sec/60° at 6.0V
Size: 1.57 x 0.78 x 1.45" (40 x 20 x 36.8mm)
Weight: 2.2 oz (63g
Last edited by jpalessi; 01-25-2010 at 08:23 PM.
01-19-2010, 11:14 AM
#2
4pk
Pm'd you.
01-19-2010, 02:20 PM
#4
you have a PM
01-19-2010, 08:12 PM
#8
YGPM
01-21-2010, 09:47 AM
#12
YGPM.
